Permittivity Estimation in Ray-tracing Using Path Loss Data based on GAMP

Yuanhao Jiang,Shidong Zhou,Xiaofeng Zhong

2024-02-14

Abstract:In this paper, we propose a modified Generalized Approximate Message Passing (GAMP) algorithm to estimate permittivity parameters using path loss data in ray-tracing model.

Signal Processing

What problem does this paper attempt to address?

Efficient Method for Scattering from Cylindrical Components of Vegetation and Its Potential Application to the Determination of Effective Permittivity

Dejun Li,Chao Yang,Yang Du

DOI: https://doi.org/10.1109/tgrs.2017.2720849

IF: 8.2

2017-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Reliable and efficient analysis of electromagnetic scattering by cylindrical components of vegetation is important for microwave remote sensing of vegetated terrain. It allows for the characterization of anistropicity of the effective permittivity for vegetation or tree canopy, where averaging operation over distribution of cylinder orientation is needed in general. In this paper, we propose a T-matrix formulation based on our virtual partition method (VPM) for the whole cylindric component of either homogeneous or inhomogeneous nature. Numerical simulations demonstrate that the proposed T-matrix preserves all the desirable features of the VPM method, including high fidelity prediction of the scattering amplitude function and fulfillment of energy conservation as well as the reciprocity theorem. More importantly, in the evaluation of averaging over orientation distribution, the proposed method is usually faster than the VPM by two orders of magnitude. The predicted effective permittivity for an exemplary orientation distribution shows appreciable difference from that of the infinite cylinder approximation. With its qualitatively characterized region of validity, the proposed method is expected to be helpful in multiband coherent scattering models of vegetated terrain.
A Calibrated Permittivity Modeling Approach for Cross-Area Path Loss Prediction

Yuanhao Jiang,Shidong Zhou,Xiaofeng Zhong

DOI: https://doi.org/10.1109/lwc.2022.3232380

IF: 6.3

2023-01-01

IEEE Wireless Communications Letters

Abstract:Accurate path loss prediction (PLP) in target areas (TAs) is required in many wireless communication applications. However, in real-world deployment, there only may be available path loss data outside TAs. In this letter, a framework based on calibrating the modeling of buildings' permittivity for cross-area PLP is proposed, with the advantage of not requiring data from TAs. The proposed framework requires only the Reference Signal Received Power (RSRP) data from other measured areas (MAs, no intersection with TAs), to learn more precise permittivity modeling and indirectly enhance the prediction in TAs. Furthermore, we exploit a message-passing based algorithm and its low-complexity implementation in the optimization of calibrating permittivity modeling, to improve the prediction accuracy and reduce the iterations required. Real-world measurement is performed and the results have revealed a better performance improvement of the proposed method, compared with Random Forest (RF) and ray-tracing (RT).
MIXTURE EFFECTIVE PERMITTIVITY SIMULATIONS USING IMLMQRF METHOD ON PRECONDITIONED EFIE

H. G. Wang,C. H. Chan,L. Tsang,K. F. Chan

DOI: https://doi.org/10.2528/pier05072603

2006-01-01

Abstract:Effective permittivity of mixtures of lossy dielectric are important quantities to be studied in microwave remote sensing of soil moisture, sea ice, dry and wet snow, in geophysical probing of properties of porous rocks and in composite materials. In this paper, these quantities are studied with large-scale numerical solutions of Maxwell equations in the electroquasistatic limit using fast electromagnetic algorithms. The preconditioned EFIE method instead of scalar potential scattering method for the simulation of the relative permittivity of the mixture with conducting particles in quasi-static environment is introduced. Furthermore, Algorithm IMLMQRF, which is kernel independent for quasi-static problems with a complexity of O(N log N), is implemented to accelerate the matrix-vector multiply when CG iteration is applying on this preconditioned EFIE system. Subsequently, numerical examples, viz., the permittivity extractions from two lattice structures and one random distribution structure with the unknowns from about 1,000 to 50,000 are efficiently simulated by our method in this paper. The numerical results demonstrate the efficiency of this hybrid method.
A Real-Time Permittivity Estimation Method for Stepped-Frequency Ground-Penetrating Radar by Full-Waveform Inversion.

Xu Li,Shengbo Ye,Qingyang Kong,Chenyang Song,Xiaojun Liu,Guangyou Fang

DOI: https://doi.org/10.3390/rs15215188

IF: 5

2023-01-01

Remote Sensing

Abstract:Ground-penetrating radar (GPR) has been widely used in estimating the permittivity of mediums. The radar echo amplitude method is an important method used by GPR in this estimation, the basic step of which is to deduce the magnitude of the permittivity according to the relationship between the reflection coefficient and the permittivity. Based on the basic principle of the radar echo amplitude method, this paper proposes a full-wave inversion real-time permittivity estimation method that can be used for stepped-frequency GPR (SFGPR), which offers high efficiency, accuracy, and generalization ability. The characteristics of this method are mainly reflected in the following four aspects: Using the SFGPR system and introducing a layered media detection model, we can complete waveform compensation optimization with high precision. The distance between the antenna and the surface of the reflective medium is extracted from the time domain waveform without manual measurement, avoiding human measurement errors. The inversion of the total reflection waveform at the required height works under the principle of an electromagnetic field, eliminating the need for repeated metal plate calibration experiments and improving work efficiency and waveform accuracy. In a continuous measurement line, the total reflection waveform inversion on each measurement point can be efficiently completed, and the change of permittivity on the measurement line can be obtained. To evaluate the feasibility of the proposed method, we performed experiments on a wall of known thickness, and the permittivity estimation was basically consistent with that of the dielectric probe, physical model calculation, and wall penetration. We also successfully applied this method to the dielectric property analysis of adobe samples. The results indicate that the proposed method can help grasp the condition of a measured medium, which can ensure the accuracy of detection and improve subsequent data processing efficiency.
A Machine Learning Based Channel Parameter Prediction Method Utilizing Ray Tracing Simulation Dataset

Kai-Ning Wang,Han-Zhi Ma,Da Li,Hang-Guan Shan,Er-Ping Li

DOI: https://doi.org/10.23919/ACES-China60289.2023.10250078

2023-01-01

Abstract:Accurate channel models are essential to the evaluation and optimization deployment of mobile communication systems, especially with the development of next generation of mobile communication, which has raised the accuracy demand for channel modeling. This paper proposes a path loss prediction method based on spatial propagation environment characteristics with a combined application of convolutional neural network and deep neural network. Especially, the latest empirical path loss model is added in the proposed method as prior information for predicting path loss. The accuracy and efficiency of the proposed path loss prediction model are verified in this work with its application to ray tracing simulation examples that combine different propagation environment characteristics, transmitter (Tx) and receiver (Rx) coordinates, Tx-Rx distances, and the potential of this method for channel prediction in different urban communication scenarios is demonstrated.
A Novel 3d Ray-Tracing Acceleration Technique Based On Kd-Tree Algorithm For Radio Propagation Predictionin Complex Indoor Environment

Xiaowei Mei,Yong Zhang,Hai Lin

2014-01-01

Abstract:This paper presents a new 3D ray tracing acceleration technique based on the kd-tree algorithm for predicting the radio coverage in complex indoor environment. For each ray emitted from the transmitter, all the valid ray propagation paths can be searched for by the hybrid ray tracing model which combines the shooting and bouncing ray (SBR) and the image method. The kd-tree algorithm is mainly used to accelerate the intersection test of ray tracing. In addition, the receiver power strength can be calculated based on geometrical optics (GO) and uniform theory of diffraction (UTD). As expected, the proposed method performs higher superiority than the conventional ray tracing model in terms of computational efficiency. Meanwhile, it also shows good agreement with measurements and the Winprop's simulated results with respect to computational accuracy.
Beam Tracing with Physical Optics for Angular Glint Calculation in Near Field

Yifan Wu,Yuxuan Li,Yuhao Shen,Lizhen Yang,Nan Wu,Hai Lin

DOI: https://doi.org/10.1109/piers62282.2024.10618174

2024-01-01

Abstract:Angular glint is an important factor affecting radar measurement accuracy, which comes from the interaction of multiple scattering centers of the extended target and cannot be eliminated. In the near-field region, angular glint exerts a more significant impact on radar tracking accuracy, and may even cause radar pointing to fall beyond the actual target extent. There are two methods for calculating angular glint, the Poynting vector method (PVM) and the phase gradient method (PGM), of which PVM is commonly used for theoretical calculations and PGM is often used for practical measurements. In this paper, the angular glint is calculated by PVM using the scattered field of the target. Therefore, optimizing the computational efficiency of the near-field scattered field is of utmost significance. While Geometrical Optics (GO) and Physical Optics (PO) are commonly used methods for high-frequency electromagnetic scattering calculations, GO can only calculate the scattered field in the specular direction, and PO is not applicable to scenarios involving multiple reflections. Therefore, this paper proposes a physical optics method based on beam tracing, which can not only calculate the scattered field in any direction but also solve the problem of multiple reflections. Furthermore, the PO method requires the initial subdivision of the target into small facets. The size of these facets is dependent on the frequency, and the number of facets for the target substantially increases as the frequency rises, thereby affecting computational efficiency. In the proposed method in this paper, the target can be composed of large-size facets, allowing for the rapid computation of the near-field scattering field, and higher computational efficiency can be obtained by introducing space acceleration structure and parallel computing techniques.
Estimation of Fading Coefficients in the Presence of Multipath Propagation

Yufeng Zhang,Zhongfu Ye,Chao Liu

DOI: https://doi.org/10.1109/tap.2009.2021973

IF: 5.7

2009-01-01

IEEE Transactions on Antennas and Propagation

Abstract:In order to get the information about multipath propagation, this communication presents two estimation methods for slowly varying fading coefficients. With known numbers of the far-field sources and multipaths from each far-field source, the fading coefficients in multipath propagation can be well estimated. The methods not only have low complexity but also have high performance, and the fading coefficients can be resolved directly without a searching procedure. Afterwards, we make an extension to further improve the estimation accuracy of both direction of arrival (DOA) and fading coefficients after obtaining their estimations. The Cramer-Rao bound (CRB) for this problem is also deduced. Simulation results demonstrate the effectiveness and efficiency of the proposed methods.
Physics-Informed Neural Networks for Path Loss Estimation by Solving Electromagnetic Integral Equations

Fenyu Jiang,Tong Li,Xingzai Lv,Hua Rui,Depeng Jin

DOI: https://doi.org/10.1109/twc.2024.3429196

2024-01-01

Abstract:Accurately and efficiently modeling wireless channels, especially estimating path loss value, is crucial to wireless system design and performance optimization. This paper proposes a knowledge and data jointly driven path loss estimation method named PEFNet. PEFNet can predict the total electric field based on its mathematical relationship with the incident field by introducing the Volume Integration Equation into the loss function and scenario environmental information as input. Then, we let PEFNet learn in a supervised manner to compensate for residual error against measured data for refinement. We conduct extensive experiments on two publicly available path loss datasets, RadioMapSeer and RSRPSet, to exhibit the superiority of PEFNet over other state-of-the-art baselines. By comparing overall estimation performance, carrying out ablation study, testing estimation efficiency, and evaluating generalization ability, the results prove that PEFNet is an accurate and efficient method for estimating path loss.
An Efficient Ray Tracing Based Method of Ground Penetrating Radar Simulation for Dispersive Media

Junfa Zhang,Yesheng Gao,Xingzhao Liu,Zhicheng Wang,Yu Cui

DOI: https://doi.org/10.1109/igarss47720.2021.9553264

2021-01-01

Abstract:Ground Penetrating Radar (GPR) is a non-destructive technique that employs electromagnetic waves to map subsurface structures. An effective simulation method is essential for GPR system design and signal processing. In this paper, a simulation method of GPR is proposed for dispersive media that is usually encountered in GPR applications. The behavior of dispersive media is simulated in our method by filtering the transmitted signal of GPR with an approximation of the system transfer function that is obtained by interpolating the values of the system transfer function evaluated at different frequencies, each of which is acquired by simulating GPR using the existing ray tracing based method of GPR simulation for non-dispersive media with a mono-frequency signal of the corresponding frequency as its transmitted signal. The accuracy and efficiency of our method were validated by comparing the experimental results of our method to those of the Frequency-Dependent Finite-Difference Time-Domain (FD-FDTD) method. The experimental results demonstrate that our method can simulate GPR for dispersive media with acceptable accuracy consuming much less running time than the FD-FDTD method for GPR simulation for dispersive media.
An Efficient and Accurate OpenMP-MPI Based 3D Beam Tracing Method for Radio Propagation Simulation in Large Scale Urban Environments

Xiaowei Mei,Yong Zhang,Hai Lin,Pengcheng Gao

DOI: https://doi.org/10.1080/09205071.2017.1409136

2017-01-01

Journal of Electromagnetic Waves and Applications

Abstract:A modified adaptive division beam tracing (MADBT) technique based on the localized kd-tree and the OpenMP-MPI parallel techniques is presented for the simulation of radio propagation in large-scale urban environments. Beams launched from a transmitter are recursively traced by applying the MADBT method and beam trees recorded the propagation path info are generated. By traversing the beam trees, all the valid propagation (transmitted, reflected and diffracted) paths are efficiently determined. Then the receiver power strength can be calculated based on geometrical optics (GO) and uniform theory of diffraction along the arrival paths. By tracing the continuous beams instead of a number of rays, the proposed method performs higher efficiency than the widely used ray tracing method. During the beam tracing procedure, several techniques are adopted to accelerate the calculation. Firstly, a localized kd-tree is built according to the coverage area of the transmitter, which is more efficient than the global kd-tree to do the beam-triangle intersection during the tracing procedure. Secondly, a virtual simulation face is generated to speed up the searching for ray paths. Lastly, the OpenMP and the MPI parallel technique are implemented to further enhance efficiency of the proposed method. As expected, the simulated results for the realistic Malaysia urban environment show good agreement with measured results and performance high efficiency.
Retrieving Material Permittivity Under Oblique Incidence

Yingchao Xie,Qingyang Meng,Kuiwen Xu,Lixin Ran,Jun Wang

DOI: https://doi.org/10.1109/COMPEM.2019.8779016

2019-01-01

Abstract:Noncontact measurement of complex permittivity at microwave frequencies is significantly important in various areas of scientific research and engineering applications. The noncontact solution based on nonlinear inversions proposed before are usually set up in 2D scenario. While in experiments, it is hard to restrict the wave vector of incident wave in the horizon plane. In this work, we theoretically and numerically investigate the performance of the subspace-based optimization method (SOM) for two-dimensional objects when considering an oblique incidence, of which the wave vector deviates from the horizon plane. Analytical and simulation results showed that the theoretical model can effectively estimate the deviation introduced by oblique incidence.
A new progressive radiosity algorithm through the use of accurate form-factors

Mingfu Wang,Hujun Bao,Qunsheng Peng

DOI: https://doi.org/10.1016/0097-8493(92)90008-J

IF: 1.821

1992-01-01

Computers & Graphics

Abstract:A new formula for accurately evaluating form-factors based on the analytic solution is presented. Each receiving patch is divided into three parts, namely the totally lit area, the umbra area, and the approximative penumbra area, according to its relative position to the source patch. The precise form-factor from the source patch to any sample point in the totally lit area is calculated and a corresponding amount of light energy is transferred. The totally lit area is divided further into subpatches if the difference of radiosity at its vertices exceeds a given threshold. For a sample point in the approximative penumbra area, the exact area on the source patch that can be seen from the sample point is determined by projecting the in-between surface patches onto the source patch. The exact amount of light energy transferred from the source to this sample point can then be estimated. The requirement for a better interpolation scheme for rendering is highlighted.
A Practical Path Guiding Method for Participating Media

Hong Deng,Beibei Wang,Rui Wang,Nicolas Holzschuch

DOI: https://doi.org/10.1007/s41095-020-0160-1

IF: 4.1268

2020-01-01

Computational Visual Media

Abstract:Rendering translucent materials is costly:light transport algorithms need to simulate a large number of scattering events inside the material before reaching convergence. The cost is especially high for materials with a large albedo or a small mean-freepath, where higher-order scattering effects dominate.In simple terms, the paths get lost in the medium.Path guiding has been proposed for surface rendering to make convergence faster by guiding the sampling process. In this paper, we introduce a path guiding solution for translucent materials. We learn an adaptive approximate representation of the radiance distribution in the volume and use it to sample the scattering direction, combining it with phase function sampling by resampled importance sampling. The proposed method significantly improves the performance of light transport simulation in participating media, especially for small lights and media with refractive boundaries.Our method can handle any homogeneous participating medium, with high or low scattering, with high or low absorption, and from isotropic to highly anisotropic.
AMPLE: An Adaptive Multiple Path Loss Exponent Radio Propagation Model Considering Environmental Factors

Lingyou Zhou,Jie Zhang,Jiliang Zhang,Oktay Cetinkaya,Steve Jubb

2023-08-21

Abstract:We present AMPLE -- a novel multiple path loss exponent (PLE) radio propagation model that can adapt to different environmental factors. The proposed model aims at accurately predicting path loss with low computational complexity considering environmental factors. In the proposed model, the scenario under consideration is classified into regions from a raster map, and each type of region is assigned with a PLE. The path loss is then computed based on a direct path between the transmitter (Tx) and receiver (Rx), which records the intersected regions and the weighted region path loss. To regress the model, the parameters, including PLEs, are extracted via measurement and the region map. We also verify the model in a suburban area. To the best of our knowledge, this is the first time that a multi-slope model precisely maps PLEs and region types. Besides, this model can be integrated into map systems by creating a new path loss attribute for digital maps.

Networking and Internet Architecture,Signal Processing
Estimation of Near-Surface Attenuation Using Inversion of Rayleigh Waves with Fundamental and Higher Modes

Wei Zhao,Zhenyu Zhu,Zhipeng Liu,Yangyang He,Jinghuai Gao

DOI: https://doi.org/10.1190/segam2013-0329.1

2013-01-01

Abstract:Wave energy attenuation in near surface is an important physics issue for many applications. Various estimation methods have been developed for measuring Q from Rayleigh waves; however, the conventional methods are based on the assumption of layered earth model. In this paper we proposed a method to estimate near-surface Q from Rayleigh waves with fundamental and higher modes. This method can deal with complex media which are not layered. The simulated annealing algorithm is used and a new objective function is given. The velocities and densities of near-surface materials are assumed to be provided, Rayleigh waves are modeled by finite difference method; then based on the dispersion properties of Rayleigh waves, Rayleigh-wave mode separation is performed. The objective function is calculated using the amplitude information of fundamental- and higher-mode Rayleigh waves. The numerical tests show that our method can obtain accurate Q in complex media.
Simple, Fast, and Accurate Broadband Complex Permittivity Characterization Algorithm: Methodology and Experimental Validation from 140 GHz Up to 220 GHz

Xiue Bao,Li Wang,Zeyu Wang,Jiabei Zhang,Meng Zhang,Giovanni Crupi,Anxue Zhang

DOI: https://doi.org/10.3390/electronics11030366

IF: 2.9

2022-01-01

Electronics

Abstract:Accurate permittivity characterization has attracted a lot of attention in various areas. Resonant characterization methods are well-known for their accuracy, but they are restricted in very narrow frequency ranges, and thus, they are normally not recommended to be used for dispersive or high-loss materials. Transmission line characterization techniques are outstanding for being inexpensive, accurate, and broadband, but the algorithms are often complex to perform. This paper proposes a fast, simple, and accurate broadband permittivity characterization algorithm, which is mainly suitable for millimeter-wave applications. It combines a general line–line method and a closed-form algorithm, extracting the complex permittivity of the material under test (MUT) without the need for calculating any intermediate parameters. Validation measurements on de-ionized water in the frequency range from 140 to 220 GHz are in very good agreement with the literature data, which successfully indicates that the proposed algorithm is reliable and accurate for millimeter wave permittivity characterization.
26GHz ray-tracing pathloss prediction in outdoor scenario in presence of vegetation

F. Mani,E.M. Vitucci,M. Barbiroli,F. Fuschini,V. degli Esposti,Mingming Gan,Chao Li,Jianyao Zhao,Zhimeng Zhong

DOI: https://doi.org/10.1049/cp.2018.0384

2018-01-01

Abstract:In this paper 26GHz propagation in outdoor urban environment is investigated using path-loss measurements and ray-tracing simulation. The impact of advanced implementations such as diffuse scattering and vegetation attenuation is verified versus measurements in an outdoor scenario. The results show that the contribution from non-specular components in non-line-of-sight conditions is much more important than expected to achieve a good prediction accuracy at this frequency band. Moreover, vegetation attenuation is also very relevant and can be modeled using a simple, specific attenuation formula. Despite some deficiencies in the input database, the prediction accuracy is good and simulations are generally able to track the measurements behavior.
Progressive and Approximate Techniques in Ray-Tracing-Based Radio Wave Propagation Prediction Models

ZQ Chen,HL Bertoni,A Delis

DOI: https://doi.org/10.1109/tap.2003.822446

IF: 5.7

2004-01-01

IEEE Transactions on Antennas and Propagation

Abstract:Progressive and approximate techniques are proposed here for ray-tracing systems used to predict radio propagation. In a progressive prediction system, intermediate prediction results are fed back to users continuously. As more raypaths are processed, the accuracy of prediction results improves progressively. We consider how to construct a progressive system that satisfies the requirements of continuous observability and controllability as well as faithfulness and fairness. Adding a workload estimator to such a progressive prediction system allows termination of the computation when a desired accuracy (mean and standard deviation of the error) is achieved without knowing the final result that would be obtained if the prediction system runs to completion. The sample generator is at the core of the progressive prediction system and serves to cluster and prioritize raypaths according to their expected contributions to prediction results. Two types of progressive approaches, source-group-raypath-permute and raypath-interleave, are proposed. The workload estimator determines the number of raypaths to be processed to achieve the specified requirement on prediction accuracy. Two approximate models are described that adjust the workload dynamically during the prediction process. Our experiments show that the proposed progressive and approximate methods provide flexible mechanisms to trade prediction accuracy for prediction time in a relatively fine granularity.
2D CPITD Method for Extracting Attenuation Constant of Longitudinally Invariant Lossy Transmission Lines

Zhen Kang,Xikui Ma,Xu Zhuansun

DOI: https://doi.org/10.1049/el.2014.1535

2014-01-01

Electronics Letters

Abstract:Owing to the fact that the conventional compact two-dimensional (2D) precise integration time-domain (CPITD) method ignores the attenuation along the propagation direction for lossy invariant transmission lines, the calculation results are unsatisfactory. To extract the exact attenuation constant, a novel CPITD method that considers the attenuation constant along the propagation direction and describes an iterative process to seek out the attenuation constant is proposed. Compared with previous research related to the compact 2D finite-difference time-domain (CFDTD) method, the analytical or approximate analytical solution of the attenuation constant as the initial input value is used followed by the golden division method to find the interval of the exact attenuation constant in the iterative process. Numerical experimentations validate that the results of the novel method are much more accurate than those of the conventional CPITD method. Furthermore, the proposed method is of higher computational efficiency than the CFDTD method.

Permittivity Estimation in Ray-tracing Using Path Loss Data based on GAMP

Efficient Method for Scattering from Cylindrical Components of Vegetation and Its Potential Application to the Determination of Effective Permittivity

A Calibrated Permittivity Modeling Approach for Cross-Area Path Loss Prediction

MIXTURE EFFECTIVE PERMITTIVITY SIMULATIONS USING IMLMQRF METHOD ON PRECONDITIONED EFIE

A Real-Time Permittivity Estimation Method for Stepped-Frequency Ground-Penetrating Radar by Full-Waveform Inversion.

A Machine Learning Based Channel Parameter Prediction Method Utilizing Ray Tracing Simulation Dataset

A Novel 3d Ray-Tracing Acceleration Technique Based On Kd-Tree Algorithm For Radio Propagation Predictionin Complex Indoor Environment

Beam Tracing with Physical Optics for Angular Glint Calculation in Near Field

Estimation of Fading Coefficients in the Presence of Multipath Propagation

Physics-Informed Neural Networks for Path Loss Estimation by Solving Electromagnetic Integral Equations

An Efficient Ray Tracing Based Method of Ground Penetrating Radar Simulation for Dispersive Media

An Efficient and Accurate OpenMP-MPI Based 3D Beam Tracing Method for Radio Propagation Simulation in Large Scale Urban Environments

Retrieving Material Permittivity Under Oblique Incidence

A new progressive radiosity algorithm through the use of accurate form-factors

A Practical Path Guiding Method for Participating Media

AMPLE: An Adaptive Multiple Path Loss Exponent Radio Propagation Model Considering Environmental Factors

Estimation of Near-Surface Attenuation Using Inversion of Rayleigh Waves with Fundamental and Higher Modes

Simple, Fast, and Accurate Broadband Complex Permittivity Characterization Algorithm: Methodology and Experimental Validation from 140 GHz Up to 220 GHz

26GHz ray-tracing pathloss prediction in outdoor scenario in presence of vegetation

Progressive and Approximate Techniques in Ray-Tracing-Based Radio Wave Propagation Prediction Models

2D CPITD Method for Extracting Attenuation Constant of Longitudinally Invariant Lossy Transmission Lines