Abstract:Capabilities of long-range flight and vertical take-off and landing (VTOL) are essential for Urban Air Mobility (UAM). Tiltrotor VTOLs have the advantage of balancing control simplicity and system complexity due to their redundant control authority. Prior work on controlling these aircraft either requires separate controllers and switching modes for different vehicle configurations or performs the control allocation on separate actuator sets, which cannot fully use the potential of the redundancy of tiltrotor. This paper introduces a unified MPC-based control strategy for a customized tiltrotor VTOL Unmanned Aerial Vehicle (UAV), which does not require mode-switching and can perform the control allocation in a consistent way. The incorporation of four independently controllable rotors in VTOL design offers an extra level of redundancy, allowing the VTOL to accommodate actuator failures. The result shows that our approach outperforms PID controllers while maintaining unified control. It allows the VTOL to perform smooth acceleration/deceleration, and precise coordinated turns. In addition, the independently controlled tilts enable the vehicle to handle actuator failures, ensuring that the aircraft remains operational even in the event of a servo or motor malfunction.

What problem does this paper attempt to address?

The main problems that this paper attempts to solve are the unity and efficiency of control strategies during the conversion process of different flight modes for tilt - rotor vertical take - off and landing (VTOL) unmanned aerial vehicles (UAVs). Specifically: 1. **Unified control strategy**: Existing control methods usually need to design independent controllers for different flight configurations or stages (such as multi - rotor mode, fixed - wing mode) and switch between these modes. This mode switching not only increases the complexity of the system but also may lead to a decline in control performance. This paper proposes a unified control strategy based on model predictive control (MPC), which can achieve unified control of the entire flight process without mode switching. 2. **Redundancy utilization**: Tilt - rotor VTOL UAVs have multiple independently controllable actuators, which provide redundancy for the system. However, existing control methods often cannot fully utilize this redundancy. This paper improves the overall efficiency and performance of the system by optimizing the control allocation of the entire actuator set. 3. **Fault tolerance**: Since tilt - rotor VTOL UAVs have multiple independently controllable rotors, when some actuators fail, other actuators can compensate for the functions of the failed actuators to ensure that the UAV can still operate normally. The design in this paper takes into account the situation of actuator failures to ensure that the UAV can still maintain stable flight when some actuators are ineffective. 4. **Smooth transition**: Between different flight modes (such as the transition from multi - rotor mode to fixed - wing mode), the UAV needs to go through a complex transition stage. The method in this paper enables the UAV to accelerate / decelerate smoothly and make precise coordinated turns during these transition stages, thereby improving the smoothness and stability of flight. Through the above methods, this paper aims to provide a more efficient, more reliable, and more flexible control strategy for tilt - rotor VTOL UAVs to meet the needs of applications such as urban air mobility (UAM).

A Unified MPC Strategy for a Tilt-rotor VTOL UAV Towards Seamless Mode Transitioning

MPC Flight Control for a Tilt-Rotor VTOL Aircraft

A constrained robust switching MPC structure for tilt-rotor UAV trajectory tracking problem

Modeling and control of a class of urban air mobility tiltrotor aircraft

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

A Hierarchical Control Approach for a Quadrotor Tail-Sitter VTOL UAV and Experimental Verification

Nonlinear Model Predictive Control of Tiltrotor Quadrotors with Feasible Control Allocation

Development of Multimode Flight Transition Strategy for Tilt-Rotor VTOL UAVs

Control and Flight Test of A Tilt-Rotor Unmanned Aerial Vehicle

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

A Unified Control Method for Quadrotor Tail-Sitter UAVs in All Flight Modes: Hover, Transition, and Level Flight

Unified incremental nonlinear controller for the transition control of a hybrid dual-axis tilting rotor quad-plane

Development of Model Predictive Controller for a Tail-Sitter VTOL UAV in Hover Flight

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Redundant manipulation control strategy for unmanned tilt-rotor aircraft

Multiple Modeling and Fuzzy Switching Control of Fixed-Wing VTOL Tilt-Rotor UAV

Nonlinear Control of a Single Tail Tilt Servomotor Tri-Rotor Ducted VTOL-UAV

Full Attitude Control of an Efficient Quadrotor Tail-sitter VTOL UAV with Flexible Modes

A new control scheme for an aerodynamic-surface-free tilt-rotor convertible UAV

Unified Accurate Attitude Control for Dual-Tiltrotor UAV with Cyclic Pitch Using Actuator Dynamics Compensated LADRC

Multi-Level Switching Control Scheme for Folding Wing VTOL UAV Based on Dynamic Allocation