Abstract:Tunable couplers in superconducting quantum computers have enabled fast and accurate two-qubit gates, with reported high fidelities over 99% in various architectures and gate implementation schemes. However, there are few tunable couplers whose performance in multi-qubit systems is clarified, except for the most widely used one: single-transmon coupler (STC). Achieving similar accuracy to isolated two-qubit systems remains challenging due to various undesirable couplings but is necessary for scalability. In this work, we numerically analyze a system of three fixed-frequency qubits coupled via two double-transmon couplers (DTCs) where nearest-neighbor qubits are highly detuned and also next nearest-neighbor ones are nearly resonant. The DTC is a recently proposed tunable coupler, which consists of two fixed-frequency transmons coupled through a common loop with an additional Josephson junction. We find that the DTC can not only reduce undesired residual couplings sufficiently, as well as in isolated two-qubits systems, but also enables implementations of 30-ns CZ gates and individual and simultaneous 10-ns $\pi/2$ pulses with fidelities over 99.99%. For comparison, we also investigate the system where the DTCs are replaced by the STCs. The results show that the DTC outperforms the STC in terms of both residual coupling suppression and gate accuracy in the above systems. From these results, we expect that the DTC architecture is promising for realizing high-performance, scalable superconducting quantum computers.

What problem does this paper attempt to address?

This paper attempts to address the problem of achieving high-performance, scalable superconducting quantum computers in multi-qubit systems. Specifically, the focus of the research is on the performance of double transmon couplers (DTC) in multi-qubit systems, particularly in terms of reducing unnecessary residual coupling and achieving high-fidelity quantum gate operations. ### Background Issues 1. **Existing Challenges**: - In superconducting quantum computers, tunable couplers have significantly improved the performance of two-qubit gates, achieving over 99% fidelity. - However, for multi-qubit systems, especially those with highly detuned qubits, existing single transmon couplers (STC) face difficulties in reducing residual coupling. - This residual coupling can lead to increased errors in multi-qubit systems, thereby affecting the scalability of the system. ### Research Objectives 1. **Performance Analysis**: - Through numerical analysis, study the performance of two DTCs in a three-qubit system, particularly their effectiveness in reducing unnecessary residual coupling (such as ZZ coupling and ZZZ coupling). - Verify whether DTCs can achieve high-fidelity gate operations in multi-qubit systems comparable to those in isolated two-qubit systems (e.g., 30-nanosecond CZ gate and 10-nanosecond π/2 pulse). 2. **Comparative Study**: - Compare the DTC system with systems using STC to evaluate the superiority of DTC in multi-qubit systems. ### Main Findings 1. **Residual Coupling Suppression**: - DTCs can significantly reduce residual coupling between neighboring qubits (NN) and next-nearest-neighbor qubits (NNN) to about 1 kHz. - In contrast, STCs find it challenging to achieve similar residual coupling suppression in multi-qubit systems. 2. **High-Fidelity Gate Operations**: - A three-qubit system using DTCs can achieve 30-nanosecond CZ gates and 10-nanosecond π/2 pulses with an average fidelity exceeding 99.99%. - These results indicate that DTCs not only perform well in isolated two-qubit systems but also exhibit excellent performance in multi-qubit systems. ### Conclusion - This study demonstrates that the DTC architecture has significant advantages in multi-qubit systems, particularly in reducing unnecessary residual coupling and achieving high-fidelity gate operations. - These results provide important theoretical and technical support for the realization of high-performance, scalable superconducting quantum computers.

High-performance multiqubit system with double-transmon couplers: Toward scalable superconducting quantum computers

High-performance multiqubit system with double-transmon couplers: Toward scalable superconducting quantum computers

Tunable Coupling Scheme for Implementing High-Fidelity Two-Qubit Gates

High-performance superconducting two-qubit gate using a three-mode tunable coupler

Realization of High-Fidelity CZ Gate based on a Double-Transmon Coupler

A tunable coupling scheme for implementing high-fidelity two-qubit gates

A tunable coupler for suppressing adjacent superconducting qubit coupling

Modular superconducting-qubit architecture with a multichip tunable coupler

Tunable Coupler for Realizing a Controlled-Phase Gate with Dynamically Decoupled Regime in a Superconducting Circuit

Tunable coupler to fully decouple and maximally localize superconducting qubits

Modular Superconducting Qubit Architecture with a Multi-chip Tunable Coupler

Tunable Capacitor For Superconducting Qubits Using an InAs/InGaAs Heterostructure

Fast Tunable Coupler for Superconducting Qubits

New Design of three-qubit system with three transmons and a single fixed-frequency resonator coupler

Realization of two-qubit gates and multi-body entanglement states in an asymmetric superconducting circuits

Quantum computing with many superconducting qubits

Realization of high-fidelity CZ gates in extensible superconducting qubits design with a tunable coupler

High-Fidelity, High-Scalability Two-Qubit Gate Scheme for Superconducting Qubits

Tunable Coupling Architectures with Capacitively Connecting Pads for Large-Scale Superconducting Multi-Qubit Processors

Characterization of Tunable Coupler Without a Dedicated Readout Resonator in Superconducting Circuits

Realization of High-Fidelity Controlled-Phase Gates in Extensible Superconducting Qubits Design with a Tunable Coupler