Abstract:Changes in the seafloor relief are particularly noticeable in shallow waterbodies (at depths up to several metres), where they are of significance for human safety and environmental protection, as well as for which the highest measurement accuracy is required. The aim of this publication is to present the integration data model of the bathymetric monitoring system for shallow waterbodies using Unmanned Aerial Vehicles (UAV) and Unmanned Surface Vehicles (USV). As part of this model, three technology components will be created: a hydroacoustic and optoelectronic data integration component proposed by Dąbrowski et al., a radiometric depth determination component based on optoelectronic data using the Support Vector Regression (SVR) method, and a coastline extraction component proposed by Xu et al. Thanks to them, it will be possible to cover the entire area with measurements in the coastal zone, in particular between the shallow waterbody coastline and the min. isobath recorded by the echo sounder (the area is lacking actual measurement data). Multisensor data fusion obtained using Global Navigation Satellite System (GNSS)/Inertial Navigation System (INS), Light Detection And Ranging (LiDAR), Real Time Kinematic (RTK), UAV, and USV will allow to meet the requirements provided for the International Hydrographic Organization (IHO) Special Order (horizontal position error ≤ 2 m (p = 0.95), vertical position error ≤ 0.25 m (p = 0.95)). To this end, bathymetric and photogrammetric measurements shall be carried out under appropriate conditions. The water transparency in the tested waterbody should be at least 2 m. Hydrographic surveys shall be performed in windless weather and the water level is 0 in the Douglas sea scale (no waves or sea currents). However, the mission with the use of an UAV should take place in appropriate meteorological conditions, i.e., no precipitation, windless weather (wind speed not exceeding 6–7 m/s), sunny day.

Recovering the 3D UUV Position using UAV Imagery in Shallow-Water Environments

A Low Cost Visual Positioning System for Small Scale Tracking Experiments on Underwater Vehicles

An Underwater Positioning System for UUVs Based on LiDAR Camera and Inertial Measurement Unit

Computer Vision-Based Position Estimation for an Autonomous Underwater Vehicle

Integration Data Model of the Bathymetric Monitoring System for Shallow Waterbodies Using UAV and USV Platforms

A Search Strategy and Vessel Detection in Maritime Environment Using Fixed-Wing UAVs

Positioning of Unmanned Underwater Vehicle Based on Autonomous Tracking Buoy

SHALLOW WATER BATHYMETRY MAPPING FROM UAV IMAGERY BASED ON MACHINE LEARNING

Real-time Underwater 3D Reconstruction Based on Monocular Image

Analysis of Methods for Determining Shallow Waterbody Depths Based on Images Taken by Unmanned Aerial Vehicles

3-D Shape Recovery of Planar and Curved Surfaces from Shading Cues in Underwater Images

A Low Cost UWB Based Solution for Direct Georeferencing UAV Photogrammetry

A Sonar-based AUV Positioning System for Underwater Environments with Low Infrastructure Density

REAL-TIME POSITIONING AND TRACKING FOR VISION-BASED UNMANNED UNDERWATER VEHICLES

Enhancing Georeferencing and Mosaicking Techniques over Water Surfaces with High-Resolution Unmanned Aerial Vehicle (UAV) Imagery

Design, Integration and Sea Trials of 3D Printed Unmanned Aerial Vehicle and Unmanned Surface Vehicle for Cooperative Missions

A Survey on Visual Navigation and Positioning for Autonomous UUVs

Long-Range Vision-Based UAV-assisted Localization for Unmanned Surface Vehicles

Towards UAV-USV Collaboration in Harsh Maritime Conditions Including Large Waves

REAL-TIME 3D RECONSTRUCTION FROM IMAGES TAKEN FROM AN UAV