Abstract:The backhaul forwards aggregated traffic from massive users, machines, and sensors to the core network, and is the key infrastructure to facilitate a smart city. The beamforming and spatial multiplexing technologies enable the wireless multipoint-to-point backhaul to connect dense small cell eNodeBs (eNBs) and macrocell eNBs. Because the spatial characteristics of the backhaul channels, such as the angular power spectra and spreads, determine the interference and capacity performance of the backhaul links, accurate 3D channel modeling is vital for the evaluation and comparison of candidate proposals. In this article, the concepts and methodology of spatial channel modeling are first introduced, and the state-of-the-art models developed by the standardization bodies in recent years are surveyed. Then we present a field measurement campaign on the 3D backhaul channels in an urban street, including the channel sounder implementation, field measurement, multipath parameter estimation, and propagation modeling. The Rx of the sounder (emulating a donor eNB) was installed on the rooftop of a five-story building, and the Tx was located along a street and at different altitudes to emulate a relay eNB. The channel angular power spectra in the elevation and azimuth domains were measured, and the impact by the relay's distance and altitude on the angular spreads was evaluated. In addition, a Laplace model is proposed for the power spectra in both domains. This article not only explains the methodology and implementation of the spatial channel measurement, but also reveals the urban wireless backhaul channel characteristics which are useful for the design and deployment of wireless backhaul for a smart city.

Bridging Simulation and Measurements through Ray-Launching Analysis: A Study in a Complex Urban Scenario Environment

An efficient hybrid simulation technique for modeling the electromagnetic field propagation in a closed environment

Radio Channel Modeling and Measurement of a Localization Rescue System

A Novel Ray Tracing Based Multipath Modeling Approach for Site-Specific WLAN Simulations

A Radio Wave Propagation Modeling Method Based on High Precision 3D Mapping in Urban Scenarios

A Measurement Study of Channel Dynamics in Wireless Mesh Networks

A Radio Wave Propagation Modeling Method Based on High-Precision 3-D Mapping in Urban Scenarios

Statistical Analysis of Radio Propagation Channel in Ruins Environment

Ray-Tracing-Based Data Expansion from Limited Sub-THz Channel Measurements in Urban Street

Ray-Tracing Simulation and Verification of Full-Duplex Self-Interference Channels in an Urban Scenario

An Efficient Simulation Technology for Characterizing the Ultra-Wide Band Signal Propagation in a Wireless Body Area Network

Measurement-Based LoS/NLoS Channel Modeling for Hot-Spot Urban Scenarios in UMTS Networks

Towards Bridging the Gap between Near and Far-Field Characterizations of the Wireless Channel

Modeling RIS from Electromagnetic Principles to Communication Systems--Part II: System-Level Simulation, Ray Tracing, and Measurement

Dynamic EM Ray Tracing for Large Urban Scenes with Multiple Receivers

Multi-Scenario Broadband Channel Measurement and Modeling for Sub-6 GHz RIS-Assisted Wireless Communication Systems

Measurement and Modeling of 3D Spatial Wireless Backhaul Channels in NLOS Scenarios

Modeling City-Canyon Pedestrian Radio Channels Based on Passive Sounding in In-Service Networks.

Measurement and Statistical Analysis of 1.89ghz Radio Propagation in a Realistic Mountain Tunnel

Connecting a City by Wireless Backhaul: 3D Spatial Channel Characterization and Modeling Perspectives

Measurements and Ray Tracing Simulations for Non-Line-of-Sight Millimeter-Wave Channels in a Confined Corridor Environment