Abstract:To further enhance the crashworthiness of subway vehicle anti-climb energy-absorbing devices, this paper proposes a novel collapsible structure, which is embedded with honeycomb aluminum blocks and consists of an inner and outer double-layer square tube. An impact finite element model of the subway vehicle’s anti-climb energy-absorbing device was established using LS-DYNA (v.17.2). The effects of the connecting diaphragm thickness, the inner and outer tube thicknesses of the thin-walled tubes, and the yield strength of the honeycomb aluminum on the energy absorption and impact force of the anti-climb energy-absorbing device were investigated. The results indicate that changes in the inner and outer tube thicknesses of the thin-walled tubes significantly affect the energy absorption and impact force of the anti-climb energy-absorbing device. However, changes in the connecting diaphragm thickness only increase the maximum energy absorption by up to 7.5% but have a significant impact on the maximum peak force. It was also found that the difference in energy absorption due to changes in the yield strength of the honeycomb aluminum is only 3.6%, suggesting that the yield strength of the honeycomb aluminum and the connecting diaphragm thickness have a limited influence on the crashworthiness design of the anti-climb energy-absorbing device. Furthermore, a multi-objective surrogate model characterizing the specific energy absorption and maximum peak force was established for the aforementioned four influential parameters using the response surface method. The model was then optimized using a genetic algorithm, resulting in optimal parameters that increased the energy absorption and specific energy absorption by 27.3% and 13.8%, respectively, compared to the original values, leading to a significant improvement in crashworthiness. The findings provide valuable references for and insights into the crashworthiness design and optimization of subway vehicles’ anti-climb energy-absorbing devices.

Design of energy-absorbing bionic workstation table for trains and research on occupant collision injury

Dynamic simulation of train driver under secondary impact

Multiple-Criteria Evaluation of Thin-Walled Energy-Absorbing Structures of Train Under Fuzzy Environment: Modeling and Algorithm

Railway occupant passive safety improvement by optimal design

Pelvis and thoracolumbar spine response in simulated under-body blast impacts and protective seat cushion design

Concept design of an active headrest for neck injury mitigation of rear impact

On the use of hybrid shock absorbers to increase safety of commercial aircraft passengers during a crash event

Surface Material Effects on Fall-Induced Paediatric Head Injuries: a Combined Approach of Testing, Modelling and Optimisation

Impact Attenuator Design for Improvement of Racing Car Drivers' Safety

Advanced FE Modeling of Vehicle Interior Structures to Enhance the Prediction for Crash Induced Injury Risk of the Occupant

Energy Absorption Characteristics and Parameter Optimization of Anti-Climb Energy-Absorbing Devices for Subway Vehicles under Impact Loads

Design and numerical study on bionic columns with grooves under lateral impact

Simulation Study of Effect of Seat Design Parameters on Occupant Neck Injury Potential in Low-Speed Rear Impact

A Study On Injury Of Pedestrian Leg & Knee During Impaction To Bumper

Numerical and experimental investigations on the behaviour of the sandwiched tube-type airbag

An analytical model to predict back face deformation of hybrid soft body armors under ballistic impact

Investigation of tissue injuries for rear-row children occupants during frontal crash

The Safety of Body Structure and Occupant Protection Research of Medium Bus Under Three Kinds of Frontal Impact Forms

Investigation on the dynamic characteristic of occupant during the frontal collision between high-speed train and obstacle

Influencing factors investigation of passenger head injury in subway collisions

Investigation of Risk Factors Affecting Injuries in Reclining Seat under Frontal Impact