Abstract:Monitoring and managing the powerline corridors are essential in the electricity demand of our daily activities and productions. UAV-LiDAR is being used as a feasible technique for such tasks to reduce the amount of manual inspection of the powerline corridors. However, challenges in extracting powerlines using a large point cloud remain due to the various scenarios and unavoidable noise. In this work, a novel procedure to segment wires individually from bundle conductors automatically using the point cloud acquired by the UAV system is proposed. The scene is first voxelized, and the voxel-based heigh features are generated and utilized to rough detect the locations of the objects. The powerline span is determined using the adjacent pylons, and the corresponding powerlines are extracted. The powerlines are segmented to different bundle conductors using the connected-component analysis in one powerline span. Finally, the slicing procedure is implemented along the powerline span direction, and CFDP (clustering by fast search and find density peaks) algorithm is introduced to segment the individual wires from the entire bundle conductors. To solve the failure results caused by various density, the parameters used in the CFDP algorithm is optimized. This procedure was validated by comparing powerlines extracted manually using the CloudCompare software. For the uniform density bundle conductors, the quantitative assessment in terms of precision, recall, and F1-score are 98.17%, 96.60%, and 97.37%, respectively. The corresponding values for the nonuniform density bundle conductors are 95.25%, 88.03%, and 90.95%, respectively. Results of the proposed method are compared to k-means, DBSCAN, and spectral clustering, demonstrating the superiority of the effectiveness.

Automatic extraction and 3D reconstruction of split wire from point cloud data based on improved DPC algorithm

Automated Recognition and Measurement Based on Three-Dimensional Point Clouds to Connect Precast Concrete Components

Separation of Line Drawings Based on Split Faces for 3D Object Reconstruction

Research on Point Cloud Power Line Segmentation and Fitting Algorithm

A Novel Method to Segment Individual Wire from Bundle Conductor Using UAV-LiDAR Point Cloud Data

Research on Point Cloud Repair Based on Multi-parameter Extraction in Digital Power Plant

Surface Extraction and Boundary Detection Based on DBSCAN Clustering in 3D Point Clouds

An 3D Point Cloud Reconstruction Approach from Single Image for Smart Power Plant

Outdoor Scene 3D Reconstruction from Multiple Point Cloud

3D Reconstruction Approach for Outdoor Scene Based on Multiple Point Cloud Fusion

Edge-based Segmentation of Point Cloud Data

3D Object Segmentation Using Cross-Window Point Transformer with Latent Semantic Boundary Guidance

PC2WF: 3D Wireframe Reconstruction from Raw Point Clouds

Research on High Voltage Power Line extraction based on Transmission Line Point Cloud characteristics and Model fitting

Learning to Construct 3D Building Wireframes from 3D Line Clouds

Study of Base Segmenting Algorithm of Substation Equipment Based on 3D Point Cloud

A Gap-Based Method for LiDAR Point Cloud Division

Point cloud contour extraction method based on improved pass-through dimensionality reduction

A novel system for off-line 3D seam extraction and path planning based on point cloud segmentation for arc welding robot

A Method of D-Type Weld Seam Extraction Based on Point Clouds

Extraction of Feature Information from Point Cloud of Large Volume Steel Truss Members