Abstract:Higher energy density materials are being pushed by the research community to make lithium-ion batteries a better competitor to chemical fossil fuels for transport applications. This increases potential risk of lithium-ion batteries and therefore safety investigations are highly important for application purposes. Operando Computer Tomography provides a non-destructive investigation method of different abuse mechanisms. Application of X-ray computed tomography (XCT) for studying lithium-ion batteries has gained interest among the research community especially in the past decade [1]. This technique is widely used for ex-situ samples to measure porosity and tortuosity [2], particle size and volume distribution [3] in the graphite anode as well as different cathode materials such as LiCoOx and NiMnCoOx. [4]. In situ measurements of commercial batteries are also often carried out to detect defects induced in a cell by a safety abuse test or manufacturing process [5]. Operando CT of large cells (for example 18650 form factor) is conducted at synchrotron facilities with high flux of high energy photons, however at a cost of details due to the large field of view [6]. Thanks to their high brilliance, synchrotron beam facilitates us to do a full Computed Tomography in a short time. This enables us to measure batteries while being cycled with a reasonable time resolution to record morphological changes. In this presentation we illustrate how one can utilize this ability to investigate abuse mechanisms on an actual commercially available lithium-ion battery from cell level to electrode level. In this work, lab-based and synchrotron X-ray computed tomography is applied to commercial lithium-ion batteries. It is shown how to find most suitable imaging settings to study available lithium-ion batteries on different size scales, from cell level to particle level. We also demonstrate how to optimize contrast as well as both temporal and spatial resolutions to study in-situ and operando processes in a commercial battery using attenuation and phase contrast SXCT. Manufacturing defects and inconsistencies on cell level as well as the electrode and microstructure on material level are shown in our study. Using the presented methodic, some abuse conditions are induced and imaged in operando on a commercially available li-ion battery. In this work, deep discharge mechanism is visualized and quantified in detail for the first time in 4 dimensions. This oral presentation is aimed to present SXCT and lab XCT imaging as an important tool for studying state of safety of lithium-ion batteries from cell level down to particle level. It is shown how to find most suitable imaging settings to study available lithium-ion batteries on different size scales. We also demonstrate how to optimize contrast as well as both temporal and spatial resolutions to study in-situ and operando processes in a commercial battery using attenuation and phase contrast SXCT. Manufacturing defects and inconsistencies on cell level as well as the electrode and microstructure on material level are shown in our study. Moreover, some abuse conditions are imaged in operando in a commercially available li-ion battery. Le Houx, J. and D. Kramer, X-ray tomography for lithium ion battery electrode characterisation — A review. Energy Reports, 2021. 7 : p. 9-14. Eastwood, D.S., et al., The application of phase contrast X-ray techniques for imaging Li-ion battery electrodes. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2014. 324 : p. 118-123. Finegan, D.P., et al., Investigating lithium-ion battery materials during overcharge-induced thermal runaway: an operando and multi-scale X-ray CT study. Phys Chem Chem Phys, 2016. 18 (45): p. 30912-30919. Ebner, M., et al., Tortuosity Anisotropy in Lithium-Ion Battery Electrodes. Advanced Energy Materials, 2014. 4 (5). Patel, D., et al., Thermal Runaway of a Li-Ion Battery Studied by Combined ARC and Multi-Length Scale X-ray CT. Journal of The Electrochemical Society, 2020. 167 (9). Finegan, D.P., et al., In-operando high-speed tomography of lithium-ion batteries during thermal runaway. Nat Commun, 2015. 6 : p. 6924.

A dataset of over one thousand computed tomography scans of battery cells

Detection of Manufacturing Defects in Lithium-Ion Batteries-Analysis of the Potential of Computed Tomography Imaging

Assessing rechargeable batteries with 3D X-ray microscopy, computed tomography, and nanotomography

Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography

X-Ray Computed Tomography (CT) Technology for Detecting Battery Defects and Revealing Failure Mechanisms

Bridging Nano and Micro-scale X-ray Tomography for Battery Research by Leveraging Artificial Intelligence

Compression of Battery X-ray Tomography Data with Machine Learning

Methods for Tomographic Segmentation in Pseudo-Cylindrical Coordinates for Bobbin-Type Batteries

A Gradient Screening Approach for Retired Lithium-Ion Batteries Based on X-ray Computed Tomography Images

Computer-Vision-Based Approach to Classify and Quantify Flaws in Li-Ion Electrodes

Degradation Diagnosis of Lithium-Ion Batteries Considering Internal Gas Evolution

Detecting lithium plating dynamics in a solid-state battery with operando X-ray computed tomography using machine learning

Non‐Destructive Defect Detection in Battery Pouch Cells: A Comparative Study of Scanning Acoustic Microscopy and X‐ray Computed Tomography

Projection-Angle-Sensor-Assisted X-ray Computed Tomography for Cylindrical Lithium-Ion Batteries

The battery failure databank: Insights from an open-access database of thermal runaway behaviors of Li-ion cells and a resource for benchmarking risks

The Application of Industrial CT Detection Technology in Defects inspection of lithium Ion Battery

EVBattery: A Large-Scale Electric Vehicle Dataset for Battery Health and Capacity Estimation

Deformation Analysis of Different Lithium Battery Designs Using the DIC Technique

Computed Tomography Analysis of Li-Ion Battery Case Ruptures

Investigating Degradation Modes in Zn-AgO Aqueous Batteries with $\textit{In-Situ}$ X-ray Micro Computed Tomography

Comprehensive battery aging dataset: capacity and impedance fade measurements of a lithium-ion NMC/C-SiO cell