Abstract:This paper presents the phase stability, opto-electronic and thermo-electric behavior of X2AuYZ6 (X = Cs, Rb; Z = Cl/Br/I) double perovskite halides by using the DFT method. The compounds belong to the cubic arrangement and are verified by the tolerance and octahedral factor. Formation enthalpy and binding energy meet the requirements of structural stability. The ductility behavior was also confirmed by the Cauchy pressure, Pugh's ratio, and Poisson's ratio. The positive frequency of phonon dispersion except Rb2AuYI6 compound shows the dynamical stability and the negative formation energy of each identified competing phase confirms the thermo-dynamic equilibrium of all compounds. The band gap values of 2.85(2.91), 2.35(2.40), and 1.74(1.78) eV of Cs2AuYZ6 (Rb2AuYZ6) [Z = Cl, Br, I) double perovskites has been explored in the context of optoelectronic properties, and the results show that these materials might be useful in such devices. The spectral optical response covers the visible-to-UV area, which governs the solar cell and thermo-electric device applications. A comprehensive study of thermo-electric properties such as the thermal conductivity (electrical and electronic part), carrier concentration, thermo-power, and figure of merit was also observed. The investigated compounds [Cs (Rb)-based] exhibit ZT values of 0.51(0.55), 0.53(0.62), and 0.58(0.75) at room temperature with Cl, Br, and I respectively. Additional routine work was also done on the thermo-mechanical characteristics. These studies provide in-depth knowledge of these materials in preparation for their future use.

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on two aspects: 1. **Material selection in photovoltaic applications**: As the global energy problem becomes increasingly severe, it is extremely important to find green and sustainable energy alternatives. Photovoltaic materials play a crucial role in solar energy conversion. However, existing photovoltaic materials such as lead - based halide perovskites have toxicity and stability issues, which limit their wide - spread applications. Therefore, this research aims to explore lead - free double - perovskite materials \(X_2\text{Au}YZ_6\) (where \(X = \text{Cs}, \text{Rb}\); \(Z=\text{Cl}, \text{Br}, \text{I}\)) as potential photovoltaic materials to overcome the limitations of existing materials. 2. **Optimization of thermoelectric performance in waste heat management**: Besides photovoltaic applications, this research also focuses on the thermoelectric performance of these materials in waste heat recovery. Thermoelectric materials can directly convert waste heat into electrical energy and are an important green energy technology. Through density functional theory (DFT) calculations, this research evaluates the thermoelectric performance of these double - perovskite materials, especially their thermal conductivity, carrier concentration, thermoelectric potential, and figure - of - merit (ZT value), in the hope of discovering new materials with high ZT values and improving the thermoelectric conversion efficiency. Specifically, the goal of this research is to comprehensively evaluate the phase stability, electronic structure, optical properties, and thermodynamic properties of these double - perovskite materials through the DFT method, thereby providing theoretical basis and experimental guidance for future photovoltaic and thermoelectric applications. These materials are structurally in a cubic arrangement. By calculating parameters such as formation enthalpy, binding energy, Cauchy pressure, Pugh ratio, and Poisson's ratio, their structural stability is verified. In addition, by calculating phonon dispersion relations and partial density of states, the dynamic stability and thermodynamic equilibrium state of these materials are further confirmed. In conclusion, through systematic research, this paper aims to provide scientific basis and technical support for the development of new - type photovoltaic and thermoelectric materials that are efficient, stable, and environmentally friendly.

DFT mediated X2AuYZ6 (X= Cs, Rb; Z= Cl, Br, I) double Perovskites for photovoltaic and wasted heat management device applications

DFT aided prediction of phase stability, optoelectronic and thermoelectric properties of A2AuScX6 (A= Cs, Rb; X= Cl, Br, I) double perovskites for energy harvesting technology

DFT exploration of elastic, optoelectronic, and thermoelectric properties of stable and eco-friendly double perovskites Cs2YAuX6 (X=Cl, Br) for green energy applications

DFT Insight on Future Prospects of Double Perovskites A2YCuZ6 (A = Rb, Cs and Z = Cl, Br) for Energy Conversion Technologies

DFT study of halogen based double perovskite Na2AgAlX6 (X = Cl, Br, I) double perovskites for energy harvesting applications

Effect of position occupancy of different elements on the structural stability, optoelectronic, thermoelectric and elastic properties of Cs 2 CuAsX 6 (X: Cl, Br, I) halide double perovskite: DFT analysis

Elevating energy device potential: exploring optoelectronic and thermoelectric advantages in stable double perovskites K2NaInX6 (X = F, Cl, Br, I) via Ab initio analysis

Insight into the structural, elastic, phonon dispersions, and optoelectronic properties of Cs 2 YXCl 6 (X = In, Tl) double perovskites for solar cells and energy conversion applications

A DFT investigation of lead-free Rb2YCuX6 (X = Cl, Br, I) perovskites for potential applications in solar cells and thermoelectric devices

Insight into the Structural, Elastic, Phonon Dispersions, and Optoelectronic Properties of Cs2YXCl6 (X = In, Tl) Double Perovskites for Solar Cells and Energy Conversion Applications

Impact of Halide Ion Occupancy on Thermodynamic, Mechanical, Electro-optic, and Electron Transport Characteristics of Rb2CuAsX6 (X = F, Cl, Br) Double Perovskites Using Density Functional Theory

Tailoring the physical, optoelectronic and transport properties of novel lead-free Sodium perovskites Na 2 TeX 6 (X = Cl, Br, I) using DFT computation for photovoltaic and thermal devices

Investigation of the lead-free double perovskites Cs2AgSbX6 (X= Cl, Br, I) for optoelectronic and thermoelectric applications

DFT study of mechanical, optoelectronic, and thermoelectric characteristics of double perovskites Li2CuTiZ6 (Z = Cl, Br, I) for energy harvesting technology

The Lead-free Double Perovskites K2LiTlX6 (X = Cl, Br, I) as an Emerging Aspirant for Solar Cells and Thermoelectric Energy Applications

First-principles calculations to investigate structural, mechanical, electronic, optical, and thermoelectric properties of novel cubic double Perovskites X2AgBiBr6 (X=Li, Na, K, Rb, Cs) for optoelectronic devices

DFT exploration of novel direct band gap semiconducting halide double perovskites, A2AgIrCl6 (A = Cs, Rb, K), for solar cells application

First-principles Investigation of Structural, Electronic, Optical and Thermoelectric Performance of Stable Inorganic Double Perovskites A2AlAgBr6 (A=K, Rb, Cs) for Energy Harvesting

Tuning of Band Gap by Anions (Cl, Br, I) of Double Perovskites Rb2AgAsX6 (Cl, Br, I) for Solar Cells and Thermoelectric Applications

Computational insights into transition metal-based BaCoX3 (X = Cl, Br, I) halide perovskites for spintronics, photovoltaics, and renewable energy devices

Investigating the physical properties of Li2AgGaX6 (X = Cl, Br, I) Double Perovskites using ab initio calculations