Abstract:<p>Rolling element bearings are used as main supports and are key sources of vibrations for aero-engine rotor systems. Mainly including the inner and outer rings, cages, and balls or rollers, the complicated mechanical structures of rolling element bearings exhibit nonlinear behaviors due to the bearing clearance, nonlinear Hertzian contact forces, and defects. Due to imbalanced rotations, which are unavoidable, a wide variety of nonlinear behaviors can be expected in dual-rotor systems. Thus, in this study, we focus on the nonlinear behaviors of a dual-rotor system supported by a rolling element bearing. The nonlinear characteristics, such as the time-varying stiffness and primary resonance behaviors affected by the ball bearing parameters, are discussed. A dual-rotor system supported by a ball bearing was built while considering the nonlinear factors from the 4# ball bearing (at left end of the high-pressure rotor system). The nonlinear governing equations were established using the finite element method. Using the numerical methods, the effects of the bearing clearance on the time-varying stiffness and primary resonance behaviors are analyzed in detail. The results indicate that the mean values of the equivalent stiffness of the system and the rotation speed for forced resonance decrease as the clearance of the ball bearing increases. Periods of "zero-stiffness" occur when <span class="math"><math>Ω1</math></span> (the rotation speed of the high-pressure rotor system) is less than 800 rad/s, and the periods of "zero-stiffness" over one period grow as the bearing clearance is increased. Meanwhile, in the case of a small or even zero clearance of a ball bearing, the amplitude–frequency curves still exhibit "hard characteristics" in the forced resonance domain, and hysteresis and jump resonance occur. All of the results can be used to establish base-line behaviors for system status determination, prediction, and control and to eliminate vibrations.</p>

Combination resonances of a dual-rotor-bearing-casing system

Combination Resonances of Rotor Systems with Asymmetric Residual Preloads in Bolted Joints

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Review of Nonlinear Rotor-Bearing Dynamics System

Nonlinear response analysis for a dual-rotor system supported by ball bearing

Nonlinear vibration and stability analysis of a dual-disk rotor-bearing system under multiple frequency excitations

Nonlinear resonance characteristics of a dual-rotor system with a local defect on the inner ring of the inter-shaft bearing

Nonlinear vibrations of a dual-rotor-bearing-coupling misalignment system with blade-casing rubbing

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine

Nonlinear Modeling and Vibration Response Analysis of a Dual-Rotor System with an Inter-Shaft Graphite Seal

Research of the internal resonances on a nonlinear dual-rotor based on the energy tracks shifting

Vibration characteristics investigation of a dual rotor-bearing outer ring–pedestal-casing system with clearance fit

Nonlinear Dynamics and Combination Resonance of a Flexible Turbine Blade with Contact and Friction of Shrouds

The coupled bending-torsional dynamic behavior in the rotating machinery: modeling, simulation and experiment validation

Dynamics Analysis Control on Dual Delay Bearing-Rotor System

Response Analysis Of A Linear Rotor-Bearing System Under Combined Non-Stationary Seismic And Harmonic Excitations

High dimensional nonlinear spring characteristic modelling and vibration analyses of subharmonic resonance of a dual-rotor system based on energy tracks

Dynamic characteristics analysis of a dual-rotor system with inter-shaft bearing

Nonlinear Dynamic Analysis Of Rotor-Bearing-Pedestal Systems With Multiple Fit Clearances

Nonlinear combined harmonic resonances of composite cylindrical shells operating in hygro-thermo-electro-magneto-mechanical fields