Abstract:The reactor coolant pump is a key equipment in a nuclear power plant. If the leakage exceeds a certain threshold, it may cause reactor overheating and shutdown. The reactor coolant pump leakage fault usually has two problems: corrosion and scaling. Accurately and efficiently diagnosing the leakage fault mode as early as possible and predicting its remaining useful life (RUL) are important for taking timely maintenance measures. In this paper, an integrated method is proposed. First, the cross-sectional area of the first seal is extracted as a fault indicator. The motivation is that corrosion may enlarge the cross-sectional area, and scaling may reduce the cross-sectional area. Based on the fluid mechanics theory, an integrated model with several uncertain parameters is established among the cross-sectional area, temperature, and leakage at the inlet and outlet of the first seal. In the diagnosing process, a modified change-detection method is proposed to detect the starting point of degradation. Then, the unknown parameters in the previous relation are estimated, and the degrading data before the starting point of degradation are used to diagnose the leakage fault mode. Second, a time-series model of the autoregressive integrated moving average (ARIMA) is established to predict the remaining useful life based on the degrading data after the starting point of degradation. Finally, the leakage degrading data from six reactor coolant pumps of a nuclear power plant is used to perform the leakage fault mode diagnosis and life prediction with degradation point detection error rates not exceeding 4%, fault mode diagnosis correction rates 100% and practical RUL predicting results, which proves that the proposed integrated method is accurate and efficient. The proposed integrated method combines the advantages of both the physical model diagnosis and the data-driven model diagnosis and innovatively make use of the quantity of flow from the output side of the primary pump as the monitoring indicator and the cross-sectional area as the characteristic index together to diagnose the leakage fault mode happened to the seal and predict its RUL, which can meet the needs of actual operation and maintenance to ensure a healthy and stable operation of the pump and prevent unexpected shutdowns of nuclear power plants and serious accidents.

Experimental Research on Prediction of Remaining Using Life of Solar DC Centrifugal Pumps Based on ARIMA Model

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

The Remaining Useful Life Prediction Method of a Hydraulic Pump under Unknown Degradation Model with Limited Data

Research on Prediction Method of Gear Pump Remaining Useful Life Based on DCAE and Bi-LSTM

Remaining Useful Life Prediction of Gear Pump Based on Deep Sparse Autoencoders and Multilayer Bidirectional Long–Short–Term Memory Network

Whole flow field performance prediction by impeller parameters of centrifugal pumps using support vector regression

Predicting the Remaining Life of Centrifugal Pump Bearings Using the KPCA–LSTM Algorithm

Probabilistic Modeling and Prediction of Dynamic Discharge Process in Multiphase Pumps

An integrated method for the leakage fault mode diagnosis and life prediction of the reactor coolant pump

Degradation Assessment and Remaining Useful Life Prognostic of Centrifugal Pump Using Multi-Sensor Process Monitoring

Remaining Useful Life Prediction under Multiple Fault Patterns for Degradation Processes with Long-Range Dependence.

Multistage hybrid model for performance prediction of centrifugal pump

Seasonal Heating Performance Prediction of Air-to-water Heat Pumps Based on Short-Term Dynamic Monitoring

RUL Prediction of Lithium Ion Battery Based on ARIMA Time Series Algorithm

Development of a Novel Methodology for Remaining Useful Life Prediction of Industrial Slurry Pumps in the Absence of Run to Failure Data

Remaining Useful Life Prediction Method Based on Multisensor Fusion Under Time-Varying Operating Conditions

Remaining useful life prediction of lithium-ion battery based on fusion model considering capacity regeneration phenomenon

A remaining useful life prediction method based on PSR-former

Two-Stage Hybrid Model for Efficiency Prediction of Centrifugal Pump

Two-Stage Multi-Channel Fault Detection and Remaining Useful Life Prediction Model of Internal Gear Pumps Based on Robust-ResNet

Remaining useful life prediction for complex systems with multiple indicators of stochastic correlation considering random shocks