Abstract:We present a novel, power- & hardware-efficient, multiuser, multibeam RIS (Reflective Intelligent Surface) architecture for multiuser MIMO, especially for very high frequency bands (e.g., high mmWave and sub-THz), where channels are typically sparse in the beamspace and LOS is the dominant component. The key module is formed by an active multiantenna feeder (AMAF) with a small number of active antennas, placed in the near field of a RIS with a much larger number of passive controllable reflecting elements. We propose a pragmatic approach to obtain a steerable beam with high gain and very low sidelobes. Then K independently controlled beams can be achieved by closely stacking K such AMAF-RIS modules. Our analysis includes the mutual interference between the modules and the fact that, due to the delay difference of propagation through the AMAF-RIS structure, the resulting channel matrix is frequency selective even for pure LOS propagation. We consider a 3D geometry and show that "beam focusing" is in fact possible (and much more effective in terms of coverage) also in the far-field, by creating spotbeams with limited footprint both in angle and in range. Our results show that: 1) simple RF beamforming (BF) without computationally expensive baseband multiuser precoding is sufficient to practically eliminate multiuser interference when the users are chosen with sufficient angular/range separation, thanks to the extremely low sidelobe beams; 2) the impact of beam pointing errors with standard deviation as large as 2.5 deg and RIS quantized phase-shifters with quantization bits > 2 is essentially negligible; 3) The proposed architecture is more power efficient & much simpler from a hardware implementation viewpoint than standard active arrays with the same BF performance. We show also that the array gain of the proposed AMAF-RIS structure is linear with the RIS aperture.

A Modular Pragmatic Architecture for Multiuser MIMO with Array-Fed RIS

A New Old Idea: Beam-Steering Reflectarrays for Efficient Sub-THz Multiuser MIMO

A Robust Deep Learning-Based Beamforming Design for RIS-Assisted Multiuser MISO Communications with Practical Constraints

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Joint Hybrid 3D Beamforming Relying on Sensor-Based Training for Reconfigurable Intelligent Surface Aided TeraHertz-Based Multiuser Massive MIMO Systems

Reconfigurable Intelligent Surface Aided Non-Coaxial OAM Transmission for Capacity Improvement.

Beam Selection for RIS-Enabled Terahertz Multi-User MIMO Systems via Multi-Task Learning

Beamforming Design for Multiuser Transmission Through Reconfigurable Intelligent Surface.

Robust Beamformer Design in Active RIS-Assisted Multiuser MIMO Cognitive Radio Networks

Multi-user passive beamforming in RIS-aided communications and experimental validations

Multi-Beam Design for Near-Field Extremely Large-Scale RIS-Aided Wireless Communications

Wideband Beamforming for RIS Assisted Near-Field Communications

A Practical Beamforming Design for Active RIS-assisted MU-MISO Systems

Broad Beam Reflection for RIS-Assisted MIMO Systems with Planar Arrays

Mix-and-Conquer: Beamforming Design with Interconnected RIS for Multi-User Networks

Joint Transmit Waveform and Passive Beamforming Design for RIS-Aided DFRC Systems

Novel RIS-Aided Receive Spatial Modulation via Joint Active and Passive Beamforming

Low-Complexity Channel Estimation and Passive Beamforming for RIS-Assisted MIMO Systems Relying on Discrete Phase Shifts

Location-Based Beamforming Design for Multi-Layer RIS Assisted MIMO

Next-Generation RIS: from Single to Multiple Functions

Energy-Efficient Robust Beamforming for Multi-Functional RIS-Aided Wireless Communication under Imperfect CSI