Weak Reproductive Solutions for a Convection-Diffusion Model Describing a Binary Alloy Solidification Processes

Blanca Climent-Ezquerra,Mario Durán,Elva Ortega-Torres,Marko Rojas-Medar

2024-02-23

Abstract:We study the existence of reproductive weak solutions for a system of equations describing a solidification process of a binary alloy confined into a bounded and regular domain in $\mathbb{R}^3$, having mixed boundary conditions.

Mathematics

What problem does this paper attempt to address?

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Shu-zhou Zhang,Rui-jie Zhang,Xuan-hui Qu,Wei Fang,Ming-zhi Liu

DOI: https://doi.org/10.1016/s1003-6326(13)62742-9

IF: 3.752

2013-01-01

Transactions of Nonferrous Metals Society of China

Abstract:In order to quantitively model the real solidification process of industrial multicomponent alloys, a non-isothermal phase field model was studied for multicomponent alloy fully coupled with thermodynamic and diffusion mobility database, which can accurately predict the phase equilibrium, solute diffusion coefficients, specific heat capacity and latent heat release in the whole system. The results show that these parameters are not constants and their values depend on local concentration and temperature. Quantitative simulation of solidification in multicomponent alloys is almost impossible without such parameters available. In this model, the interfacial region is assumed to be a mixture of solid and liquid with the same chemical potentials, but with different composition. The anti-trapping current is also considered in the model. And this model was successfully applied to industrial Al-Cu-Mg alloy for the free equiaxed dendrite solidification process.
On the existence of solutions for a drift-diffusion system arising in corrosion modelling

Ingrid Lacroix-Violet,Claire Chainais-Hillairet

DOI: https://doi.org/10.48550/arXiv.1212.3279

2012-12-14

Abstract:In this paper, we consider a drift-diffusion system describing the corrosion of an iron based alloy in a nuclear waste repository. In comparison with the classical drift-diffusion system arising in the modeling of semiconductor devices, the originality of the corrosion model lies in the boundary conditions which are of Robin type and induce an additional coupling between the equations. We prove the existence of a weak solution by passing to the limit on a sequence of approximate solutions given by a semi-discretization in time.

Analysis of PDEs
Comparative Analysis of Isothermal and Non-Isothermal Solidification of Binary Alloys Using Phase-Field Model

Rong-zhen Xiao,Guo-sheng An,Chang-sheng Zhu,Zhi-ping Wang,Shi-yin Yang

DOI: https://doi.org/10.1016/s1003-6326(14)63509-3

IF: 3.752

2014-01-01

Transactions of Nonferrous Metals Society of China

Abstract:Based on the entropy function, a two-dimensional phase field model of binary alloys was established. Meanwhile, an explicit difference method with uniform grid was adopted to solve the phase field and solute field controlled equations. And the alternating direction implicit (ADI) algorithm for solving temperature field controlled equation was also employed to avoid the restriction of time step. Some characteristics of the Ni-Cu alloy were captured in the process of non-isothermal solidification, and the comparative analysis of the isothermal and the non-isothermal solidification was investigated. The simulation results indicate that the non-isothermal model is favorable to simulate the real solidification process of binary alloys, and when the thermal diffusivity decreases, the non-isothermal phase-field model is gradually consistent with the isothermal phase-field model.
Diffusion across the interface and equilibrium and growth of phases in alloys

Jorge A. Gordillo

DOI: https://doi.org/10.1007/s10853-023-09286-6

IF: 4.5

2024-01-26

Journal of Materials Science

Abstract:A model describing diffusion across interfaces and civilian transformations in substitutional alloys under isobaric conditions was developed. The model is based on the concept of an ideal alloy. It is postulated that the migration process through the interfaces involves point defects present on the surfaces contiguous to the interfaces. In this way, jumps frequency, from one phase to the other, would be determined by the probability that a particle finds one of these defects and by the probability that the jump has enough energy. The equations of this theoretical model were validated with empirical results. With this model, a new stability criterion was found. It is postulated that equilibrium exists in 2 phases when it is fulfilled that the flow of its components through the interfaces is null, and that the interfaces of each of the phases are at a value of minimum energy. And in the case that the functions are differentiable and that the previous condition is fulfilled, this equilibrium is stable for the case in which its first derivatives with respect to its components is less than or equal to zero. This model could also be applied to describe alloys with more than 2 phases, and more components or materials with a single phase and a single component.

materials science, multidisciplinary
A Monte-Carlo Approach to Cellular-Pattern Evolution for Binary-Alloys During Directional Solidification

JM LIU,ZG LIU,ZC WU

1995-01-01

Abstract:A Monte-Carlo approach of cellular pattern evolution during directional solidification of a binary alloy has been carried out by imposing a non-uniform probability distribution of particle emission from the particle source, as an approach to the contribution of solute redistribution to the interface evolution. Both the bulk and interface diffusion have been involved in the simulation, and coarsening of the cellular patterns with time has been clearly revealed. The remarkable influence of the interface relaxation and the solute redistribution on the profile bf;solidifying interface has been presented.
Modeling of microsegregation in macrosegregation computations

H. Combeau,J. -M. Drezet,A. Mo,M. Rappaz

DOI: https://doi.org/10.1007/bf02651886

1996-08-01

Metallurgical and Materials Transactions A

Abstract:A general framework for the calculation of micro-macrosegregation during solidification of metallic alloys is presented. In particular, the problems of back diffusion in the primary solid phase, of eutectic precipitation at the end of solidification, and of remelting are being addressed for an open system,i.e., for a small-volume element whose overall solute content is not necessarily constant. Assuming that the variations of enthalpy and of solute content are known from the solution of the macroscopic continuity equations, a model is derived which allows for the calculation of the local solidification path (i.e., cooling curve, volume fraction of solid, and concentrations in the liquid and solid phases). This general framework encompasses four microsegregation models for the diffusion in the solid phase: (1) an approximate solution based upon an internal variable approach; (2) a modification of this based upon a power-law approximation of the solute profile; (3) an approach which approximates the solute profile in the primary phase by a cubic function; and (4) a numerical solution of the diffusion equation based upon a coordinate transformation. These methods are described and compared for several situations, including solidification/remelting of a closed/open volume element whose enthalpy and solute content histories are known functions of time. It is shown that the solidification path calculated with method 2 is more accurate than using method 1, and that 2 is a very good approximation in macrosegregation calculations. Furthermore, it is shown that method 3 is almost identical to that obtained with a numerical solution of the diffusion equation (method 4). Although the presented results pertain to a simple binary alloy, the framework is general and can be extended to multicomponent systems.

materials science, multidisciplinary,metallurgy & metallurgical engineering
A New Coupled Model for Alloy Solidification

Daming Li,Ruo Li,Pingwen Zhang

DOI: https://doi.org/10.1360/04za0004

2004-01-01

Science in China Series A Mathematics

Abstract:A new coupled model in the binary alloy solidification has been developed. The model is based on the cellular automaton (CA) technique to calculate the evolution of the interface governed by temperature, solute diffusion and Gibbs-Thomson effect. The diffusion equation of temperature with the release of latent heat on the solid/liquid (S/L) interface is valid in the entire domain. The temperature diffusion without the release of latent heat and solute diffusion are solved in the entire domain. In the interface cells, the energy and solute conservation, thermodynamic and chemical potential equilibrium are adopted to calculate the temperature, solid concentration, liquid concentration and the increment of solid fraction. Compared with other models where the release of latent heat is solved in implicit or explicit form according to the solid/liquid (S/L) interface velocity, the energy diffusion and the release of latent heat in this model are solved at different scales, i.e. the macro-scale and micro-scale. The variation of solid fraction in this model is solved using several algebraic relations coming from the chemical potential equilibrium and thermodynamic equilibrium which can be cheaply solved instead of the calculation of S/L interface velocity. With the assumption of the solute conservation and energy conservation, the solid fraction can be directly obtained according to the thermodynamic data. This model is natural to be applied to multiple (< 2) spatial dimension case and multiple (< 2) component alloy. The morphologies of equiaxed dendrite are obtained in numerical experiments.
Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Jianbao Zhang,Haifeng Wang,Wangwang Kuang,Yachan Zhang,Shu Li,Yuhong Zhao,D. M. Herlach

DOI: https://doi.org/10.1016/j.actamat.2018.01.040

IF: 9.4

2018-01-01

Acta Materialia

Abstract:The thermodynamic extremal principle was applied to model of rapid solidification of non-stoichiometric intermetallic compounds and the Co-xat.%Si alloys (x = 50, 53, 55) were undercooled to test the model. It is the model with but not the model without solute drag that can be derived self consistently in thermodynamics. Unique dual sluggish and abrupt growth stages were found in under cooled Co-53 at.%Si and Co-55 at.%Si alloys. The first (second) sluggish stage is solute-controlled (thermal-controlled). The first (second) abrupt growth stage is ascribed to the sharp occurrence of solute trapping (inverted partitioning) and disorder trapping that initiates the transition from solute-controlled (thermal-controlled) to thermal-controlled (kinetic-controlled) growth. Since the predictions by the current (previous) model with (without) solute drag predicted well (deviate drastically from) the experimental results, solute drag was suggested be significant upon rapid solidification. The current work solved such an open problem, i.e. solute drag in solidification, and is helpful for not only understanding the non-equilibrium phenomena that is of theoretical importance but also controlling the non equilibrium microstructures that is of technological importance. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
A Response to Numerical Benchmark for Solidification of Binary Alloys: Macro-Segregation with Thermo-Solutal Convection

Li Wensheng,Shen Houfa,Liu Baicheng

2012-01-01

Abstract:As a necessary step toward the quantitative predictions of macro-segregation commonly found in metal castings,classical experiments and numerical benchmarks have been used to validate a simplified binary- alloy solidification model.The model consists of fully coupled conservation equations for the transport phenomena （heat transfer,solute redistribution,and melt convection）that lead to macro-segregation in a solidifying ingot with a fixed solid phase.Simulations were performed for solidification of either a Pb-48wt.%Sn or a Sn-5wt.%Pb alloy in a rectangular cavity.The present predictions were compared with experimental data and numerical reference results reported in the literature.Subsequently,the model was applied to a numerical benchmark problem described in the literature for solidification of a Sn-10wt.%Pb alloy.Simulation results for flow velocity,liquid fraction evolution,and macro-segregation maps also were compared with literature predictions,showing similar trends.It is concluded that additional comparisons to experimental results are still required to assess more complex solidification models.
Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

Ruijie Zhang,Tao Jing,Wanqi Jie,Baicheng Liu

DOI: https://doi.org/10.1016/j.actamat.2006.01.029

IF: 9.4

2006-01-01

Acta Materialia

Abstract:To simulate quantitatively the microstructural evolution in the solidification process of multicomponent alloys, we extend the phase-field model for binary alloys to multicomponent alloys with consideration of the solute interactions between different species. These interactions have a great influence not only on the phase equilibria but also on the solute diffusion behaviors. In the model, the interface region is assumed to be a mixture of solid and liquid with the same chemical potential, but with different compositions. The simulation presented is coupled with thermodynamic and diffusion mobility databases, which can accurately predict the phase equilibria and the solute diffusion transportation in the whole system. The phase equilibria in the interface and other thermodynamic quantities are obtained using Thermo-Calc through the TQ interface. As an example, two-dimensional computations for the dendritic growth in Al–Cu–Mg ternary alloy are performed. The quantitative solute distributions and diffusion matrix are obtained in both solid and liquid phases.
A Numerical Method for Sharp-Interface Simulations of Multicomponent Alloy Solidification

Daniil Bochkov,Tresa Pollock,Frederic Gibou

DOI: https://doi.org/10.1016/j.jcp.2023.112494

2023-09-25

Abstract:We present a computational method for the simulation of the solidification of multicomponent alloys in the sharp-interface limit. Contrary to the case of binary alloys where a fixed point iteration is adequate, we hereby propose a Newton-type approach to solve the non-linear system of coupled PDEs arising from the time discretization of the governing equations, allowing for the first time sharp-interface simulations of the multialloy solidification. A combination of spatially adaptive quadtree grids, Level-Set Method, and sharp-interface numerical methods for imposing boundary conditions is used to accurately and efficiently resolve the complex behavior of the solidification front. The convergence behavior of the Newton-type iteration is theoretically analyzed in a one-dimensional setting and further investigated numerically in multiple spatial dimensions. We validate the overall computational method on the case of axisymmetric radial solidification admitting an analytical solution and show that the overall method's accuracy is close to second order. Finally, we perform numerical experiments for the directional solidification of a Co-Al-W ternary alloy with a phase diagram obtained from the PANDAT database and analyze the solutal segregation dependence on the processing conditions and alloy properties.

Computational Physics
Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation

Abdur Rahman Al Azad,Philip Cardiff,David J. Browne

DOI: https://doi.org/10.3390/met13121916

IF: 2.695

2023-11-22

Metals

Abstract:A computational framework is developed to understand the transient behavior of isothermal and non-isothermal transformation between liquid and solid phases in a binary alloy using a phase-field method. The non-isothermal condition was achieved by applying a thermal gradient along the computational domain. The bulk solid and liquid phases were treated as regular solutions, along with introducing an order parameter (phase field) as a function of space and time to describe the interfacial region between the two phases. An antitrapping flux term was integrated into the present phase-field model to mitigate the amount of solute trapping, which is characterized by the non-equilibrium partitioning of the solute. The governing equations for the phase field and the solute composition were solved by the cell-centered finite volume method using the open-source computational tool OpenFOAM. Simulations were carried out for the evolution of equiaxed dendrites inside an undercooled melt of a binary alloy, considering the effect of various computational parameters such as interface thickness, strength of crystal anisotropy, stochastic noise amplitude, and initial orientation. The simulated results show that the solidification morphology is sensitive to the magnitude of anisotropy as well as the amplitude of noise. A strong influence of interface thickness on the growth morphology and solute redistribution during solidification was observed. Incorporating antitrapping flux resulted in the solute partitioning close to the equilibrium value. Simulations show that the grain shape is unaffected by changes to crystallographic orientation with respect to the Cartesian computational grid. Thermal gradients exerted discernible effects on the solute distribution and the dendritic growth pattern. Starting with multiple nucleation events the model predicted realistic polycrystalline solidification and as-solidified microstructure.

materials science, multidisciplinary,metallurgy & metallurgical engineering
A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Daming Li,Ruo Li,Pingwen Zhang

DOI: https://doi.org/10.1109/imsccs.2006.142

2006-01-01

Abstract:A two-dimensional model for the simulation of solidification microstructure in multi-component alloy systems has been developed. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (S/L) interface. The dynamics of the interface is controlled by temperature, solute diffusion and Gibbs-Thomson effects. The diffusion equation for the temperature with release of latent heat on the S/L interface is valid in the entire domain, and the solute diffusion equation is also used in the entire domain through potential functions. Two methods are proposed to calculate the increment of the solid fraction. The first method is based on the level rule method similar to the one proposed by Jacot et al., but without the assumption of uniform temperature on the scale of the calculation domain. The second one is based on the calculation of the S/L interface velocity, which generalizes the results of Nastac and Beltran-Sanchez et al. for two-component alloy systems. If the concentration of one of the solutes tends to zero, both proposed methods reduce to the methods in Jacot et al. and Beltran-Sanchez et al. for two component alloy systems. Mesh independency is achieved by both methods and the dendritic morphologies obtained are the same if the mesh is fine enough. However, the morphologies of equiaxed dendrites calculated by using the interface velocity tends to the stable form more easily than those calculated using the level rule method as the mesh size is refined. For two-component alloy systems, the predictions of LGK theory for the steady-state tip velocity are compared with simulated values as a function of melt undercooling, which shows good agreement at very large range of undercooling. The simulated primary arm spacing in directional solidification is compared with experimental results for Fe-Si-Mg alloys and good agreement is also observed. It is noted that both methods for computing the solid fraction can be used for any multi-component alloy systems provided that the thermodynamic data are given
Solving Free Boundary Problems in Alloy Solidification under Universal Cooling Conditions

Chuanqi Zhu,Yuichiro Koizumi

2024-05-30

Abstract:The kinetics of interfaces in alloy solidification pose a classic free boundary problem. This paper introduces an approach that amalgamates the distinctive characteristics of sharp and diffuse interface models. The motion of the diffuse interface is governed by the phase-field equation featuring a traveling wave function [I. Steinbach, Modell. Simul. Mater. Sci. Eng. 17(7), 073001 (2009)]. To emulate solute rejection in the sharp interface model, the concept of the middle-obstacle and the casting operation are employed. Moreover, the undercooling along the interface normal is flattened to minimize the impact of bulk undercooling in the interface and the associated effects, such as stretching and arc-length diffusion. Notably, the results for interface kinetics under both equilibrium and non-equilibrium conditions closely approximate their analytical solutions, all achieved with artificially wide interfaces and comparatively low computational cost.

Materials Science
Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

Ruijie Zhang,Mei Li,John Allison

DOI: https://doi.org/10.1016/j.commatsci.2009.11.011

IF: 3.572

2010-01-01

Computational Materials Science

Abstract:The industrial alloys, such as steel and aluminum alloy, always contain more than two main solutes. The phase equilibrium and solute diffusion behaviors in multicomponent alloys will be no longer the same as that in binary alloys because of the solute interactions. In order to study the influence of solute interactions on the solidification process, we develop a phase-field model for multicomponent alloy coupled with thermodynamic and diffusion mobility database, which can accurately predict the phase equilibria and solute diffusion transportations. The model is applied to Al–Cu–Mg and Al–Cu–Si systems respectively. There are totally different solute interactions in these two systems, that is, attractive interactions in Al–Cu–Mg alloy and repulsive interactions in Al–Cu–Si alloy. Their influences on the solidification process are quantitatively analyzed from the phase-field simulation results.
Modelling Of The Thermosolutal Convection And Macrosegregation In The Solidification Of An Fe-C Binary Alloy

Z. Q. Han,R. W. Lewis,B. C. Liu

DOI: https://doi.org/10.1108/09615530710730175

2007-01-01

International Journal of Numerical Methods for Heat & Fluid Flow

Abstract:Purpose - The motivation for this work is to establish a model that not only includes the main factors resulting in macrosegregation but also retains simplicity and consistency for the sake of potential application in casting practice.Design/methodology/approach - A mathematical model for the numerical simulation of thermosolutal convection and macrosegregation in the solidification of multicomponent alloys is developed, in which the coupled macroscopic mass, momentum, energy and species conservation equations are solved. The conservation equations are discretized by using the control volume-based finite difference method, in which an up-wind scheme is adopted to deal with the convection term. The alternative direction implicit procedure and a line-by-line solver, based on the tri-diagonal matrix algorithm, are employed to iteratively solve the algebraic equations. The velocity-pressure coupling is handled by using the SIMPLE algorithm.Findings - Based on the present study, the liquid flow near the dendritic front is believed to play an important role in large-scale transport of the solute species. The numerical or experimental results in the literatures on the formation of channel segregation, especially those about the location of the initial flow as well as the morphology of the liquidus front, are well supported by the present investigation.Research limitations/implications - The modelling is limited to dealing with the thermosolutal convection of two-dimensional cases. More complicated phenomena (e.g. crystal movement) and 3D geometry should be considered in future research.Practical implications - The present model can be used to analyze the effects of process parameters on macrosegregation and, with further development, could be applied as a useful tool in casting practice.Originality/value - The numerical simulation demonstrates the capability of the model to simulate the thermosolutal convection and macrosegregation in alloy solidification. It also shows, that the present model has good application potential in the prediction and control of channel segregation.
Incorporating density jumps and species-conserving dynamics in XPFC binary alloys

Matthew J. Frick,Nana Ofori-Opoku,Nikolas Provatas

DOI: https://doi.org/10.1103/PhysRevMaterials.4.083404

2020-05-19

Abstract:This work presents a consistent formulation of the structural phase-field-crystal model of substitutional binary alloys that allows for the description phases of unequal densities, a key feature in solidification. We further develop the dynamics of the model to be consistent with conserved Langevine dynamics in the true governing species densities. Additionally, this work expands on the ability to control pressure, so far only implemented in pure materials, to binary alloys by improving the control system that controls pressure from previous work. We study the equilibrium properties of the new model, and demonstrate that control of pressure can drive various kinematic microscopic processes in materials such as grain boundary pre-melting, phase instability, and grain or inter-phase boundary motion.

Materials Science,Soft Condensed Matter
Finite Element Multi-scale Modeling of Chemical Segregation in Steel Solidification Taking into Account the Transport of Equiaxed Grains

Thi-Thuy-My Nguyen,Charles-André Gandin,Hervé Combeau,Miha Založnik,Michel Bellet

DOI: https://doi.org/10.1007/s11661-018-4496-4

2018-02-14

Metallurgical and Materials Transactions A

Abstract:The transport of solid crystals in the liquid pool during solidification of large ingots is known to have a significant effect on their final grain structure and macrosegregation. Numerical modeling of the associated physics is challenging since complex and strong interactions between heat and mass transfer at the microscopic and macroscopic scales must be taken into account. The paper presents a finite element multi-scale solidification model coupling nucleation, growth, and solute diffusion at the microscopic scale, represented by a single unique grain, while also including transport of the liquid and solid phases at the macroscopic scale of the ingots. The numerical resolution is based on a splitting method which sequentially describes the evolution and interaction of quantities into a transport and a growth stage. This splitting method reduces the non-linear complexity of the set of equations and is, for the first time, implemented using the finite element method. This is possible due to the introduction of an artificial diffusion in all conservation equations solved by the finite element method. Simulations with and without grain transport are compared to demonstrate the impact of solid phase transport on the solidification process as well as the formation of macrosegregation in a binary alloy (Sn-5 wt pct Pb). The model is also applied to the solidification of the binary alloy Fe-0.36 wt pct C in a domain representative of a 3.3-ton steel ingot.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Modeling the effect of natural convection on macrosegregation of steel ingot by using a novel method

Xiuhong Kang,Dianzhong Li,Tiao Lu,Pingwen Zhang,Yiyi Li

2003-01-01

Abstract:A program is developed to simultaneously solve macroscopic mass, momentum, energy, and species conservation equations during solidification based on a volume-averaged model. The program is applied to a binary Fe-C steel ingot to examine the effect of natural convection on the heat, melt flow and solute transfer and further to predict the macrosegregation quantitatively. Unidirectional heat transfer boundary conditions are assumed. The numerical results show that convection dramatically alters the shape of isotherms and the distribution of solute concentration. The linear equations are solved using Bi-conjugate Gradient Stabilized (BI-CGSTAB) and multi-grid (MGM) iterative methods, which greatly improve the computing efficiency. The predicted results using novel algorithm are compared with those using conventional method and they are more accurate. These robust algorithms are available to simulate real castings with high accuracy and rapid speed.
Resummation in Hot Field Theories

Jens O. Andersen,M. Strickland

DOI: https://doi.org/10.1016/j.aop.2004.09.017

2004-08-17

Abstract:There has been significant progress in our understanding of finite-temperature field theory over the past decade. In this paper, we review the progress in perturbative thermal field theory focusing on thermodynamic quantities. We first discuss the breakdown of naive perturbation theory at finite temperature and the need for an effective expansion that resums an infinite class of diagrams in the perturbative expansion. This effective expansion which is due to Braaten and Pisarski, can be used to systematically calculate various static and dynamical quantities as a weak-coupling expansion in powers of g. However, it turns that the weak-coupling expansion for thermodynamic quantities are useless unless the coupling constant is very small. We critically discuss various ways of reorganizing the perturbative series for thermal field theories in order to improve its convergence. These include screened perturbation theory (SPT), hard-thermal-loop perturbation theory (HTLPT), the Phi-derivable approach, dimensionally reduced (DR) SPT, and the DR Phi-derivable approach.

High Energy Physics - Phenomenology

Weak Reproductive Solutions for a Convection-Diffusion Model Describing a Binary Alloy Solidification Processes

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

On the existence of solutions for a drift-diffusion system arising in corrosion modelling

Comparative Analysis of Isothermal and Non-Isothermal Solidification of Binary Alloys Using Phase-Field Model

Diffusion across the interface and equilibrium and growth of phases in alloys

A Monte-Carlo Approach to Cellular-Pattern Evolution for Binary-Alloys During Directional Solidification

Modeling of microsegregation in macrosegregation computations

A New Coupled Model for Alloy Solidification

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

A Response to Numerical Benchmark for Solidification of Binary Alloys: Macro-Segregation with Thermo-Solutal Convection

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

A Numerical Method for Sharp-Interface Simulations of Multicomponent Alloy Solidification

Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Solving Free Boundary Problems in Alloy Solidification under Universal Cooling Conditions

Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

Modelling Of The Thermosolutal Convection And Macrosegregation In The Solidification Of An Fe-C Binary Alloy

Incorporating density jumps and species-conserving dynamics in XPFC binary alloys

Finite Element Multi-scale Modeling of Chemical Segregation in Steel Solidification Taking into Account the Transport of Equiaxed Grains

Modeling the effect of natural convection on macrosegregation of steel ingot by using a novel method

Resummation in Hot Field Theories