Abstract:Transceivers that function under a high-speed rate (over 200 Gb/s) need to have more optical power ability to overcome the power losses which is a reason for using a larger RF line connected to a Mach-Zehnder modulator for obtaining high data bitrate communication. One option to solve this problem is to use a complex laser with a power of over 100 milliwatts. However, this option can be complicated for a photonic chip circuit due to the high cost and nonlinear effects, which can increase the system noise. Therefore, we propose a better solution to increase the power level using a 4 × 1 power combiner which is based on multimode interference (MMI) using a silicon nitride (Si3N4) slot waveguide structure. The combiner was solved using the full-vectorial beam propagation method (FV-BPM), and the key parameters were analyzed using Matlab script codes. Results show that the combiner can function well over the O-band spectrum with high combiner efficiency of at least 98.2% after a short light coupling propagation of 28.78 μm. This new study shows how it is possible to obtain a transverse electric mode solution for four Gaussian coherent sources using Si3N4 slot waveguide technology. Furthermore, the back reflection (BR) was solved using a finite difference time-domain method, and the result shows a low BR of 40.15 dB. This new technology can be utilized for combining multiple coherent sources that work with a photonic chip at the O-band range.

Multi-stage coherent beam combination of semiconductor optical amplifiers in ready-made fiber couplers

Coherent Combining of Two Pulsed Solid State Lasers

Time-division multiplexing cascaded active phase-locking method for an all-fiber coherent beam combining system

Target-in-the-loop coherent beam combining based on an all-fiber structure

Simultaneous All‐optical Amplification, Inversion and Format Conversion Based on Self‐induced Nonlinear Effects in a Semiconductor Optical Amplifier

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

All-fiber photonic lantern multimode optical receiver with coherent adaptive optics beam combining

Scalable structure of coherent polarization beam combining based on tapered diode laser amplifiers

All-optical Wavelength Multicasting Based on Cascaded Four-Wave Mixing with a Single Pump in Highly Nonlinear Fibers

Coherent beam combining of two all-PM thulium-doped fiber chirped pulse amplifiers

Coherent WDM Systems Using in-Line Semiconductor Optical Amplifiers

81-Beam Coherent Combination Using a Programmable Array Generator.

Multi-dimensional wavefront manipulation of phased fiber laser array for coherent beam combining in finite-distance conformal transmission

Efficient fiber coupling system for simultaneous beam shaping and wavelength combining based on misaligned stepped prism multiplexing

Active coherent beam combining and beam steering using a spatial mode multiplexer

Combining Four Gaussian Lasers Using Silicon Nitride MMI Slot Waveguide Structure

Multi-Wavelength Fiber Ring Laser with Semiconductor Optical Amplifier

Optical Phase Conjugation Conversion through a Nonlinear Bidirectional Semiconductor Optical Amplifier Configuration

Coherent beam combining of femtosecond third-harmonic generators: towards high-power, high-beam-quality UV light generation

Demonstration of a multiwave coherent holographic beam combiner in a polymeric substrate

High power orbital-angular-momentum beam generation system based on coherent beam array combination technique