Abstract:Surface erosion caused by solid particle impact frequently occurs in engineering applications involving particulate flow. With the tremendous progress in computational technology, discrete element method (DEM)-based numerical methods have become a powerful means of studying surface erosion. However, the applicability of applied erosion models remains one of the critical challenges in DEM modelling to obtain satisfactory accuracy over a wide range of materials and impact conditions. In this study, an impact energy erosion model (IEEM) that evaluates erosive wear using accumulated impact energy during the impact process is developed. In IEEM, both cutting and deformation wear are considered. A calibration method of the specific energy that combines DEM simulations and abrasive jet tests is established. To quantitatively predict the erosive wear of the target surface eroded by different particles, an energy allocation rule based on the hardness ratio of the target surface to particles is proposed. Its rationality is thoroughly evaluated before embarking on DEM simulations. Subsequently, the accuracy of DEM simulations incorporated with IEEM and the energy allocation rule is comprehensively verified by comparing them with experimental data on ductile, brittle and semi-brittle materials. The results confirm that DEM simulations can reasonably predict the dependence of erosive wear on impact velocities, impact angles and erodent particle hardness, regardless of the material involved. The calibrated specific energy reflects the properties of the material and further determines the wear mechanism. Finally, the influence of critical DEM parameters on erosion prediction is studied. Generally, DEM incorporated with IEEM and the energy allocation rule provides a quantitative erosion prediction framework applicable to different materials and impact conditions. In the future, this framework has the potential to be applied to the erosion prediction of more systems.

Energy loss caused by the elbow of stiff shotcrete pneumatic conveying based on response surface method and CFD-DEM

An Experimental Study on the Elbow Pressure Drop and Conveying Stability of Pneumatic Conveying for Stiff Shotcrete Based on Response Surface Methodology

Flow characteristics of pneumatic conveying of stiff shotcrete based on CFD-DEM method

Flow characteristics of moist-mixed materials for shotcrete: From experiment to CFD-DEM simulation

Study on flow characteristics of vertical pneumatic conveying of stiff shotcrete materials based on CFD-DEM

Numerical simulation research for the effect of particle shape on the erosion wear in elbow

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Simulation and Experiment on Elbow Wear in Pneumatic Conveying System

Simulation of Two-Phase Flow of Shotcrete in a Bent Pipe Based on a CFD–DEM Coupling Model

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Analysis of gas-solid two-phase flow characteristics of mobile shot blasting machine recovery device based on CFD-DEM

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

Analysis of gas-solid two-phase flow and structure optimization of mobile shot blasting machine recovery device

Study on optimization of shotcrete loading technology and the diffusion law of intermittent dust generation

Investigation of influencing factors of wear in a sandblasting machine by CFD-DEM coupling

The erosion rate prediction for the elbow in shale gas gathering and transportation system: RSM and GA-BP-ANN modeling

DEM Investigation on Conveying of Non-Spherical Particles in a Screw Conveyor

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Development of a DEM Method for Predicting Wear Distribution on Particle Scale

Design optimization of hemispherical protrusion for mitigating elbow erosion via CFD-DPM

CFD-DEM modelling and simulation of pneumatic conveying: A review