Beam Pattern Modulation Embedded Hybrid Transceiver Optimization for Integrated Sensing and Communication

Boxun Liu,Shijian Gao,Zonghui Yang,Xiang Cheng,Liuqing Yang

2024-05-16

Abstract:Integrated sensing and communication (ISAC) emerges as a promising technology for B5G/6G, particularly in the millimeter-wave (mmWave) band. However, the widely utilized hybrid architecture in mmWave systems compromises multiplexing gain due to the constraints of limited radio frequency chains. Moreover, additional sensing functionalities exacerbate the impairment of spectrum efficiency (SE). In this paper, we present an optimized beam pattern modulation-embedded ISAC (BPM-ISAC) transceiver design, which spares one RF chain for sensing and the others for communication. To compensate for the reduced SE, index modulation across communication beams is applied. We formulate an optimization problem aimed at minimizing the mean squared error (MSE) of the sensing beampattern, subject to a symbol MSE constraint. This problem is then solved by sequentially optimizing the analog and digital parts. Both the multi-aperture structure (MAS) and the multi-beam structure (MBS) are considered for the design of the analog part. We conduct theoretical analysis on the asymptotic pairwise error probability (APEP) and the Cramér-Rao bound (CRB) of direction of arrival (DoA) estimation. Numerical simulations validate the overall enhanced ISAC performance over existing alternatives.

Signal Processing

What problem does this paper attempt to address?

### Problems Addressed by the Paper

This paper aims to address the issues of multiplexing gain loss due to hybrid architecture and spectral efficiency (SE) degradation caused by additional sensing functions in integrated sensing and communication (ISAC) systems under the millimeter-wave (mmWave) band. Specifically, the paper proposes an optimized beam pattern modulation embedded hybrid transceiver design (BPM-ISAC) to compensate for the reduced spectral efficiency by applying index modulation on communication beams, thereby enhancing sensing performance while ensuring communication performance.

### Main Contributions

1. **Proposed a new BPM-ISAC transceiver design**:
- The ISAC transmitter provides multiple beams for single-user communication and scanning beams for sensing.
- Communication beams are selectively activated to enhance spectral efficiency.

2. **Established an optimization problem**:
- Optimized the analog and digital parts by minimizing the mean square error (MSE) of the sensing beam pattern while satisfying the symbol MSE constraint.
- Considered two typical hybrid structures: multi-aperture structure (MAS) and multi-beam structure (MBS).

3. **Conducted theoretical analysis**:
- Analyzed the complexity and convergence of the algorithm.
- Derived the asymptotic pairwise error probability (APEP) and Cramér-Rao bound (CRB), illustrating the bit error and direction of arrival (DoA) estimation performance.

4. **Performed numerical simulations**:
- Simulation results validated the advantages of the proposed method in ISAC systems.

### Key Technologies

- **Beam Pattern Modulation (BPM)**: Applied index modulation on communication beams to improve spectral efficiency by selectively activating beams.
- **Joint Optimization**: Solved the complex hybrid integer non-convex combinatorial optimization problem by sequentially optimizing the analog and digital parts.
- **Low Complexity Algorithm**: Proposed a two-step beam selection algorithm based on the minimum MSE criterion and a branch-and-bound algorithm for the design of the analog part.

### Conclusion

The BPM-ISAC transceiver design proposed in the paper significantly enhances sensing performance while ensuring communication performance, addressing the issue of spectral efficiency degradation in mmWave ISAC systems. The effectiveness and superiority of the design were validated through theoretical analysis and numerical simulations.