Leveraging A Variety of Anchors in Cellular Network for Ubiquitous Sensing

Liang Liu,Shuowen Zhang,Shuguang Cui

2024-03-26

Abstract:Integrated sensing and communication (ISAC) has recently attracted tremendous attention from both academia and industry, being envisioned as a key part of the standards for the sixth-generation (6G) cellular network. A key challenge of 6G-oriented ISAC lies in how to perform ubiquitous sensing based on the communication signals and devices. Previous works have made great progresses on studying the signal waveform design that leads to optimal communication-sensing performance tradeoff. In this article, we aim to focus on issues arising from the exploitation of the communication devices for sensing in 6G network. Particularly, we will discuss about how to leverage various nodes available in the cellular network as anchors to perform ubiquitous sensing. On one hand, the base stations (BSs) will be the most important anchors in the future 6G ISAC network, since they can generate/process radio signals with high range/angle resolutions, and their positions are precisely known. Correspondingly, we will first study the BS-based sensing technique. On the other hand, the BSs alone may not enable ubiquitous sensing, since they cannot cover all the places with strong line-of-sight (LOS) links. This motivates us to investigate the possibility of using other nodes that are with higher density in the network to act as the anchors. Along this line, we are interested in two types of new anchors - user equipments (UEs) and reconfigurable intelligent surfaces (RISs). This paper will shed light on the opportunities and challenges brought by UE-assisted sensing and RIS-assisted sensing. Our goal is to devise a novel 6G-oriented sensing architecture where BSs, UEs, and RISs can work together to provide ubiquitous sensing services.

Signal Processing,Information Theory

What problem does this paper attempt to address?

The main problem this paper attempts to address is how to achieve ubiquitous sensing using communication signals and devices in sixth-generation (6G) cellular networks. Specifically, the paper focuses on how to utilize various nodes as anchors to perform extensive sensing tasks in 6G networks. The main points of the paper are as follows:

1. **Utilizing Base Stations (BSs) for Sensing**:
- Base stations, due to their high-resolution signal processing capabilities and known precise locations, are considered the most important type of anchor in future 6G Integrated Sensing and Communication (ISAC) networks.
- However, relying solely on base stations may not achieve full coverage, as their deployment density is insufficient to cover all areas.

2. **Utilizing User Equipment (UEs) for Assisted Sensing**:
- The paper explores how to use user equipment (such as smartphones and tablets) as anchors to improve the density and accuracy of sensing.
- The advantage of UEs lies in their high-density deployment, which can capture the radar cross-section (RCS) of targets from different directions, thereby enhancing sensing performance.

3. **Utilizing Reconfigurable Intelligent Surfaces (RISs) for Assisted Sensing**:
- RISs can serve as passive anchors, extending the sensing range of base stations by reflecting signals.
- When there is no line-of-sight (LOS) path between the base station and the target, RISs can be deployed at known locations to help reflect the target's signal back to the base station, thereby achieving localization.

4. **Networked Sensing**:
- The paper also discusses the possibility of networked sensing through the collaboration of multiple base stations, which can improve the accuracy of environmental estimation by sharing local sensing information.
- A key challenge of networked sensing is the data association problem, i.e., how to correctly match the echo signals received by multiple base stations to the corresponding targets.

5. **Technical Challenges and Solutions**:
- **Time Offset (TOs)**: Due to the asynchrony between base stations and user equipment, effective methods need to be proposed to mitigate the impact of time offset on distance-based localization.
- **Anchor Position Errors**: The location information of user equipment may have significant errors, requiring algorithms to select UEs with accurate location information as anchors.
- **Range and Angle Estimation of Passive Anchors**: As passive anchors, RISs cannot directly process received signals, so base stations need to use specific signal processing methods to estimate the distance and angle between the target and the RIS.

In summary, this paper aims to construct a 6G network architecture capable of providing ubiquitous sensing services by comprehensively utilizing base stations, user equipment, and reconfigurable intelligent surfaces.