Abstract:We propose and demonstrate accurate 3D real-time indoor localization via broadband nonlinear backscatter in passive devices. The proposed method does not need any relative motion between a reader and a tag or the use of reference anchor nodes. In the conventional radio frequency identification (RFID) system, a passive tag responds to a reader by switching its antenna "on" and "off". The operation of such conventional backscatter is essentially "linear", since the reader-to-tag (downlink) and tag-to-reader (uplink) signals overlap on the same carrier frequency. Although linear backscatter is straightforward, the self-jamming problem caused by strong leakage signals from the transmitter to the receiver is notorious and poses many constraints on the received signal quality, operation bandwidth, modulation flexibility and system complexity. To enable high accuracy real-time 3D indoor localization for passive devices, we show that nonlinear backscatter is more effective than linear backscatter. Nonlinear backscatter exploits nonlinear elements in passive devices to generate second or higher-order harmonics as the uplink response. Separation of downlink and uplink on different carriers allows immediate self-jamming cancellation and direct un-modulated carrier phase decoding, hence resulting in better received signal quality and broad bandwidth of operation, both of which are critical for the localization system. The broad bandwidth allows the design of an efficient phase-based ranging algorithm - heuristic multi-frequency continuous wave (HMFCW) ranging which resolves ambiguous phase cycles with heuristically optimized sparse carrier frequencies. HMFCW ranging can correctly pin down the phase cycle integer with 100% reliability as long as the phase error falls within 90 x BW% (percentage bandwidth). In our present implementation, we achieved a median ranging error below 1 cm under phase error bounds of 50. We realized real-time 3D localization from differential ranging by nonlinear conjugate gradient (CG) search for hyperboloids intersection in a multi-static transceiving system with 1 Tx antenna and 4 Rx antennas. The measured 3D localization median er-ror was 3.5 cm in the indoor environment. Presently, the measurement latency was less than 0.155 seconds. We will present system design, algorithms and a prototype with experimental evaluation.

3D Positioning using a New Diffraction Path Model

Diffraction Aided Wireless Positioning

Line-of-Sight Probability for Outdoor-to-Indoor UAV-Assisted Emergency Networks

Target Tracking in Confined Environments with Uncertain Sensor Positions

Improving Post-Earthquake Emergency Response Using Indoor Tracking

Through-Wall Person Localization Using Transceivers in Motion

3d Real-Time Indoor Localization Via Broadband Nonlinear Backscatter In Passive Devices With Centimeter Precision

UAV-Aided 3D Building Map Reconstruction from RSS Measurements: A Diffraction-Based Approach

Single-Site 3-D Positioning in Multipath Environments Using DOA-Delay Measurements

On the Electromagnetic Diffraction Propagation Model and Applications

Determination of an Indoor Target Position: An Accurate and Adaptable Approach Based on Differential Positioning

A Three-Dimensional Wireless Indoor Localization System

Research on Autonomous and Collaborative Deployment of Massive Mobile Base Stations in High-Rise Building Fire Field

UWB System for Indoor Positioning and Tracking with Arbitrary Target Orientation, Optimal Anchor Location, and Adaptive NLOS Mitigation

Research on UWB indoor 3D positioning algorithm based on the least squares method

Geography-Aware Optimal UAV 3D Placement for LOS Relaying: A Geometry Approach

Finding the Right Place: Sensor Placement for UWB Time Difference of Arrival Localization in Cluttered Indoor Environments

Line-of-Sight Discovery in 3D Using Highly Directional Transceivers

Redefining Recon: Bridging Gaps with UAVs, 360 degree Cameras, and Neural Radiance Fields

Phase-difference-based 3-D Source Localization Using a Compact Receiver Configuration