Enhancing color saturation in photonic glasses through optimized absorption

Guotao Zhang,Ming Xiao

DOI: https://doi.org/10.1364/oe.516278

IF: 3.8

2024-05-21

Optics Express

Abstract:Guotao Zhang, Ming Xiao Photonic glasses, isotropically assembled nanoparticles with short-range correlation, can produce angle independent structural colors. They ... [Opt. Express 32, 20432-20448 (2024)]

optics

What problem does this paper attempt to address?

Biomimetic Colloidal Photonic Crystals by Coassembly of Polystyrene Nanoparticles and Graphene Quantum Dots

Dali Huang,Minxiang Zeng,Ling Wang,Lecheng Zhang,Zhengdong Cheng

DOI: https://doi.org/10.1039/c8ra07158f

IF: 4.036

2018-01-01

RSC Advances

Abstract:Biomimetic nanostructured materials with iridescent structural colors have attracted great attention due to their potential in photonic devices, materials science, and biomedical engineering. The technological applications of artificial photonic crystals (PCs), however, are often hindered by their low color visibility. Herein, we report colloidal PCs with enhanced color visibility through the coassembly of thioglycerol-modified graphene quantum dots (GQDs) into the close-packed array of polystyrene (PS) nanospheres. The enhanced polystyrene PCs were fabricated by both centrifugal sedimentation and drop-casting methods. The color visibility of the resulting PCs was found to be strongly dependent on the hydrothermal time (i.e., carbonization) and the doping concentrations of GQDs. The PCs with brilliant reflection colors with red, green and blue (RGB) regions have been achieved by controlling the size of the constituent PS nanoparticles. As a proof of concept for photonic ink applications, we demonstrated a number of photonic images with RGB colors on multiple substrates including paper, silicon wafer and glass. This work is expected to provide new insight into the development of emerging advanced photonic crystals with high color visibility for applications such as colloidal paints, textile fabrics, and wearable displays.
Using Photonic Glasses as Colored Covers for Solar Energy Harvesting

Zhenpeng Li,Sinan Li,Tao Ma

DOI: https://doi.org/10.1002/adom.202202370

IF: 9

2022-12-18

Advanced Optical Materials

Abstract:With dielectric particles as assembly units and short‐range structural correlation, photonic glasses show great potential to serve as colored covers for solar energy harvesting. To guide this application, this work investigates various photonic glass structures, including their reflectivity, color, and solar transmittance. It demonstrates photonic glasses could generate various colors with sufficient brightness while keeping over 80% solar energy transmitted. The increasing demand for renewable energy is promoting technologies that integrate solar energy harvesting materials with the human living environment, such as building‐integrated photovoltaics. This places requirements on developing colored covers with a trade‐off between efficiency and aesthetics, providing a new stage for the large‐scale application of structural color technologies. This study investigates the theoretic feasibility of employing the photonic glass, a random packing of monodisperse dielectric microspheres, as the colored cover for solar energy harvesting. Based on numerous optical simulations, the color and average solar transmissivity of the photonic glasses with varying parameters are evaluated. Results show that using non‐absorbing microspheres with relatively high refractive index, about 3 μm thick photonic glasses can enable colors with lightness over 50 while keeping average solar transmissivity over 80%. Due to the short‐range structural correlation, it is demonstrated that photonic glasses can generate purple, blue, cyan, light green, and gray colors, but cannot help with yellow and red hues. Finally, the effects of several enhancement methods are clarified, and possible ways for expanding the color range are demonstrated. These results provide a comprehensive guide to the practical implementations of structural color using photonic glasses, particularly in the colorization of solar energy materials.

materials science, multidisciplinary,optics
Theoretic Guide for Using Photonic Glasses as Colored Covers for Solar Energy Harvesting

Zhenpeng Li,Sinan Li,Tao Ma

DOI: https://doi.org/10.1002/adom.202202370

2022-09-12

Abstract:The increasing demand for renewable energy is promoting technologies that integrate solar energy harvesting materials with the human living environment, such as building-integrated photovoltaics (BIPVs). This places requirements on developing colored covers with a trade-off between efficiency and aesthetics, providing a new stage for the large-scale application of structural color technologies. Here in this study, we have investigated the theoretic feasibility of employing the photonic glass, a random packing of monodisperse dielectric microspheres, as the colored cover for solar energy harvesting. Based on numerous optical simulations, we have evaluated the color and average solar transmissivity (AST) of the photonic glasses with varying parameters. Results show that using non-absorbing microspheres with relatively high refractive index, about 3 {\mu}m thick photonic glasses could enable colors with lightness over 50 while keeping AST at around 80%. Besides, we demonstrate that due to the short-range structural correlation, photonic glasses could generate purple, blue, cyan, light green, and grey colors, but cannot help with yellow and red color hues. Finally, the effects of several enhancement methods are clarified, and possible ways for expanding the color range are demonstrated. These results provide a comprehensive guide to the practical implementations of structural color using photonic glasses, particularly in the colorization of solar energy materials.

Optics,Applied Physics
Optimizing Color Saturation in Colloidal Photonic Crystals by Control of Absorber Amount and Distribution (Adv. Mater. Interfaces 12/2024)

Carina Bittner,Gudrun Bleyer,Nico Nees,Miguel Carneiro,Lukas Pflug,Michael Stingl,Nicolas Vogel

DOI: https://doi.org/10.1002/admi.202470033

IF: 5.4

2024-04-26

Advanced Materials Interfaces

Abstract:Bioinspired Structurally Colored Materials The striking coloration in the natural world is typically caused by light interference at nanostructured materials and the broadband light absorption of melanin pigments. In article 2300986, Nico Nees, Nicolas Vogel, and co‐workers use colloidal photonic crystals containing polydopamine as synthetic mimics of this structural coloration and investigate the total amount of absorber and the way of its incorporation to create the most saturated structural coloration.

materials science, multidisciplinary,chemistry
Tuning Disorder in Structurally Colored Bioinspired Photonic Glasses

Ahmet Demirors,Kalpana Manne,Sofia Magkiriadou,Frank Scheffold

DOI: https://doi.org/10.1039/d3sm01468a

IF: 4.046

2024-01-20

Soft Matter

Abstract:Colloidal crystals, such as opals, display bright and iridescent colors when assembled from submi-cron particles. While the brightness and purity of iridescent colors are well suited for ornaments, signaling, and anticounterfeiting, their angle dependence limits the range of their applications. In contrast, colloidal glasses display an angle-independent structural color that is tunable by the size and local arrangement of particles. However, the angle-independent color of colloidal photonic glasses usually yields pastel colors that are not vivid due to the disorder in the particle assembly. Here, we report on an electrophoretic assembly platform for tuning the level of disorder in the parti-cle system from a colloidal crystal to a colloidal glass. Altering the electric field in our electropho-retic platform allows for deliberate control of the assembly kinetics and thus the level of order in the particle assembly. With the help of microscopy, X-ray scattering, and optical characterization, we show that the photonic properties of the assembled films can be tuned with the applied electric field. Our analyses reveal that angle-independent color with optimum color brightness can be achieved in typical colloidal suspensions when the range of order is at ~3.2 particle diameters, which is ex-pected at a moderate electric field of ~15 V/mm.

polymer science,chemistry, physical,materials science, multidisciplinary,physics
Spectroscopic Properties of Eu-doped Oxynitride Glass–ceramics for White Light LEDs

Harried Karimi,Yuting Zhang,Shuo Cui,Ronghua Ma,Gu Li,Qiannan Wang,Jiajia Zhao,Xvsheng Qiao,Jincheng Du,Xianping Fan

DOI: https://doi.org/10.1016/j.jnoncrysol.2014.10.003

IF: 4.458

2014-01-01

Journal of Non-Crystalline Solids

Abstract:Novel oxynitride glass–ceramics with tremendously improved quantum yield and adjustable color coordinates were prepared with the conventional melt-and-quench method and subsequent annealing heat treatment. X-ray diffraction (XRD) and transmission electron microscopy (TEM) images revealed CaAl2Si2O8 and Y20N4Si12O48 crystalline phases were homogenously precipitated in the glass matrix. The optical absorption and photoluminescence (PL) spectrum measurements showed that a large portion of Eu3+ ions were reduced into Eu2+ which were crystallized into CaAl2Si2O8 phase during the heat treatment by substituting Ca2+ ions in them. Emission spectra evidently show that Eu2+ and Eu3+ ions were preferentially incorporated in CaAl2Si2O8 and Y20N4Si12O48 crystalline phases, respectively. This assignment was further supported by cation ionic radii and local charge balances, as well as defect chemistry considerations. The total emission intensity including both Eu2+ and Eu3+ ions was enhanced with increasing the annealing temperature, due to the conversion of Eu3+ to Eu2+ and the enhanced quantum efficiency of Eu3+ in the crystalline phase as compared to the glass matrix. As a result, the quantum yields (QYs) of the glass–ceramics were also enhanced significantly from 2.07% (the precursor glass) up to 43.33% (the maximum of the glass–ceramics). The emission ratio of Eu2+/Eu3+ changed from <1.0 to >4.0, which led this novel glass–ceramics with adjustable color coordinates ranging from red to blue controlled by varying the annealing temperature.
Optically Active Materials: Local Chemistry Engineering in Doped Photonic Glass for Optical Pulse Generation (Advanced Optical Materials 6/2019)

Jiejie Chen,Zhuo Shi,Shifeng Zhou,Zaijin Fang,Shichao Lv,Haohai Yu,Jianhua Hao,Huaijin Zhang,Jiyang Wang,Jianrong Qiu

DOI: https://doi.org/10.1002/adom.201970022

IF: 9

2019-01-01

Advanced Optical Materials

Abstract:In article number 1801413, Shifeng Zhou, Haohai Yu and co-workers demonstrate a novel transition-metal doped nanostructured photonic glass with smart optical modulation function, pointing to promising applications in all-fiber photonic systems. This work also provides significant clues for engineering a wide range of local-chemistry-dependent materials properties in amorphous solids.
Mesoscale Engineering of Photonic Glass for Tunable Luminescence

Yongze Yu,Zaijin Fang,Chuansheng Ma,Hiroyuki Inoue,Guang Yang,Shupei Zheng,Danping Chen,Zhongmin Yang,Atsunobu Masuno,Jiri Orava,Shifeng Zhou,Jianrong Qiu

DOI: https://doi.org/10.1038/am.2016.156

IF: 10.761

2016-01-01

NPG Asia Materials

Abstract:Control of the optical behavior of active materials through manipulation of their microstructure has led to the development of high-performance photonic devices with enhanced integration density, improved quantum efficiencies and controllable color output. However, the achievement of robust light-harvesting materials with tunable, broadband and flattened emission remains a long-standing goal owing to the limited inhomogeneous broadening in ordinary hosts. Here, we describe an effective strategy for the management of photon emission by manipulating the mesoscale heterogeneities in optically active materials. Importantly, this unique approach enables control of dopant–dopant and dopant–host interactions on the extended mesoscale. This allows the generation of intriguing optical phenomena such as a high activation ratio of the dopant (close to 100%), dramatically inhomogeneous broadening (up to 480 nm), notable emission enhancement and, moreover, simultaneously extension of the emission bandwidth and flattening of the spectral shape in glass and fiber. Our results highlight that the findings connect the understanding of and manipulation in the mesoscale realm to functional behavior on the macroscale, and the approach to manage the dopants based on mesoscale engineering may provide new opportunities for the construction of a robust fiber light source. Manipulating the mesoscale structure enables broadband emission from glass and fibre optic cables. To produce compact light sources for applications such as broadband telecommunication and surgical microscopy, researchers are experimenting with glass and fibres with luminescent cores that are doped with transition-metal ions. Shifeng Zhou from the South China University of Technology and co-workers have discovered that medium-range interactions between dopants and their host matrix can significantly widen emitted wavelength ranges to give brighter, broader light sources. Applying mesoscale engineering approach for a tantalate glass system produced localized heterogeneous regions, which can isolate emission centres. The team demonstrated the potential of this pioneering strategy by constructing glass and optical fibre with tunable luminescent output, and extremely broad bandwidth up to ~480 nm which is the largest value ever reported in doped glass to date. A new principle for management of dopant–dopant and dopant–host interactions by manipulation of mesoscale heterogeneity in a single active material is presented. The proposed mesoscale engineering approach results in dramatically inhomogeneous broadening of dopant, and for the first time show success in simultaneously extending emission bandwidth and flattening spectral shape in a doped glass and fiber.
Tailorable and Angle-Independent Colors from Synthetic Brochosomes

Hong Liu,Chao Xu,Qundong Xia,Yunbin Ying,Qiang Li,Xiaoyu Zhao,Yongjun Zhang,Shikuan Yang

DOI: https://doi.org/10.1021/acsnano.2c08598

IF: 17.1

2023-01-01

ACS Nano

Abstract:Although various artificial dyes and pigments have been invented, certain application fields need structural colors because they can last for centuries even under harsh conditions. Here, we report that the antireflective Ag brochosomes (soccer-ball-like microscale granules covered by nanobowls) become colorful when the nanobowls on the Ag brochosomes are filled by polystyrene (PS) nanospheres. The color originates from the enhanced electromagnetic resonances of the PS nanospheres by the surrounding metallic nanobowls, suggested by both the experimental and the simulation results. The color is determined by the size of the PS nanospheres. We can tailor the color simply by reducing the diameter of the PS nanospheres via the plasma etching treatment. The color intensity of the Ag brochosomes filled with PS nanospheres shows weak dependence on the observing angles, benefiting from their spherical shape. Plasma etching treatment of the Ag brochosomes filled with PS nanospheres through different masks can design various structural color patterns. The simple fabrication process and the easy processability make the Ag brochosomes filled with PS nanospheres have promising applications in the structural color fields.
Vivid structural colors from long-range ordered and carbon-integrated colloidal photonic crystals.

Xin Wang,Ziting Wang,Licheng Bai,Huaiyu Wang,Lei Kang,Douglas H Werner,Ming Xu,Bo Li,Jia Li,Xue-Feng Yu

DOI: https://doi.org/10.1364/OE.26.027001

IF: 3.8

2018-01-01

Optics Express

Abstract:A facile strategy to prepare high-quality colloidal photonic crystals (PCs) with good visibility is proposed. Based on a high refractive-index material (zinc sulfide), highly monodispersed colloidal particles are successfully produced and assembled into long-range ordered crystalline colloidal arrays. The carbon-based materials are in situ incorporated with the long-range ordered colloidal PCs, which endows PCs with the combined characteristics to simultaneously achieve an intense photonic stop band and excellent control of incoherent light scattering. Owing to these merits, the obtained ZnS colloidal PCs have demonstrated strong brightness with the maximum reflectivity of 98%. Moreover, the coloration, saturation, and viewing angle are all improved. This study provides a straightforward and cost-effective strategy to create structural colors with high-quality visibility, which is expected to facilitate future applications of colloidal PCs. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Dynamic incoherent scattering: Photonic glass with sensitive temperature- and humidity-responsiveness

Jie Sun,Yuewei Zheng,Jinqing Chen,Wei Hong

DOI: https://doi.org/10.1016/j.cej.2024.151131

IF: 15.1

2024-04-17

Chemical Engineering Journal

Abstract:Stimuli-responsive structurally-colored materials have been extensively developed for decades based on conventional strategies by manipulating periods and refractive indices of the system. Herein, a controlled incoherent scattering strategy is demonstrated for fabricating stimuli-responsive photonic glass featured by scalable produce and dynamic saturation. The incoherent scattering in photonic glass systems is controlled by responsive light absorbers and wetting, leading to a conversion between a whitened state dominated by incoherent scattering and a structurally-colored state dominated by structural resonance. Wetting the system reduces incoherent scattering significantly to reveal the structural color of photonic glass, while engineered absorbers can change the absorption with stimuli-response to shift the shield against incoherent scattering. Responsive structural colors based on the photonic glass systems are presented, realizing wetting-, humidity- and temperature-dependent structurally-colored sensors and patterns. Given that such incoherent-scattering-controlled strategy can be further extended by functional absorbers and wettability modifications, this work may inspire scalable and effective structurally-colored materials with invisible patterning capability for anti-counterfeiting and sensors.

engineering, chemical, environmental
Photonic Crystal Materials with Full Spectrum Structural Color Modulated by Co‐Assembly Strategy

Qilin Guo,Jia Guo,Changchun Wang

DOI: https://doi.org/10.1002/adom.202401139

IF: 9

2024-06-01

Advanced Optical Materials

Abstract:A concise overview is provided about highly efficient co‐assembly strategies utilizing block copolymers and colloidal nanoparticles for the creation of photonic crystal materials with precisely tailored optical functional nanostructures and tunable colors across the entire visible spectrum. The prospects and challenges are also outlined for exploring the advanced and rich design of co‐assembly‐based photonic functional materials. Photonic materials have drawn considerable attention for a great deal of promising applications with versatile optical characteristics and functionalities. This review provides a concise overview of co‐assembly strategies for the creation of photonic crystals, offering precise control over structural colors throughout the entire visible spectrum by manipulating the interaction of light with complex micro‐nano structures. Specifically, the utilization of block copolymers (BCPs) and colloidal nanoparticles as wavelength‐scale building blocks facilitates the modulation of defined nanostructures with functionality and tailorability for diverse coloration effects. Additionally, by facilely adjusting the relative ratios, a flexible balance can be struck between photonic crystals and photonic glasses for dynamic control of arrangements. Finally, this review concludes by discussing the future outlook and challenges in advancing co‐assembly‐based photonic functional materials.

materials science, multidisciplinary,optics
Optical Metasurfaces for Multiplex High-Performance Grating-Type Structural Colors.

Liye Li,Shengxiao Jin,Senyong Hu,Yun Huang,Hongshun Sun,Lijun Ma,Tian Kang,Yusa Chen,Shisong Xiong,Guanzhou Lin,Bingquan Yang,Meizhang Wu,Zhimei Qi,Wengang Wu

DOI: https://doi.org/10.1364/ol.482891

2023-01-01

Abstract:Optical metasurfaces provide a significant approach for the production of structural colors due to their excellent optical control abilities. Herein, we propose trapezoidal structural metasurfaces for achieving multiplex grating-type structural colors with high comprehensive performance originating from the anomalous reflection dispersion in the visible band. Single trapezoidal metasurfaces with different x-direction periods can tune the angular dispersion regularly from 0.036 rad/nm to 0.224 rad/nm to generate various structural colors, and composite trapezoidal metasurfaces with three kinds of combinations can achieve multiplex sets of structural colors. The brightness can be controlled by adjusting the distance between the trapezoids in a pair accurately. The designed structural colors have higher saturation than traditional pigmentary colors, whose excitation purity can reach 1.00. The gamut is about 158.1% of the Adobe RGB standard. This research has application potential in ultrafine displays, information encryption, optical storage, and anti-counterfeit tagging.
Tuning the Optical Properties in CsPbBr3 Quantum Dot-Doped Glass by Modulation of Its Network Topology

Zhousu Xu,Tao Chen,Duoduo Zhang,Guojun Zheng,Zhuo Wang,Zhijun Ma,Jinhua Yan,Xianwei Wang,Xiaofeng Liu,Jianrong Qiu

DOI: https://doi.org/10.1039/d1tc00993a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:By modulating the glass network topology, the photoluminescence intensity of CsPbBr3 QD-doped glasses can be enhanced by 8 times and the nonlinear absorption response can change from saturable absorption to reverse saturable absorption.
Efficient structural color from pigment-loaded nanostructures

Tianqi Sai,Luis S. Froufe-Pérez,Frank Scheffold,Bodo D. Wilts,Eric R. Dufresne

2023-07-23

Abstract:Color can originate from wavelength-dependence in the absorption of pigments or the scattering of nanostructures. While synthetic colors are dominated by the former, vivid structural colors found in nature have inspired much research on the latter. However, many of the most vibrant colors in nature involve the interactions of structure and pigment. Here, we demonstrate that pigment can be exploited to efficiently create bright structural color at wavelengths outside its absorption band. We created pigment-enhanced Bragg reflectors by sequentially spin-coating layers of poly-vinyl alcohol (PVA) and polystyrene (PS) loaded with $\beta$-carotene (BC). With only 10 double layers, we acheived a peak reflectance over $0.8$ at 550 nm and normal incidence. A pigment-free multilayer made of the same materials would require 25 double layers to achieve the same reflectance. Further, pigment loading suppressed the Bragg reflector's characteristic iridescence. Using numerical simulations, we further show that similar pigment loadings could significantly expand the gamut of non-iridescent colors addressable by photonic glasses.

Soft Condensed Matter,Optics
Reflective angle-insensitive structural colors with a wide color gamut employing a Ni/ Ge_2Sb_2Te_5 bilayer broadband absorber

Zhenzhen Duan,Weijie Chen,Zexiang He,Jian Yang,Guangshi Cai,Haotong Wang,Ning Wang,Zexiong Hu,Dan Wang,nan chen,Yikun Bu

DOI: https://doi.org/10.1364/oe.529919

IF: 3.8

2024-08-22

Optics Express

Abstract:Zhenzhen Duan, Weijie Chen, Zexiang He, Jian Yang, Guangshi Cai, Haotong Wang, Ning Wang, Zexiong Hu, Dan Wang, Nan Chen, Yikun Bu A novel approach is proposed for generating reflective angle-insensitive structural colors with high purity, high brightness, and a wide ... [Opt. Express 32, 31866-31879 (2024)]

optics
Spherical Colloidal Photonic Crystals with Selected Lattice Plane Exposure and Enhanced Color Saturation for Dynamic Optical Displays.

Jing Zhang,Zhijun Meng,Ji Liu,Su Chen,Ziyi Yu

DOI: https://doi.org/10.1021/acsami.9b15352

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:While structural color materials have nonfading properties and contribute significantly to the sustainable development of pigments or dyes, they are plagued by low color saturation and limited color tunability. Here, we describe a new type of spherical colloidal photonic crystals (CPCs) prepared by a droplet-based microfluidic strategy, featuring enhanced color saturation and tunable structural colors. Methyl viologen (MV) functionalized SiO colloids were synthesized and used for the preparation of CPCs in microdroplets. Because of the absorption of incoherently scattered light by MV, the ratio of peak-to-background amplitude in the reflectance spectra of CPCs is increased, leading to brilliant structural color with enhanced saturation. The lattice plane exposure of spherical CPCs depends on the refractive index contrast between the filling medium and SiO building blocks, and this offers an alternative way to tune the structural color in a spherical CPC. Accordingly, a dynamic optical display was constructed, providing valuable insights to the future development of structural color-based sensors, surface coatings, or displays.
Nonlinear Photonic Glass: All‐Inorganic Transparent Composite Materials for Optical Limiting (Advanced Optical Materials 10/2020)

Xu Feng,Zhuo Shi,Jiejie Chen,Tao Yu,Xiaofang Jiang,Guanxin Du,Jianrong Qiu,Shifeng Zhou

DOI: https://doi.org/10.1002/ADOM.202070042

IF: 9

2020-01-01

Advanced Optical Materials

Abstract:In article number 1902143, Shifeng Zhou and co-workers propose a novel topological engineering strategy for tuning the high-order light–matter interaction in glass. The work provides valuable references for the exploration of novel nonlinear photonic glass. As a typical example, a glass candidate with notably improved capability for dynamic optical radiation control is successfully constructed.
Supramolecular glasses with color-tunable circularly polarized afterglow through evaporation-induced self-assembly of chiral metal-organic complexes

Fei Nie,Ke-Zhi Wang,Dongpeng Yan

DOI: https://doi.org/10.1038/s41467-023-37331-0

2023-03-24

Abstract:The fabrication of chiral molecules into macroscopic systems has many valuable applications, especially in the fields of optical displays, data encryption, information storage, and so on. Here, we design and prepare a serious of supramolecular glasses (SGs) based on Zn-L-Histidine complexes, via an evaporation-induced self-assembly (EISA) strategy. Metal-ligand interactions between the zinc(II) ion and chiral L-Histidine endow the SGs with interesting circularly polarized afterglow (CPA). Multicolored CPA emissions from blue to red with dissymmetry factor as high as 9.5 × 10-3 and excited-state lifetime up to 356.7 ms are achieved under ambient conditions. Therefore, this work not only communicates the bulk SGs with wide-tunable afterglow and large circular polarization, but also provides an EISA method for the macroscopic self-assembly of chiral metal-organic hybrids toward photonic applications.
Tuning Ag Quantum Clusters in Glass As an Efficient Spectral Converter: from Fundamental to Applicable

Wenyan Zheng,Pengcheng Li,Chenhao Wang,Xvsheng Qiao,Guodong Qian,Xianping Fan

DOI: https://doi.org/10.1016/j.jnoncrysol.2022.121910

IF: 4.458

2022-01-01

Journal of Non-Crystalline Solids

Abstract:Ag quantum clusters (Ag QCs) embedded in glasses are promising for various optoelectronic devices, but the manipulation over their aggregation states toward efficient photoluminescence (PL) is still challenging. Here, we propose two network strategies to tailor the Ag QCs aggregation and PL performance inside borate glass. Using the solubility strategy, the introduced network modifier (BaO) brings [BO3] -> [BO4]- transformation and poses steric hindrance, leading to the growth of Ag QCs. Through the charge compensator strategy (Al2O3), it brings negatively charged [AlO4]- units that favor isolated Ag+ ions to meet charge balance, rendering the cluster dissociation. With further SiO2 incorporation, the borosilicate constructs a rigid network that improves the glass stability and prevents molecular motions in Ag QCs, promoting PL quantum efficiency (up to 90.55%). Based on these design principles, the glass with highly emissive and stable Ag QCs is prepared and presents potential in the spectral converter for organic solar cells.

Enhancing color saturation in photonic glasses through optimized absorption

Biomimetic Colloidal Photonic Crystals by Coassembly of Polystyrene Nanoparticles and Graphene Quantum Dots

Using Photonic Glasses as Colored Covers for Solar Energy Harvesting

Theoretic Guide for Using Photonic Glasses as Colored Covers for Solar Energy Harvesting

Optimizing Color Saturation in Colloidal Photonic Crystals by Control of Absorber Amount and Distribution (Adv. Mater. Interfaces 12/2024)

Tuning Disorder in Structurally Colored Bioinspired Photonic Glasses

Spectroscopic Properties of Eu-doped Oxynitride Glass–ceramics for White Light LEDs

Optically Active Materials: Local Chemistry Engineering in Doped Photonic Glass for Optical Pulse Generation (Advanced Optical Materials 6/2019)

Mesoscale Engineering of Photonic Glass for Tunable Luminescence

Tailorable and Angle-Independent Colors from Synthetic Brochosomes

Vivid structural colors from long-range ordered and carbon-integrated colloidal photonic crystals.

Dynamic incoherent scattering: Photonic glass with sensitive temperature- and humidity-responsiveness

Photonic Crystal Materials with Full Spectrum Structural Color Modulated by Co‐Assembly Strategy

Optical Metasurfaces for Multiplex High-Performance Grating-Type Structural Colors.

Tuning the Optical Properties in CsPbBr3 Quantum Dot-Doped Glass by Modulation of Its Network Topology

Efficient structural color from pigment-loaded nanostructures

Reflective angle-insensitive structural colors with a wide color gamut employing a Ni/ Ge_2Sb_2Te_5 bilayer broadband absorber

Spherical Colloidal Photonic Crystals with Selected Lattice Plane Exposure and Enhanced Color Saturation for Dynamic Optical Displays.

Nonlinear Photonic Glass: All‐Inorganic Transparent Composite Materials for Optical Limiting (Advanced Optical Materials 10/2020)

Supramolecular glasses with color-tunable circularly polarized afterglow through evaporation-induced self-assembly of chiral metal-organic complexes

Tuning Ag Quantum Clusters in Glass As an Efficient Spectral Converter: from Fundamental to Applicable