Optimal Operation of Reconfigurable Active Distribution Networks Aiming at Resiliency Improvement

Saeed Behzadi,Amir Bagheri,Abbas Rabiee

DOI: https://doi.org/10.1109/ICTEM56862.2023.10083918

2024-03-26

Abstract:As natural disasters bring about power outage and financial losses, network resiliency is an important challenge for distribution network operators (DNOs). On the other side, power loss reduction during normal operating condition is a major concern of DNOs. In this paper, optimal scheduling of active distribution network (ADN) is addressed through simultaneous minimization of power loss in normal condition and load shedding in critical condition after natural disasters. A new formulation is developed for the network reconfiguration to optimize the system operation in both normal and emergency conditions in the presence of conventional and renewable-energy-based distributed generation (DG) as well as energy storage systems (ESSs). The line flow based (LFB) algorithm is used for the AC power flow calculations, and all the developed relations have been convexified to construct a mixed-integer quadratically-constrained programming (MIQCP) optimization model. The simulations have been implemented on the IEEE 33-bus system in GAMS, and the results are investigated.

Systems and Control

What problem does this paper attempt to address?

The problem that this paper attempts to solve is in the reconfigurable active distribution network (ADN), how to optimize the dispatch of distributed energy resources (DERs), including traditional and renewable - energy - based distributed generation (DG) and energy storage systems (ESSs), to simultaneously reduce power losses under normal operating conditions and minimize load shedding under emergency conditions after natural disasters, thereby improving the resiliency of the system. Specifically, the paper proposes a new convex optimization model to achieve the optimal operation of the system under normal and emergency conditions through network reconfiguration and optimal micro - grid formation strategies. This model uses the line - flow - based (LFB) algorithm for AC power flow calculation and constructs a mixed - integer quadratic constraint programming (MIQCP) optimization model to ensure the convexity of the model and facilitate solution.

The main objective functions of the paper include two parts:
1. Minimization of power losses under normal conditions, as shown in equation (2):
\[ \text{OF}_1 = \sum_{t \in \Omega_T} \sum_{(i,j) \in \Omega_L} R_{i,j} J_{i,j,c_1,t} \]
2. Minimization of total load shedding under emergency conditions, as shown in equation (3):
\[ \text{OF}_2 = \sum_{t \in \Omega_T} \sum_{i \in \Omega_N} P_{\text{Lsh},i,c_2,t} \]

These two objective functions are combined through a comprehensive objective function, as shown in equation (1):
\[ \text{OF} = \frac{\text{OF}_1 + \text{OF}_2}{\min(\text{optimumOF}_1, \text{optimumOF}_2)} \]

In addition, the paper also considers various constraints, including power flow equations, radiality constraints, load shedding constraints, synchronous generator constraints, constraints of energy storage systems and wind turbines, as well as the definition and calculation method of the system resiliency index.

Through simulation verification on the IEEE 33 - node system, this model can effectively improve the normal operating efficiency of the system and the resiliency under emergency conditions.