Abstract:Combining high-throughput first-principles calculations and experimental measurements, we have identified a novel family of fast lithium-ion chalcogenide conductors in Li$_2$BMQ$_4$ (2114, B = Ca, Sr and Ba; M = Si, Ge and Sn; Q = O, S and Se) systems. Our calculations demonstrate that most of the thermodynamically and kinetically stable sulfides and selenides in this new system exhibit ultralow Li$^+$ ion migration activation energy (0.16 eV ~ 0.56 eV) and considerable bandgaps varying between ~ 2 eV and 3.5 eV. We have successfully synthesized Li$_2$BaSnS$_4$ and Li$_2$SrSiS$_4$, and they exhibit excellent moisture stability through H$_2$S gas measurements. Electrochemical impedance measurements indicate 2114 systems show the typical features of solid ionic conductors, with a room-temperature Li$^+$ conductivity close to 5$\times$10$^{-4}$ mS/cm aligning with our molecular dynamics simulations. Furthermore, we have theoretically investigated the substitution of Cl$^-$ at S$^{2-}$ site. The doped compounds display significantly higher conductivity, with an increase of about three orders of magnitude (up to a maximum of 0.72 mS/cm) compared to the undoped compounds. These findings offer valuable insights for the further exploration of potential chalcogenide solid electrolyte materials with robust air stability and enhanced ionic conductivity for practical applications in lithium-ion batteries.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop new air - stable chalcogenide solid - state electrolyte materials in order to overcome the problems of low energy density, poor safety in liquid electrolytes and insufficient air - stability of inorganic electrolyte materials in existing lithium - ion batteries. Specifically, the research objectives are as follows: 1. **Discover new fast lithium - ion conductors**: By combining high - throughput first - principles calculations and experimental measurements, a series of new fast lithium - ion chalcogenide conductors are identified in the Li₂BMQ₄ (B = Ca, Sr and Ba; M = Si, Ge and Sn; Q = O, S and Se) system. 2. **Evaluate the air - stability of materials**: Through theoretical calculations and experimental verification, evaluate the stability of these new materials in air, especially their stability against moisture. This includes testing the moisture stability of materials by H₂S gas measurement and confirming their performance as solid - state electrolytes by electrochemical impedance spectroscopy measurement. 3. **Optimize the ionic conductivity of materials**: The research improves the lithium - ion conductivity of materials by introducing lithium vacancies (such as replacing S²⁻ with Cl⁻). The results show that this doping method can significantly improve the conductivity of materials, up to 0.72 mS/cm, which is about three orders of magnitude higher than that of undoped materials. 4. **Explore the application potential of new materials**: Based on the above research, explore the potential of these new materials in practical lithium - ion battery applications, especially their advantages in providing high ionic conductivity and good air - stability. Through these studies, the paper aims to provide valuable material choices and technical support for the development of next - generation high - performance, safe and sustainable all - solid - state lithium - batteries.

A family of air-stable chalcogenide solid electrolytes in Li$_2$BMQ$_4$ (B = Ca, Sr and Ba; M = Si, Ge and Sn; Q = O, S and Se) systems

Air-stable, high-conduction solid electrolytes of arsenic-substituted Li4SnS4

First-Principles Study on a New Chloride Solid Lithium-Ion Conductor Material with High Ionic Conductivity

Insights into the Electrochemical Stability and Lithium Conductivity of Li4MS4 (M = Si, Ge, and Sn).

Motif-Based Exploration of Halide Classes of Li5M10.5M20.5X8 Conductors Using the DFT Method: Toward High Li-Ion Conductivity and Improved Stability

Amorphization of halide solid electrolytes for lithium super-ionic conductivity

Prediction of Novel Trigonal Chloride Superionic Conductors as Promising Solid Electrolytes for All-Solid-State Lithium Batteries

Tuning collective anion motion enables superionic conductivity in solid-state halide electrolytes

New insights into aliovalent substituted halide solid electrolytes for cobalt-free all-solid state batteries

Chemistry Design Towards a Stable Sulfide‐Based Superionic Conductor Li4Cu8Ge3S12

Halogen Doping Mechanism and Interface Strengthening in the Na3SbS4 Electrolyte via Solid-State Synthesis

A Series of Ternary Metal Chloride Superionic Conductors for High‐Performance All‐Solid‐State Lithium Batteries

Halide solid-state electrolyte achieving high ionic conductivity by engineering nanocrystals

Li-Fe-Cl Families as Novel Solid Electrolytes for All-Solid-State Batteries

Incorporation of halogens (Cl, Br, and I) in an Li–P–S–O system for exploring new sulfide solid electrolytes with high conductivity and superior electrochemical performance in solid-state batteries

Sn-doped thioantimonate superionic conductors with high air stability and enhanced Li-ion conduction for all-solid-state lithium batteries

Design of phase-structure for sodium chloride solid electrolytes with outstanding performance: First-principles approach

Theoretical Insights on the Comparison of Li-Ion Conductivity in Halide Superionic Conductors Li3MCl6, Li2M2/3Cl4, and LiMCl4 (M = Y, Sc, Al, and Sm)

Theoretical Design of Solid Electrolytes with Superb Ionic Conductivity: Alloying Effect on Li+ Transportation in Cubic Li6PA5X Chalcogenides

Experimental Corroboration of Lithium Orthothioborate Superionic Conductor by Systematic Elemental Manipulation