Abstract:In order to limit the ever-increasing consumption of new resources for material formulations, regulations and legislation require us to move from a linear to a circular economy and to find efficient ways to recycle, reuse and recover materials. Taking into account the principles of material circularity and waste reuse, this research study aims to produce thermoplastic composites using two types of industrial waste from neighbouring companies, namely waste polypropylene (wPP) from household production and carbon-fibre-reinforced epoxy composite scrap from a pultrusion company. The industrial scrap of the carbon-fibre-reinforced epoxy composites was either machined/ground to powder (pCFRC) and used directly as a reinforcement agent or subjected to a chemical digestion process to recover the carbon fibres (rCFs). Both pCFRC and rCF, at different weight ratios, were melt-blended with wPP. Prior to melt blending, both pCFRC and rCF were analysed for morphology by scanning electron microscopy (SEM). The pCFRC powder contains epoxy resin fragments with spherical to ellipsoidal shape and carbon fibre fragments. The rCFs are clean from the matrix, but they are slightly thicker and corrugated after the matrix digestion. Further, the morphologies of wPP/pCFRC and wPP/rCF were also investigated by SEM, while the thermal behaviour, i.e., transitions and changes in crystallinity, and thermal resistance were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The strength of the interaction between the filler (i.e., pCFRC or rCF) and the wPP matrix and the processability of these composites were assessed by rheological studies. Finally, the mechanical properties of the systems were characterised by tensile tests, and as found, both pCFRC and rCF exert reinforcement effects, although better results were obtained using rCF. The wPP/pCFRC results are more heterogeneous than those of the wPP/rCF due to the presence of epoxy and carbon fibre fragments, and this heterogeneity could be considered responsible for the mechanical behaviour. Further, the presence of both pCFRC and rCF leads to a restriction of polymer chain mobility, which leads to an overall reduction in ductility. All the results obtained suggest that both pCFRC and rCF are good candidates as reinforcing fillers for wPP and that these complex systems could potentially be processed by injection or compression moulding.

Valorization of waste Ti6Al4V chips for epoxy composite production: A circular economy approach

Novel Application of Mechanochemistry in Waste Epoxy Recycling via Solid-State Shear Milling

Recycling of titanium as reinforcement in cast aluminium alloy A356 for improving the microstructural refinement and mechanical performance towards a sustainable material development

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Recovery of Pressed Titanium Alloy Machining Chip via Vacuum Induction Melting

Upcycling polyester fleece fabric waste into sustainable composites using glass microsphere modified epoxy matrix: performance investigation

Novel Thermoplastic Composites Strengthened with Carbon Fiber-Reinforced Epoxy Composite Waste Rods: Development and Characterization

Design of Cost Effective Epoxy + Scrap Rubber Based Composites Reinforced with Titanium Dioxide and Alumina Fibers

Vacuum-oxygen-low recycling process of aluminium composites manufactured from steel machining chips

Solvent-free Rapid Degradation of Epoxy Composites and Recycling Application of High Performance Carbon Fibers Through the Synergic Catalysis Effect of Molten Salts and Titanium Dioxide

Recycling of Aluminum-Based Composites Reinforced with Boron-Tungsten Fibres

REUSING MANUFACTURING WASTES AS CRACK RETARDANT

Thermochemical recycling of epoxy resin composites reinforced with carbon fiber

Carbon-Fiber-Recycling Strategies: A Secondary Waste Stream Used for PA6,6 Thermoplastic Composite Applications

Mechanical recycling of CFRPs based on thermoplastic acrylic resin with the addition of carbon nanotubes

Mechanochemical Recycling of Highly Cross‐Linked Thermosets: Economic‐Friendly and Pollution‐Free

Recycling of waste wind turbine blades for high‐performance polypropylene composites

Sustainable Recovery of Titanium Alloy: From Waste to Feedstock for Additive Manufacturing

Exploring the potential of waste carbon fiber reinforced epoxy for high‐performance electromagnetic interference shielding

Mechanical, fracture, and environmental performance of greener polymer composites containing low to high micro fillers with recycled and byproduct origins