A chip-integrated comb-based microwave oscillator

Wei Sun,Zhiyang Chen,Linze Li,Chen Shen,Jinbao Long,Huamin Zheng,Luyu Yang,Qiushi Chen,Zhouze Zhang,Baoqi Shi,Shichang Li,Lan Gao,Yi-Han Luo,Baile Chen,Junqiu Liu

2024-03-05

Abstract:Low-noise microwave oscillators are cornerstones for wireless communication, radar and clocks. Optical frequency combs have enabled photonic microwaves with unrivalled noise performance and bandwidth. Emerging interest is to generate microwaves using chip-based frequency combs, namely microcombs. Here, we demonstrate the first, fully integrated, microcomb-based, microwave oscillator chip. The chip, powered by a microelectronic circuit, leverages hybrid integration of a DFB laser, a nonlinear microresonator, and a high-speed photodetector. Each component represents the best of its own class, yet allows large-volume manufacturing with low cost in CMOS foundries. The hybrid chip outputs an ultralow-noise laser of 6.9 Hz linewidth, a microcomb of 10.7 GHz repetition rate, and a 10.7 GHz microwave of 6.3 mHz linewidth -- all three in one entity of 76 mm$^2$ size.The microwave phase noise reaches -75/-105/-130 dBc/Hz at 1/10/100 kHz Fourier offset frequency. Our results can reinvigorate our information society for communication, sensing, timing and precision measurement.

Optics,Applied Physics

What problem does this paper attempt to address?

This paper mainly discusses the implementation of an integrated microcomb-based microwave oscillator. Currently, low-noise microwave oscillators are widely used in wireless communications, radar, clocks, and other fields, while optical frequency comb technology can provide unparalleled noise performance and bandwidth. The paper mentions that although chip-based microcombs have advantages in size, weight, and power consumption, the integration of lasers, photodetectors, and nonlinear microresonators into a single chip has not been achieved in fully integrated microwave oscillators.

The research team successfully demonstrated the first fully integrated microcomb-based photonic microwave oscillator, operating at a frequency of 10.7 GHz. The device integrates a distributed feedback (DFB) laser chip, a high-Q silicon nitride (Si3N4) microresonator chip, and a high-speed photodetector chip. Laser linewidth narrowing was achieved through laser self-injection locking technology, while a coherent pulse train with a repetition rate of 10.7 GHz was formed in the microresonator. The photodetector detected the repetition rate of the microcomb and output a 10.7 GHz microwave carrier with extremely low phase noise.

Each component represents the latest technology in its respective field and can be produced on a large scale at low cost using mature CMOS processes. The device occupies only 76 square millimeters of area, with a laser linewidth of 6.9 Hz and a microwave carrier linewidth of 6.3 mHz. The phase noise exhibited excellent performance at different Fourier offset frequencies.

The paper also provides detailed descriptions of the characteristics of the laser, microresonator, and photodetector, as well as experimental results including their performance parameters, manufacturing processes, and integration methods. These findings are of great significance in the fields of microwave photonics, ground broadband, traffic control, tracking, analog-to-digital conversion, wireless networks, and electron paramagnetic resonance spectroscopy, and can drive technological innovation in the information society.