Sperm function and its manipulation for microassisted fertilization.

S. Fleming,S. Green,Jenny Hall,S. Fishel

DOI: https://doi.org/10.1016/S0950-3552(05)80023-9

1994-03-01

Abstract:

What problem does this paper attempt to address?

Preparation and characterization of nano-hydroxyapatite/silk fibroin porous scaffolds.

Lin Liu,Jinying Liu,Mingqi Wang,Sijia Min,Yurong Cai,Liangjun Zhu,Juming Yao

DOI: https://doi.org/10.1163/156856208783721010

2008-01-01

Abstract:Novel tissue engineering scaffold materials of nano-hydroxyapatite (nHA)/silk fibroin (SF) biocomposite were prepared by freeze-drying. The needle-like nHA crystals of about 10 nm in diameter by 50-80 nm in length, which were uniformly distributed in the porous nHA/SF scaffolds, were prepared by a co-precipitation method with a size. The as-prepared nHA/SF scaffolds showed good homogeneity, interconnected pores and high porosity. XRD and FT-IR analysis suggested that the silk fibroin was in beta-sheet structure, which usually provides outstanding mechanical properties for silk materials. In this work, composite scaffolds containing as high as 70% (w/w) nHA were prepared, which had excellent compressive modulus and strength, higher than the scaffolds at low nHA content level and other porous biodegradable polymeric scaffolds often considered in bone-related tissue engineering reported previously. The cell compatibility of composite scaffolds was evaluated through cell viability by MTT assay. All these results indicated that these nHA/SF scaffold materials may be a promising biomaterial for bone tissue engineering.
Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications

haiping zhang,xiaotian liu,mingying yang,liangjun zhu

DOI: https://doi.org/10.1016/j.msec.2015.05.052

2015-01-01

Abstract:To mimic the natural fibrous structure of the tissue extracellular matrix, a nano-fibrous silk fibroin (SF)/sodium alginate (SA) composite scaffold was fabricated by a thermally-induced phase-separation method. The effects of SF/SA ratio on the structure and the porosity of the composite scaffolds were examined. Scanning electron microscopy and porosity results showed that the 5SF/1SA and 3SF/1SA scaffolds possessed an excellent nano-fibrous structure and a porosity of more than 90%. Fourier transform infrared, X-ray diffraction, and differential scanning calorimetry results indicated the physical interaction between SF and SA molecules and their good compatibility in the 5SF/1SA and 3SF/1SA scaffolds, whereas they showed less compatibility in the 1SF/1SA scaffold. Cell culture results showed that MG-63 cells can attach and grow well on the surface of the SF/SA scaffolds. The nano-fibrous SF/SA scaffold can be potentially used in tissue engineering.
Fabrication and Biological Application of Nano-Hydroxyapatite (nha)/alginate (alg) Hydrogel As Scaffolds

Mingchun Du,Weixing Song,Yue Cui,Yang,Junbai Li

DOI: https://doi.org/10.1039/c0jm02869j

2011-01-01

Journal of Materials Chemistry

Abstract:We have fabricated tubular hydrogel scaffolds of nano-hydroxyapatite (nHA)/alginate (ALG) via a layer-by-layer (LbL) technique. Using Ca2+ as a crosslinker, nHA was assembled with ALG to form a hydrogel network. The inner diameter of scaffolds could be controlled from 0.5 mm to 7 mm by varying the assembled layer numbers of nHA/ALG pairs. By changing the nHA concentration, we can also control the crosslinking degree of the hydrogel network, and further change the mechanical properties, swelling behavior, permeability and diffusivity of the scaffolds. The elastic modulus of the hydrogel scaffolds was regulated from 0.98 +/- 0.05 MPa to 2.78 +/- 0.08 MPa as the concentration of nHA was changed from 50 mg mL(-1) to 300 mg mL(-1), which reached the requirements of avascular soft tissue. The diffusion coefficient was tuned from 23.84 x 10(-7) cm(2) s(-1) to 9.92 x 10(-7) cm(2) s(-1) for controlled mass transport in the hydrogel network. Moreover, human embryo skin fibroblast (ESF) culture experiments prove that nHA can improve cellular adhesion on the hydrogel surface. These results thus suggest that the assembled nHA/ALG hydrogel scaffolds are an attractive biomaterial for great potential application in soft tissue engineering.
A novel and homogeneous scaffold material: preparation and evaluation of alginate/bacterial cellulose nanocrystals/collagen composite hydrogel for tissue engineering

Huiqiong Yan,Denggao Huang,Xiuqiong Chen,Haifang Liu,Yuhong Feng,Zhendong Zhao,Zihao Dai,Xueqin Zhang,Qiang Lin

DOI: https://doi.org/10.1007/s00289-017-2077-0

IF: 2.843

2017-05-24

Polymer Bulletin

Abstract:Alginate is a well-known biomaterial which has been widely used in tissue engineering due to its excellent property. However, there are still several drawbacks, such as weak mechanical strength, the lack of cell recognition sites for cell adhesion, extensive swelling and uncontrolled degradation that limit its practical application. Therefore, the internal gelation using CaCO3–GDL complex and the incorporation of bacterial cellulose nanocrystals (BCNs) and type I collagen (COL) as the reinforcing component into alginate matrix were proposed to prepare the novel and homogeneous alginate/bacterial cellulose nanocrystals/collagen composite scaffold (ALG/BCNs/COL). The morphology, porosity, mechanical property, swelling and degradation behavior, and cytotoxicity of the resultant scaffold were investigated. The experimental results showed that ALG/BCNs/COL revealed good three-dimensional (3D) architecture as well as lamellar and porous morphologies. The incorporation of BCNs into alginate matrix obviously decreased the pore size and maintained the porosity of ALG/BCNs/COL, which was in favour of mechanical integrity. FT-IR spectra and XRD analysis revealed that the components of ALG/BCNs/COL, such as SA, BCNs and COL were combined together by intermolecular hydrogen bonds, which could effectively inhibit large swelling and retard the biodegradation of the composite scaffold. Finally, cell studies results indicated that both MC3T3-E1 and h-AMS cells were viable and proliferate well on the composite scaffold.

polymer science
Fabrication of alginate/sericin/cellulose nanocrystals interpenetrating network composite hydrogels with enhanced physicochemical properties and biological activity

Ting Wu,Haiying Liu,Hongcai Wang,Yanan Bu,Jiayi Liu,Xiuqiong Chen,Huiqiong Yan,Qiang Lin

DOI: https://doi.org/10.1002/app.55052

IF: 3

2023-12-18

Journal of Applied Polymer Science

Abstract:Sodium alginate (SA) possesses good biocompatibility and can form hydrogel materials under certain conditions, which has been widely used in tissue engineering. However, the absence of cellular recognition sites and low mechanical strength for single‐component alginate (ALG) hydrogels limit their practical applications. Therefore, enhancing the shortcomings of ALG hydrogels and augmenting their characteristics hold immense importance for their medical uses. In this study, comprehensively considering the excellent properties of cellulose nanocrystals (CNCs) and sericin (SS), the alginate/sericin/cellulose nanocrystalline (ALG/SS/CNCS) composite hydrogels were constructed by interpenetrating network (IPN) technique using hydroxyapatite/D‐glucono‐δ‐lactone (HAP/GDL) as the endogenous ionic cross‐linking agent of SA, 1‐ethyl‐(3‐dimethylaminopropyl) carbodiimide hydrochloride/N‐hydroxysuccinimide (EDC/NHS) as the chemical covalent cross‐linking agent of SS and CNCS as the reinforcing agent. The effects of SS and CNCs additions on the comprehensive properties of ALG/SS/CNCs composite hydrogels, such as their morphologies, structure, mechanical properties, swelling, degradability, and cytocompatibility were investigated. The findings indicated that the ALG/SS/CNCS IPN composite hydrogels which were created through the physical blending of SA and SS, displayed a consistent three‐dimensional form and a porous configuration. The weak mechanical strength of pure ALG hydrogels can be effectively improved and the swelling stability and mechanical properties of the composite hydrogels can be enhanced through the construction of IPN network and the incorporation of CNCs, thanks to the presence of intermolecular hydrogen bonding. The biodegradability of ALG/SS/CNCS composite hydrogels increased as the SS content increased, indicating that SS facilitated their biomineralization due to its inherent susceptibility to degradation. The results of the cell compatibility test conducted in a laboratory setting showed that SS and CNCS had the ability to enhance the attachment, proliferation, and differentiation of MC3T3‐E1 cells on the ALG/SS/CNCS composite hydrogels. Hence, incorporating SS and CNCS into the alginate matrix to create IPN composite hydrogels could significantly enhance the physicochemical and biological characteristics of ALG hydrogels, thus rendering them appropriate for tissue engineering purposes.

polymer science
Construction and Evaluation of Alginate Dialdehyde Grafted RGD Derivatives/Polyvinyl Alcohol/Cellulose Nanocrystals IPN Composite Hydrogels

Hongcai Wang,Ruhong Yin,Xiuqiong Chen,Ting Wu,Yanan Bu,Huiqiong Yan,Qiang Lin

DOI: https://doi.org/10.3390/molecules28186692

IF: 4.6

2023-09-20

Molecules

Abstract:To enhance the mechanical strength and cell adhesion of alginate hydrogel, making it satisfy the requirements of an ideal tissue engineering scaffold, the grafting of Arg-Gly-Asp (RGD) polypeptide sequence onto the alginate molecular chain was conducted by oxidation of sodium periodate and subsequent reduction amination of 2-methylpyridine borane complex (2-PBC) to synthesize alginate dialdehyde grafted RGD derivatives (ADA-RGD) with good cellular affinity. The interpenetrating network (IPN) composite hydrogels of alginate/polyvinyl alcohol/cellulose nanocrystals (ALG/PVA/CNCs) were fabricated through a physical mixture of ion cross-linking of sodium alginate (SA) with hydroxyapatite/D-glucono-δ-lactone (HAP/GDL), and physical cross-linking of polyvinyl alcohol (PVA) by a freezing/thawing method, using cellulose nanocrystals (CNCs) as the reinforcement agent. The effects of the addition of CNCs and different contents of PVA on the morphology, thermal stability, mechanical properties, swelling, biodegradability, and cell compatibility of the IPN composite hydrogels were investigated, and the effect of RGD grafting on the biological properties of the IPN composite hydrogels was also studied. The resultant IPN ALG/PVA/CNCs composite hydrogels exhibited good pore structure and regular 3D morphology, whose pore size and porosity could be regulated by adjusting PVA content and the addition of CNCs. By increasing the PVA content, the number of physical cross-linking points in PVA increased, resulting in greater stress support for the IPN composite hydrogels of ALG/PVA/CNCs and consequently improving their mechanical characteristics. The creation of the IPN ALG/PVA/CNCs composite hydrogels' physical cross-linking network through intramolecular or intermolecular hydrogen bonding led to improved thermal resistance and reduced swelling and biodegradation rate. Conversely, the ADA-RGD/PVA/CNCs IPN composite hydrogels exhibited a quicker degradation rate, attributed to the elimination of ADA-RGD by alkali. The results of the in vitro cytocompatibility showed that ALG/0.5PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels showed better proliferative activity in comparison with other composite hydrogels, while ALG/PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels displayed obvious proliferation effects, indicating that PVA, CNCs, and ADA-RGD with good biocompatibility were conducive to cell proliferation and differentiation for the IPN composite hydrogels.

chemistry, multidisciplinary,biochemistry & molecular biology
Chemical characterization and biological properties of titania/hydroxyapatite-promoted biomimetic alginate-chitosan-gelatin composite hydrogels

Xiuqiong Chen,Hongcai Wang,Xiuying Sun,Yanan Bu,Huiqiong Yan,Qiang Lin

DOI: https://doi.org/10.1016/j.ceramint.2023.05.120

IF: 5.532

2023-05-01

Ceramics International

Abstract:Ceramic nanoparticles, hydroxyapatite (HAP) and titania (TiO2) nanoparticles were commonly used as the reinforcing agent for biological materials due to their high chemical stability, low toxicity, outstanding biocompatibility and good bioactivity, which will be beneficial to enhance the physical, chemical and biological properties of composite hydrogels. To fundamentally improve the bio-applicability of alginate hydrogels, we attempted to fabricate titania/hydroxyapatite-promoted biomimetic alginate-chitosan-gelatin (Alg/TiO2/HAP-CS-GT) composite hydrogels by physical blending method using HAP nanoparticles as both the reinforcing agent and the endogenous cross-linking agent, followed by surface modification through alternately electrostatic assembly of chitosan (CS) and gelatin (GT). Meanwhile, the effects of the addition of TiO2 nanoparticles on the pore structure, mechanical properties, swelling, biodegradability, biological mineralization ability and biological activity of Alg/TiO2/HAP-CS-GT composite hydrogels were mainly studied. Experimental results showed that the resultant Alg/TiO2/HAP-CS-GT composite hydrogels exhibited good 3D morphology with the porosity in the range of 86.90%–77.62% and pore size ranging from 210 μm to 90 μm. Moreover, the compressive strength and modulus of Alg/TiO2/HAP-CS-GT composite hydrogels were significantly improved with increasing of TiO2 nanoparticles content and reached up to 0.329 ± 0.012 MPa and 0.558 ± 0.035 MPa, respectively. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and thermogravimetric analyses (TGA) implied that the interfacial interaction between TiO2 nanoparticles and polymer in Alg/TiO2/HAP-CS-GT composite hydrogels was inferred to be the hydrogen bond interaction. Furthermore, the addition of TiO2 nanoparticles could effectively regulate the swelling, in vitro biodegradation and biomineralization, and biological activity of the composite hydrogels. In particular, Alg/TiO2/HAP-CS-GT composite hydrogels could exhibit good cell adhesion and cell proliferation activity. When the addition amount of TiO2 nanoparticles was 1.0% (w/v), Alg/TiO2/HAP-CS-GT composite hydrogels exhibited the highest cell proliferation activity. In addition, with increasing of TiO2 content, the relative alkaline phosphatase (ALP) activity of cells on the Alg/TiO2/HAP-CS-GT composite hydrogels gradually increased, indicating that the addition of TiO2 nanoparticles could also effectively promote cell differentiation. On account of these excellent physical, chemical and biological activities of Alg/TiO2/HAP-CS-GT composite hydrogels, they were expected to be applied in the field of tissue engineering.

materials science, ceramics
Evaluation of 3D Hybrid Alginate/Single Wall Carbon Nanotube Tissue Scaffolds in Terms of Process and Cytocompatibility

eda yildirim,xiaoke yin,frank k ko,selcuk i guceri,w sun

DOI: https://doi.org/10.1109/NEBC.2006.1629724

2006-01-01

Abstract:Three-dimensional hybrid hydrogel tissue scaffolds of calcium alginate/single-walled carbon nanotubes (SWCNTs) composite were fabricated by solid freeform fabrication process in a multi-nozzle biopolymer deposition system. The scaffolds morphological, structural, mechanical and cytocompatibility properties were characterized. Except for a few areas, SWCNTs were evenly dispersed in the fabricated alginate scaffolds, and SWNTs were well aligned on the hydrogel surfaces from the SEM pictures. Raman spectroscopy showed that the structure of the Alginate/SWNT samples had been altered by the nanotube reinforcement. Microtensile test proved the reinforcement effect of SWNT to the mechanical strength of Alginate. Cell culture experiment for Rat Heart Endothelial Cell (RHEC) showed the cytocompatibility and biological enhancement of SWNTs to the Alginate substrate. In this manner, this type of biomaterial and scaffold possesses a good potential for future use in tissue engineering applications.
Fibronectin Functionalization: A Way to Enhance Dynamic Cell Culture on Alginate/Hydroxyapatite Scaffolds

Bianca Zumbo,Benedetta Guagnini,Barbara Medagli,Davide Porrelli,Gianluca Turco

DOI: https://doi.org/10.3390/jfb15080222

2024-08-10

Abstract:Bone defects are a global health concern; bone tissue engineering (BTE) is the most promising alternative to reduce patient morbidity and overcome the inherent drawbacks of autograft and allograft bone. Three-dimensional scaffolds are pivotal in this field due to their potential to provide structural support and mimic the natural bone microenvironment. Following an already published protocol, a 3D porous structure consisting of alginate and hydroxyapatite was prepared after a gelation step and a freezing-drying step. Despite the frequent use of alginate in tissue regeneration, the biological inertness of this polysaccharide hampers proper cell colonization and proliferation. Therefore, the purpose of this work was to enhance the biological properties by promoting the interaction and adhesion between cells and biomaterial with the use of Fibronectin. This extracellular matrix protein was physically adsorbed on the scaffold, and its presence was evaluated with environmental scanning electron microscopy (eSEM) and the Micro-Bicinchoninic Acid (μBCA) protein assay. The MG-63 cell line was used for both static and dynamic (i.e., in bioreactor) 3D cell culturing on the scaffolds. The use of the bioreactor allowed for a better exchange of nutrients and oxygen and a better removal of cell catabolites from the inner portion of the construct, mimicking the physiological environment. The functionalized scaffolds showed an improvement in cell proliferation and colonization compared to non-functionalized ones; the effect of the addition of Fibronectin was more evident in the dynamic culturing conditions, where the cells clearly adhered on the surface of functionalized scaffolds.
Fabrication and evaluation of homogeneous alginate/polyacrylamide–chitosan–gelatin composite hydrogel scaffolds based on the interpenetrating networks for tissue engineering

Xiuqiong Chen,Huiqiong Yan,Chaoling Bao,Qingmei Zhu,Zhaowen Liu,Yanshi Wen,Zhengyue Li,Tong Zhang,Qiang Lin

DOI: https://doi.org/10.1002/pen.25838

2021-10-27

Abstract:Abstract Interpenetrating polymer network (IPN) is generally considered to be one of the most effective methods for imparting high‐strength mechanical properties to hydrogel materials. To broaden the application of alginate hydrogel in skeletal muscle or muscle tissue engineering, the interpenetrating network technology and layer‐by‐layer (LBL) electrostatic assembly were proposed to fabricate the homogeneous alginate/polyacrylamide–chitosan–gelatin (Alg/PAAM–CS–GT) composite hydrogel scaffolds, using the hydroxyapatite/ d ‐glucono‐δ‐lactone (HAP/GDL) complex as the gelling system. The effects of different components of alginate/polyacrylamide (Alg/PAAM) on the morphology, mechanical properties, swelling, degradability, and cytocompatibility of the hydrogel scaffolds were comparatively characterized. Experimental results showed that the as‐prepared Alg/PAAM–CS–GT composite hydrogel scaffolds exhibited sharp edges and regular 3D structures. Their pore structure could be regulated by changing the content of PAAM in Alg/PAAM–CS–GT composite hydrogel scaffolds. And the filling of PAAM reduced the pores and thickened the pore walls, which obviously enhanced the mechanical properties of Alg/PAAM–CS–GT composite hydrogel scaffolds. FT‐IR and thermogravimetric analysis showed that O‧‧‧N hydrogen bonding between COOH of SA and NH 2 of PAAM could be helpful to improve the thermal stability of the composite hydrogel scaffolds. The swelling and biodegradation measurements indicated that the swelling and degradation of Alg/PAAM–CS–GT composite hydrogel scaffolds could be effectively regulated by changing the component content of the composite hydrogel. In addition, the in vitro cytocompatibility analysis showed that the Alg/PAAM–CS–GT composite hydrogel scaffolds could support the growth of MC3T3‐E1 cells and promote cell proliferation and differentiation. According to the in vitro cytocompatibility test results, the optimum PAAM content for the Alg/PAAM–CS–GT composite hydrogel scaffolds was 60%. Because of good morphology, well‐developed pores, excellent mechanical properties, and high biological activity of Alg/PAAM–CS–GT composite hydrogel scaffolds, they could be suitable for application in the tissue engineering field.

engineering, chemical,polymer science
Preparation and characterization of new materials based on silk fibroin, chitosan and nanohydroxyapatite

Alina Sionkowska,Anna Tuwalska

DOI: https://doi.org/10.1080/1023666X.2020.1786271

2020-07-10

International Journal of Polymer Analysis and Characterization

Abstract:In this paper, a series of porous nanohydroxyapatite/silk fibroin/chitosan (nHA/SF/CTS) scaffolds were successfully prepared using the freeze-drying method. The biomaterials were characterized by attenuated total reflection Fourier transform infrared spectroscopy, and mechanical testing and thermogravimetric analysis. Moreover, studies of porosity, pore size, swelling properties and in vitro degradation test were performed. Research has proved that micro-structure, porosity, water adsorption and compressive strength were greatly affected by the components' concentration, in particular the content of silk fibroin. SEM observations showed that the scaffolds of nHA/SF/CTS are highly porous, with pore size in wide range from 25 to 300 μm which is suitable for cell growth. nHA/SF/CTS scaffolds have sufficient mechanical integrity to resist handling during implantation and in vivo loading. Both, the compressive modulus and compressive strength of the scaffold, decrease with the increase in silk fibroin content.
Cognitive, Psychological, and Social Drivers of Longevity

G. Woo

Abstract:As people advance into their 80s, mental health becomes ever more important. Two nonsmoking octogenarians of identical age and gender, with the same body mass index, type of diet and physical exercise routine, may have markedly different prospects of living to 100. Cognitive and social functioning, and positive well-being, are key to living longer. Many activities that influence longevity are very cognitively demanding. For example, chronic illnesses require self-regulation to limit damage; better knowledge and reasoning help manage disease. With physical disease, longitudinal studies undertaken over the past half century have provided the empirical data upon which numerical models have been developed for the prevalence of cancer and cardiovascular disease. To explore the longevity impact of cognitive and social functioning and well-being, longitudinal studies have been undertaken over the past decade in many countries. A notable recent Scottish study has highlighted the widowhood effect: Analysis of mortality statistics of 58,000 married couples found significantly enhanced hazard ratios for both men and women. This paper evaluates the cognitive, psychological and social drivers of longevity by reviewing recent longitudinal studies, and analyzing the latest research on brain plasticity, positive psychology and elderly cohort survival, as well as new geriatric psychological theories on successful aging. A quantitative assessment is then made of the actuarial implications of these drivers for modeling the mortality of elderly annuitants, with new insights into what factors keep people progressing purposefully into advanced age, beyond avoiding disease.
Alginate enriched with phytic acid for hydrogels preparation. Therapeutic applications

Loredana Elena Nita,Aurica P Chiriac,Alina Ghilan,Alina Gabriela Rusu,Daniela Pamfil,Irina Rosca,Liliana Mititelu-Tartau

DOI: https://doi.org/10.1016/j.ijbiomac.2021.08.122

2021-10-31

Abstract:In the last decade, numerous innovative strategies have been used to obtain highly efficient synthetic or semi-synthetic biomaterials. Between these innovative biomaterials, hydrogels occupy a distinct place due to their superior biological and physico-chemical characteristics. Alginate is a natural linear polysaccharide with important physico-chemical and biological properties. Recently, we obtained a new hydrogel based on alginate and phytic acid with improved physico-chemical properties. In the present study, the hydrogels previously obtained were tested in terms of their biological properties and possibilities of use in the biomedical field. For this purpose, the hydrogels were loaded with norfloxacin (NRF), an antibacterial compound utilised in the treatment against Gram-negative and Gram-positive organisms. Unfortunately, NRF has low solubility and permeability. In order to provide protection against loss, but also for enhanced bioavailability, and controlled-release of norfloxacin, a drug inclusion complex with cyclodextrin was realized. The effect of complexation on the release profile was highlighted. The addition of NRF to the hydrogel matrices greatly improved the antibacterial activity of the tested compounds. The presence of CD did not affect the homogeneity of the drug distribution. Changes in the polymeric matrix structure were registered after the incorporation of the drug, which were attributed to the relaxation of the network subsequently to the penetration and diffusion of the drug solution simultaneously with the swelling process. The release of NRF from Alg_PA polymeric network has been successfully modulated by the use of CD as a host molecule.
Development of silk fibroin/nanohydroxyapatite composite hydrogels for bone tissue engineering

Marta Ribeiro,Mariana A. de Moraes,Marisa M. Beppu,Mónica P. Garcia,Maria H. Fernandes,Fernando J. Monteiro,Maria P. Ferraz

DOI: https://doi.org/10.1016/j.eurpolymj.2015.03.056

IF: 6

2015-06-01

European Polymer Journal

Abstract:This work presents a novel composite hydrogel consisting of silk fibroin (SF) and nanohydroxyapatite (nanoHA) prepared by a new and innovative method using ethanol as gelling agent capable of forming hydrogels in few minutes. The properties of the composite material, such as the microstructure as well as the chemical and physical properties were studied. Moreover in␣vitro studies of osteoblastic citocompatibility were performed. The microporosity and macroporosity obtained combined with interconnected porous structure and a uniform dispersion of nanoHA particles throughout the fibroin matrix makes composite hydrogel suitable for bone regeneration. The compression modulus of composite hydrogels was increased as the nanoHA concentration increased from 10 to 15wt.% and the water uptake ability of these materials decreased with the incorporation of nanoHA. The metabolic and alkaline phosphatase activities of osteoblastic cells were improved with the incorporation of nanoHA in the SF matrix providing a more promising material for bone tissue engineering.

polymer science
Development of functionalized multi-walled carbon-nanotube-based alginate hydrogels for enabling biomimetic technologies

Binata Joddar,Eduardo Garcia,Atzimba Casas,Calvin M Stewart

DOI: https://doi.org/10.1038/srep32456

2016-08-31

Abstract:Alginate is a hydrogel commonly used for cell culture by ionically crosslinking in the presence of divalent Ca(2+) ions. However these alginate gels are mechanically unstable, not permitting their use as scaffolds to engineer robust biological bone, breast, cardiac or tumor tissues. This issue can be addressed via encapsulation of multi-walled carbon nanotubes (MWCNT) serving as a reinforcing phase while being dispersed in a continuous phase of alginate. We hypothesized that adding functionalized MWCNT to alginate, would yield composite gels with distinctively different mechanical, physical and biological characteristics in comparison to alginate alone. Resultant MWCNT-alginate gels were porous, and showed significantly less degradation after 14 days compared to alginate alone. In vitro cell-studies showed enhanced HeLa cell adhesion and proliferation on the MWCNT-alginate compared to alginate. The extent of cell proliferation was greater when cultured atop 1 and 3 mg/ml MWCNT-alginate; although all MWCNT-alginates lead to enhanced cell cluster formation compared to alginate alone. Among all the MWCNT-alginates, the 1 mg/ml gels showed significantly greater stiffness compared to all other cases. These results provide an important basis for the development of the MWCNT-alginates as novel substrates for cell culture applications, cell therapy and tissue engineering.
Enhancing alginate dialdehyde-gelatin (ADA-GEL) based hydrogels for biofabrication by addition of phytotherapeutics and mesoporous bioactive glass nanoparticles (MBGNs)

Faina Bider,Chiara Gunnella,Jana T Reh,Corina-Elena Clejanu,Sonja Kuth,Ana M Beltrán,Aldo R Boccaccini

DOI: https://doi.org/10.1177/08853282241280768

2024-09-23

Journal of Biomaterials Applications

Abstract:Journal of Biomaterials Applications, Ahead of Print. This study explores the 3D printing of alginate dialdehyde-gelatin (ADA-GEL) inks incorporating phytotherapeutic agents, such as ferulic acid (FA), and silicate mesoporous bioactive glass nanoparticles (MBGNs) at two different concentrations. 3D scaffolds with bioactive properties suitable for bone tissue engineering (TE) were obtained. The degradation and swelling behaviour of films and 3D printed scaffolds indicated an accelerated trend with increasing MBGN content, while FA appeared to stabilize the samples. Determination of the degree of crosslinking validated the increased stability of hydrogels due to the addition of FA and 0.1% (w/v) MBGNs. The incorporation of MBGNs not only improved the effective moduli and conferred bioactive properties through the formation of hydroxyapatite (HAp) on the surface of ADA-GEL-based samples but also enhanced VEGF-A expression of MC3T3-E1 cells. The beneficial impact of FA and low concentrations of MBGNs in ADA-GEL-based inks for 3D (bio)printing applications was corroborated through various printing experiments, resulting in higher printing resolution, as also confirmed by rheological measurements. Cytocompatibility investigations revealed enhanced MC3T3-E1 cell activity and viability. Furthermore, the presence of mineral phases, as confirmed by an in vitro biomineralization assay, and increased ALP activity after 21 days, attributed to the addition of FA and MBGNs, were demonstrated. Considering the acquired structural and biological properties, along with efficient drug delivery capability, enhanced biological activity, and improved 3D printability, the newly developed inks exhibit promising potential for biofabrication and bone TE.

engineering, biomedical,materials science, biomaterials
Biomimetically Mineralized Alginate Nanocomposite Fibers for Bone Tissue Engineering: Mechanical Properties and in Vitro Cellular Interactions

Taesik Chae,Heejae Yang,Haisle Moon,Tom Troczynski,Frank K Ko

DOI: https://doi.org/10.1021/acsabm.0c00692

2020-10-19

Abstract:We report herein the structural and mechanical properties and in vitro cellular response of hydroxyapatite (HAp)/alginate nanocomposite fibrous scaffolds mimicking the mineralized collagen fibrils of bone tissue. The biomimetically "engineered" nanocomposites, fabricated by electrospinning and in situ synthesis strategy, were compared with pure alginate nanofibers and micrometer-level HAp/alginate composite fibers. The tensile strength and elastic modulus of the nanocomposites increased by 79.3 and 158.4%, respectively, compared to those of alginate. The uniform nucleation and HAp nanocrystal growth on the alginate nanofibers resulted in such enhancement of the mechanical properties via a stress-transfer effect. Rat calvarial osteoblasts were stably attached and stretched more extensively on the nanocomposites' surface than on the pristine alginate. The controlled deposition of the HAp nanophase contributed to a much faster cell proliferation rate on the nanocomposites than on the others. The improved structural stability and osteoblast interactions suggest the fibrous nanocomposite scaffold's potential advantages for bone tissue regeneration.
Design and properties of alginate/gelatin/cellulose nanocrystals interpenetrating polymer network composite hydrogels based on in situ cross-linking

Zhengyue Li,Haiying Liu,Yuqing Liao,Hongcai Wang,Xiuying Sun,Xiuqiong Chen,Huiqiong Yan,Qiang Lin

DOI: https://doi.org/10.1016/j.eurpolymj.2023.112556

IF: 6

2023-11-01

European Polymer Journal

Abstract:Alginate (Alg) hydrogels have attracted extensive attention in the biomedical field due to their biocompatibility. However, single Alg hydrogels exhibit weak mechanical strength, poor stability and cell adhesion, which severely restricts their biomedical application. For this reason, we designed alginate/gelatin/cellulose nanocrystals (Alg/G/CNCs) composite hydrogels by combining interpenetrating network (IPN) technology, cellulose nanocrystals (CNCs) reinforcement and in situ cross-linking method to improve the functional defects of Alg hydrogels. The structure and properties of the resultant Alg/G/CNCs composite hydrogels were comprehensively evaluated by FT-IR, TGA, XRD, swelling and degradability measurements, and cytocompatibility experiments. Alg/G/CNCs composite hydrogels with regular three-dimensional porous network (3D) structures was successfully fabricated through the ionic cross-linking of alginate and the covalent cross-linking of gelatin, followed by the reinforcement of colloidal cellulose nanocrystals (CNCs) that were prepared by sulfuric acid hydrolysis of microcrystalline cellulose (MCC). The addition of CNCs could generate interaction force with the polymer in the IPN matrix, which was able to regulate the physicochemical properties of the composite hydrogel to a certain extent. Moreover, with the increase of gelatin (G) content, the compressive strength of Alg/G/CNCs composite hydrogels gradually increased, while the swelling property decreased gradually. Meanwhile, Alg/G/CNCs composite hydrogels exhibited good cell adhesion, proliferation and differentiation properties. In particular, Alg/0.5G/CNCs composite hydrogels displayed the best cell proliferation effect, while Alg/2G/CNCs composite hydrogels revealedthe most significant cell differentiation effect. Therefore, Alg/G/CNCs composite hydrogels could exhibit good mechanical properties and biocompatibility, which possessed great application potential in the field of tissue engineering.

polymer science
Dual Crosslinked Methacrylated Alginate Hydrogel Micron Fibers and Tissue Constructs for Cell Biology

Yingjun Gao,Xiangyu Jin

DOI: https://doi.org/10.3390/md17100557

2019-09-28

Marine Drugs

Abstract:As an important natural polysaccharide biomaterial from marine organisms, alginate and its derivatives have shown great potential in the fabrication of biomedical materials such as tissue engineering, cell biology, drug delivery, and pharmaceuticals due to their excellent biological activity and controllable physicochemical properties. Ionic crosslinking is the most common method used in the preparation of alginate-based biomaterials, but ionic crosslinked alginate hydrogels are prone to decompose in physiological solution, which hinders their applications in biomedical fields. In this study, dual crosslinked alginate hydrogel microfibers were prepared for the first time. The ionic crosslinked methacrylated alginate (Alg-MA) hydrogel microfibers fabricated by Microfluidic Fabrication (MFF) system were exposed to ultraviolet (UV) light and covalent crosslink between methacrylate groups avoided the fracture of dual crosslinked macromolecular chains in organizational environment. The chemical structures, swelling ratio, mechanical performance, and stability were investigated. Cell-encapsulated dual crosslinked Alg-MA hydrogel microfibers were fabricated to explore the application in tissue engineering for the first time. The hydrogel microfibers provided an excellent 3D distribution and growth conditions for cells. Cell-encapsulated Alg-MA microfibers scaffolds with functional 3D tissue structures were developed which possessed great potential in the production of next-generation scaffolds for tissue engineering and regenerative medicine.

pharmacology & pharmacy,chemistry, medicinal
Composite nano-fibrillated cellulose-alginate hydrogels: Effect of chemical composition on 3D extrusion printing and drug release

Alejandro Hernandez-Sosa,Jorge Mercado-Rico,Elena Usala,Gabriela Cataldi,Adrian Esteban-Arranz,Evis Penott-Chang,Alejandro J. Müller,Zoilo González,Eduardo Espinosa,Rebeca Hernández

DOI: https://doi.org/10.1016/j.polymer.2024.126845

IF: 4.6

2024-04-01

Polymer

Abstract:In this work, composite hydrogels of nanofibrilated cellulose (CNF) and alginate were prepared through direct addition of alginate in powder to a CNF hydrogel. Alginate was hydrophobically modified with C8 alkyl chains (HMAlg), and the effect of chemical modification on the rheological properties and printability of the resulting composite gels was evaluated. The rheological characterization of the composite hydrogels indicated that the addition of alginate, non-modified and HMAlg, did not influence the zero-shear rate viscosity or the mechanical properties of the pristine CNF hydrogels. Printability tests showed that the incorporation of alginate, especially HMAlg, hindered the manufacture of well-defined 3D polymeric structures through 3D extrusion printing. This effect was much more pronounced with the incorporation of bovine serum albumin (BSA) into the gels, which was ascribed to the presence of interactions between the polymer matrix and the BSA. Finally, experiments of BSA release were run with 3D-printed samples, showing that controlled release could be achieved from CNFs gels.

polymer science

Sperm function and its manipulation for microassisted fertilization.

Preparation and characterization of nano-hydroxyapatite/silk fibroin porous scaffolds.

Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications

Fabrication and Biological Application of Nano-Hydroxyapatite (nha)/alginate (alg) Hydrogel As Scaffolds

A novel and homogeneous scaffold material: preparation and evaluation of alginate/bacterial cellulose nanocrystals/collagen composite hydrogel for tissue engineering

Fabrication of alginate/sericin/cellulose nanocrystals interpenetrating network composite hydrogels with enhanced physicochemical properties and biological activity

Construction and Evaluation of Alginate Dialdehyde Grafted RGD Derivatives/Polyvinyl Alcohol/Cellulose Nanocrystals IPN Composite Hydrogels

Chemical characterization and biological properties of titania/hydroxyapatite-promoted biomimetic alginate-chitosan-gelatin composite hydrogels

Evaluation of 3D Hybrid Alginate/Single Wall Carbon Nanotube Tissue Scaffolds in Terms of Process and Cytocompatibility

Fibronectin Functionalization: A Way to Enhance Dynamic Cell Culture on Alginate/Hydroxyapatite Scaffolds

Fabrication and evaluation of homogeneous alginate/polyacrylamide–chitosan–gelatin composite hydrogel scaffolds based on the interpenetrating networks for tissue engineering

Preparation and characterization of new materials based on silk fibroin, chitosan and nanohydroxyapatite

Cognitive, Psychological, and Social Drivers of Longevity

Alginate enriched with phytic acid for hydrogels preparation. Therapeutic applications

Development of silk fibroin/nanohydroxyapatite composite hydrogels for bone tissue engineering

Development of functionalized multi-walled carbon-nanotube-based alginate hydrogels for enabling biomimetic technologies

Enhancing alginate dialdehyde-gelatin (ADA-GEL) based hydrogels for biofabrication by addition of phytotherapeutics and mesoporous bioactive glass nanoparticles (MBGNs)

Biomimetically Mineralized Alginate Nanocomposite Fibers for Bone Tissue Engineering: Mechanical Properties and in Vitro Cellular Interactions

Design and properties of alginate/gelatin/cellulose nanocrystals interpenetrating polymer network composite hydrogels based on in situ cross-linking

Dual Crosslinked Methacrylated Alginate Hydrogel Micron Fibers and Tissue Constructs for Cell Biology

Composite nano-fibrillated cellulose-alginate hydrogels: Effect of chemical composition on 3D extrusion printing and drug release