Establishing Criteria for the Transition from Kinetic to Fluid Modeling in Hollow Cathode Analysis

Willca Villafana,Andrew T. Powis,Sarveshwar Sharma,Igor D. Kaganovich,Alexander V. Khrabrov

2024-04-13

Abstract:In this study, we conduct 2D3V Particle-In-Cell simulations of hollow cathodes, encompassing both the channel and plume region, with an emphasis on plasma switch applications. The plasma in the hollow cathode channel can exhibit kinetic effects depending on how fast electrons emitted from the insert are thermalized via Coulomb collisions. The criterion that determines whether the plasma operates in a Duid or kinetic regime is given as follows. When Coulomb collisions occur at a much greater rate than ionization or excitation events, the Electron Energy Distribution Function relaxes to aMaxwellian distribution and the plasmawithin the channel can be describedwith aDuidmodel. In contrast, if inelastic processes are much faster, then the Electron Energy Distribution Function in the channel exhibits a notable high-energy tail, and a kinetic treatment is required. This criterion is applied to other kinds of hollow cathodes from the literature, revealing that a Duid approach is suitable for most electric propulsion applications, whereas a kinetic treatment might be necessary for plasma switches. Additionally, amomentumbalance reveals that a diffusion equation is sufAcient to predict the plasma plume expansion, a crucial input in the design of hollow cathodes for plasma switch applications.

Plasma Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to determine the criteria for the transition from kinetic modeling to fluid modeling in hollow cathode analysis. Specifically, the authors studied the channel and plume regions of the hollow cathode through 2D3V Particle - In - Cell (PIC) simulations, with a particular focus on plasma switch applications. The paper explored how the electron energy distribution function (EEDF) relaxes to a Maxwellian distribution when the Coulomb collision frequency is much higher than the ionization or excitation event frequency, so that the plasma in the channel can be described using a fluid model. Conversely, if the inelastic processes are faster, the EEDF will exhibit a significant high - energy tail and requires kinetic treatment. In addition, the paper also revealed through momentum balance that the diffusion equation is sufficient to predict the expansion of the plasma plume, which is a key input for the design of hollow cathodes for plasma - switch applications. ### Main problems 1. **Determining the applicable conditions for fluid and kinetic models**: - When the Coulomb collision frequency is much higher than the ionization or excitation event frequency, the plasma can be described using a fluid model. - When the inelastic processes are faster, the plasma requires a kinetic model for description. 2. **Expansion of the plasma plume**: - Through momentum - balance analysis, determine whether the diffusion equation is sufficient to predict the expansion of the plasma plume. ### Formulas - **Maxwellian distribution**: \[ f_{\text{Maxwellian}}(E_k)=\frac{n_{e,c}}{\sqrt{\pi}\left(\frac{E_k}{eT_e}\right)^{3 / 2}}\exp\left(-\frac{E_k}{eT_e}\right) \] where \(n_{e,c}\) is the density of cold electrons, \(E_k\) is the electron kinetic energy, and \(T_e\) is the electron temperature. - **Coulomb collision frequency**: \[ \nu_{ee}=7.7\times 10^{-6}\frac{n_{e,c}\Lambda}{E_f^{3/2}} \] where \(\Lambda\) is the Coulomb logarithm and \(E_f\) is the energy of fast electrons. ### Conclusion Through detailed numerical simulations and theoretical analyses, the paper established the criteria for choosing a fluid model or a kinetic model under different conditions and verified the effectiveness of the diffusion equation in predicting the expansion of the plasma plume. These results are of great significance for the design and optimization of hollow - cathode plasma switches.

Establishing Criteria for the Transition from Kinetic to Fluid Modeling in Hollow Cathode Analysis

Modeling on plasma energy balance and transfer in a hollow cathode

Hollow cathode modeling: I. A coupled plasma thermal two-dimensional model

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Challenges in modelling of non-equilibrium transport processes in high-pressure thermal plasmas

Validation of the smooth step model by particle-in-cell/Monte Carlo collisions simulations

Hollow cathode modeling: II. Physical analysis and parametric study

2-D Modeling Of Orificed Hollow Cathodes Of Stationary Plasma Thrusters Spt-100

Kinetic, 3-D, PIC-DSMC Simulations of Ion Thruster Plumes and the Backflow Region

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers

A two-dimensional hybrid model of the Hall thruster discharge

Kinetic plasma-wall interaction using immersed boundary conditions

A coupled plasma‐thermal model for hollow cathode power decomposition and parametric analysis

Non-Maxwellian electron effects on the macroscopic response of a Hall thruster discharge from an axial-radial kinetic model

Measurements of ion velocity and wave propagation in a hollow cathode plume

Studies on Plasma Transport Processes in the Cathode Sheath of Atmospheric Direct-Current Arc Discharge with Particle-in-cell and Monte Carlo Collision Simulation

Two-dimensional hybrid-direct kinetic simulation of a Hall thruster discharge plasma

Particle-in-cell and Monte Carlo Collision Simulations of the Cathode Sheath in an Atmospheric Direct-Current Arc Discharge

Energy and Mass Transport Properties in the Near-Cathode Region of Atmospheric Thermal Plasma

Kinetic Simulation of the Plasma Formation in the Vacuum Gap with CuCr50 Cathode

2D Particle-in-cell/monte Carlo Collisional Simulation of the Plasma Initiation in the Vacuum Breakdown Stage