Abstract:The vibration analysis of the bearing is very crucial because of its non-stationary nature and low signal-to-noise ratio. Therefore, a novel scheme for detecting bearing defects is put forward based on the extraction of single-valued neutrosophic cross-entropy (SVNCE) to address this issue. Initially, the artificial hummingbird algorithm (AHA) is used to make the feature mode decomposition (FMD) adaptive by optimizing its parameter based on a newly developed health indicator (HI) i.e. sparsity impact measure index (SIMI). This HI ensures full sparsity and impact properties simultaneously. The raw signals are disintegrated into different modes by adaptive FMD at optimal values of its parameters. The energy of these modes is calculated for different health conditions. The energy interval range has been decided based on energy eigen which are then transformed into single-valued neutrosophic sets (SVNSs) for unknown defect conditions. The minimum argument principle employs the least SVNCE values between SVNSs of testing samples (obtained from unknown bearing conditions) and SVNSs of training samples (obtained from known bearing conditions) to recognize the different defects in the bearing. It has been discovered that the suggested methodology is more adept at identifying the various bearing defects.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the signal processing challenges in bearing fault diagnosis. Specifically, due to the non - stationary characteristics and low signal - to - noise ratio of bearing vibration signals, traditional fault detection methods have deficiencies in terms of accuracy and reliability. Therefore, this paper proposes a new method based on Feature Mode Decomposition (FMD), by introducing Single - Valued Neutrosophic Cross - Entropy (SVNCE) to improve the accuracy of bearing fault detection. ### Background of the Paper and Problem Description 1. **Importance of Bearings** - Bearings are widely used rotating parts in industrial equipment, used to support rotating shafts and reduce friction. - Bearing failures may lead to a decline in equipment performance and even cause catastrophic consequences. 2. **Limitations of Existing Methods** - Traditional vibration analysis techniques (such as band - pass filters, spectral kurtosis, fast Kurtogram, minimum entropy deconvolution, etc.) have limited effectiveness in dealing with non - stationary signals and high - noise environments. - Common signal decomposition techniques (such as Empirical Mode Decomposition (EMD), Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD), etc.) have made some progress, but still have problems such as mode mixing and end - point effects. 3. **Advantages of Feature Mode Decomposition (FMD)** - FMD is a non - recursive decomposition technique based on FIR filter banks and maximum correlated kurtosis deconvolution theory. - FMD performs well in processing signals in noisy environments and can detect impulsive and periodic features simultaneously. ### The Method Proposed in the Paper 1. **Adaptive FMD** - Optimize the parameters of FMD (the number of modes \( K \) and the filter length \( L \)) through the Artificial Hummingbird Algorithm (AHA) to make it adapt to the changes of the input signal. - A new Health Indicator (HI), namely the Sparsity Impact Measure Index (SIMI), is introduced to guide the optimization process. 2. **Construction of the Health Indicator (HI)** - HI combines Approximate Entropy (ApEn) and Kurtosis Index (KI), which respectively reflect the sparsity and impact characteristics of the signal. - The smaller the value of SIMI, the better the sparsity and impact characteristics of the signal. 3. **Fault Identification Method** - Convert the energy of each decomposed mode into Single - Valued Neutrosophic Sets (SVNSs). - Identify different types of bearing faults by calculating the Symmetric SVNCE between the test samples and the training samples. ### Experimental Verification 1. **Data Collection** - Obtain vibration signals from the pulley of the mine conveyor drive station, with a signal sampling frequency of 19,200 Hz and a duration of 2.5 seconds. - Include vibration signals of normal bearings and faulty bearings. 2. **Signal Decomposition** - Use adaptive FMD to decompose the original signal to obtain different modes. - Select several modes with the smallest SIMI values for further analysis. 3. **Energy Interval Definition** - Calculate the energy of each mode and convert it into SVNS form, and define the energy interval range. 4. **Fault Identification** - Identify different types of bearing faults by calculating the Symmetric SVNCE of SVNS. ### Conclusion The adaptive FMD method proposed in the paper shows higher accuracy and robustness in bearing fault diagnosis, especially when dealing with non - stationary signals and signals in high - noise environments. This method effectively extracts fault features and improves the accuracy of fault identification by optimizing FMD parameters and introducing a new health indicator.

An Adaptive feature mode decomposition based on a novel health indicator for bearing fault diagnosis

An Improved Adaptive Minimum Entropy Deconvolution Method in Bearing Fault Detection

A Novel Method Based on Stepwise Variational Modal Decomposition and Gramian Angular Difference Field for Bearing Health Monitoring

Fault Diagnosis and Health Assessment for Bearings Using the Mahalanobis–Taguchi System Based on EMD-SVD

Adaptive feature mode decomposition method for bearing fault diagnosis under strong noise

New health indicators for the monitoring of bearing failures under variable loads

Iterative feature mode decomposition: A novel adaptive denoising method for mechanical fault diagnosis

Health Management of Bearings Using Adaptive Parametric VMD and Flying Squirrel Search Algorithms to Optimize SVM

Adaptive variational mode decomposition based on artificial fish swarm algorithm for fault diagnosis of rolling bearings

An ameliorated African vulture optimization algorithm to diagnose the rolling bearing defects

Health Indicator of Bearing Constructed by rms-CUMSUM and GRRMD-CUMSUM With Multifeatures of Envelope Spectrum

An Improved Variational Mode Decomposition and Its Application on Fault Feature Extraction of Rolling Element Bearing

A novel scheme based on modified hierarchical time-shift multi-scale amplitude-aware permutation entropy for rolling bearing condition assessment and fault recognition

Bearing fault damage degree identification method based on SSA-VMD and Shannon entropy–exponential entropy decision

A Reliable Health Indicator for Fault Prognosis of Bearings

Early Fault Detection of Bearings Based on Adaptive Variational Mode Decomposition and Local Tangent Space Alignment

New Multifeature Information Health Index (MIHI) Based on a Quasi-Orthogonal Sparse Algorithm for Bearing Degradation Monitoring

Novel Bearing Fault Diagnosis Model Integrated with Dual-Tree Complex Wavelet Transform, Permutation Entropy and Optimized FCM

Bearing Health Monitoring Based on the Orthogonal Empirical Mode Decomposition

Bearing Performance Degradation Assessment and Prediction Based on EMD and PCA-SOM

A new bearing fault diagnosis approach combining sensitive statistical features with improved multiscale permutation entropy method