Abstract:Solid oxide electrolysis cells (SOECs) enable the integration of H2O/CO2 co-electrolysis and methanation reactions in a single reactor. The product gas may therefore potentially be sent directly to the existing natural gas pipelines. However, current power-to-methane (P2M) routes are not able to achieve acceptable CO2-to-CH4 conversion in a single SOEC reactor for direct integration into natural gas networks. In order to obtain higher CO2-to-CH4 conversions, a two-dimensional multiscale electro-thermo tubular SOEC model was developed to describe in detail the P2M processes along the whole cell and optimize the materials, flow modes, and operating conditions for CH4 production. The numerical simulations revealed that the stabilized Zr-based SOEC is unable to offer a sufficiently high electrochemical performance at methanation-favoring temperatures (250-650 degrees C). Such a temperature mismatch limits the peak CH4 production ratio in the tubular-stabilized Zr-based SOEC (with an inlet CO2 content of 20%) to only 13% at 1.5 V. In contrast, a tubular strontium and magnesium doped lanthanum gallate (LSGM)-based SOEC showed remarkable performance at or below 650 degrees C, improving the CH4 production ratio to over 50% at 550 degrees C and 1.3 V for the same inlet gas composition. However, the operating temperature was still too high to obtain an acceptable CO2-to-CH4 conversion for direct supply to natural gas pipelines. The model revealed that the H2O/CO2 co-electrolysis and methanation reactions can be synchronously enhanced by feeding a cold gas in counter-flow mode under pressurized conditions. At 29 bar, the tubular LSGM-based SOEC could achieve a CO2-to-CH4 conversion ratio of 98.7%, with an electricity-to-gas efficiency of 94.5% in the thermal neutral mode. The produced gas can be directly sent to the existing natural gas pipelines so that the curtailed renewable power can be stored more efficiently and utilized over a wider area.

Methane and oxygen from energy-efficient, low temperature in situ resource utilization enables missions to Mars

Plasma-based conversion of martian atmosphere into life-sustaining chemicals: The benefits of utilizing martian ambient pressure

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Application and Performance Estimation of Mg/CO2 Engine on Mars

Designing the bioproduction of Martian rocket propellant via a biotechnology-enabled in situ resource utilization strategy

Potential for Aerobic Methanotrophic Metabolism on Mars

Liquid Metal-CO2 Battery Bridged Intermittent Energy Conversion and O2 Production in the Martian Atmosphere

A Membrane Reactor with Microchannels for Carbon Dioxide Reduction in Extraterrestrial Space

Microchannel Reactor for Extraterrestrial in Situ Resource Utilization

Ignition and Combustion of Magnesium Particles in Carbon Dioxide

In situ resource utilization of lunar soil for highly efficient extraterrestrial fuel and oxygen supply

Reaction Kinetics of an Mg/CO2 Power System for Mars Exploration

Assessment of the technological viability of photoelectrochemical devices for oxygen and fuel production on Moon and Mars

Direct Conversion of Methane with O2 at Room Temperature over Edge-Rich MoS2

Production of Sustainable Methane from Renewable Energy and Captured Carbon Dioxide with the Use of Solid Oxide Electrolyzer: A Thermodynamic Assessment

Automated synthesis of oxygen-producing catalysts from Martian meteorites by a robotic AI chemist

High-rate Electrochemical Partial Oxidation of Methane in Solid Oxide Fuel Cells

A Robust Fuel Cell Operated on Nearly Dry Methane at 500 °C Enabled by Synergistic Thermal Catalysis and Electrocatalysis

Synchronous Enhancement of H2O/CO2 Co-Electrolysis and Methanation for Efficient One-Step Power-to-methane

Methanogens and what they tell us about how life might survive on Mars

Study on the Conversion Mechanism of CO2 to O2 in Pulse Voltage Dielectric Barrier Discharge at Martian Pressure