Evaluation of factors controlling net photosynthetic rate in Scots pine seedlings under field conditions without water stress

P. Hari,E. Hallman,R. Salminen,E. Vappavuori

DOI: https://doi.org/10.1007/BF00347962

1981-03-01

Oecologia

Abstract:

What problem does this paper attempt to address?

Pervasive Health Monitoring Based on Internet of Things: Two Case Studies

Anurag,Sanaz Rahimi Moosavi,Amir-Mohammad Rahmani,Tomi Westerlund,Geng Yang,Pasi Liljeberg,Hannu Tenhunen

DOI: https://doi.org/10.4108/icst.mobihealth.2014.257395

2014-01-01

Abstract:With the continuous evolution of wireless sensor networks and Internet of Things (IoT) various aspects of life will benefit. IoT based pervasive healthcare system has potential to provide error free medical data and alerting system in critical conditions with continuous monitoring. The system will minimize the need of dedicated medical personnel for patient monitoring and help the patients to lead a normal life besides providing them with high quality medical service. In this paper, we provide the implementation of IoT-based architectures for remote health monitoring based on two popular wireless technologies, Wi-Fi and ZigBee. We analyse the two architectures with the aim of identifying their pros and cons and discuss suitability of mentioned wireless communication technologies for different healthcare application domains.
BER-based Power Scheduling in Wireless Sensor Networks

Senlin Zhang,Zixiang Wang,Meikang Qiu,Meiqin Liu

DOI: https://doi.org/10.1007/s11265-013-0776-9

2013-01-01

Journal of Signal Processing Systems

Abstract:In wireless sensor networks, there are many information exchanges between different terminals. In order to guarantee a good level of Quality of Service (QoS), the source node should be smart enough to pick a stable and good quality communication route in order to avoid any unnecessary packet loss. Due to the error-prone links in a wireless network, it is very likely that the transmitted packets over consecutive links may get corrupted or even lost. It is known that retransmissions will increase the overhead in the network, which in turns increase the total energy consumption during data transmission. In this paper, we focus on the Bit Error Rate (BER) during packet transmission and propose a power scheduling scheme to reduce the total energy consumption in the routing. Our approach controls the transmission power of each transmitter to achieve the minimum energy consumption for successful packet transmission. Considering the limited bandwidth resource, we also plan the multihop route while considering the BER and network load at the same time. The simulation results show that our approach can reduce the total energy consumption during data transmission.
Modeling and Analysis of Energy Efficiency and Interference for Cellular Relay Deployment

Fanny Parzysz,Mai Vu,François Gagnon

DOI: https://doi.org/10.48550/arXiv.1503.06242

2015-03-21

Abstract:By relying on a wireless backhaul link, relay stations enhance the performance of cellular networks at low infrastructure cost, but at the same time, they can aggravate the interference issue. In this paper, we analyze for several relay coding schemes the maximum energy gain provided by a relay, taking into account the additional relay-generated interference to neighboring cells. First, we define spatial areas for relaying efficiency in log-normal shadowing environments and propose three easily-computable and tractable models. These models allow the prediction of 1) the probability of energy-efficient relaying, 2) the spatial distribution of energy consumption within a cell and 3) the average interference generated by relays. Second, we define a new performance metric that jointly captures both aspects of energy and interference, and characterize the optimal number and location of relays. These results are obtainable with significantly lower complexity and execution time when applying the proposed models as compared to system <a class="link-external link-http" href="http://simulations.We" rel="external noopener nofollow">this http URL</a> highlight that energy-efficient relay deployment does not necessarily lead to interference reduction and conversely, an interference-aware deployment is suboptimal in the energy consumption. We then propose a map showing the optimal utilization of relay coding schemes across a cell. This map combines two-hop relaying and energy-optimized partial decode-forward as a function of their respective circuitry consumption. Such a combination not only alleviates the interference issue, but also leads to a reduction in the number of relays required for the same performance.

Information Theory
Power-Aware Cooperative Relay Selection Strategies in Wireless Ad Hoc Networks.

Yan Chen,Guanding Yu,Peiliang Qiu,Zhaoyang Zhang

DOI: https://doi.org/10.1109/pimrc.2006.254178

2006-01-01

Abstract:Cooperative diversity is an effective technique to combat multipath fading. When this technique is applied to ad hoc networks, it is a key issue to design distributed and power-efficient relay selection strategies. In this paper, we propose the power-aware relay selection (PARS) strategies to maximize the network lifetime. The PARS strategies are composed of the optimal power allocation(OPA) and three power-aware selection criteria. The OPA aims at minimizing the overall transmit power, while the three criteria select the relay that best help extend the network lifetime, based on both the OPA results and the residual power levels of the nodes. We combine our strategies with the opportunistic relay model, which is based on a 802.11b-like media access control (MRC) protocol, so the selection process can be done in a totally distributed way. Simulation results show that the proposed strategies have great improvement in both network lifetime and power efficiency
Performance Optimization of Energy Efficient Semantic Communications over Wireless Networks

Zhaohui Yang,Mingzhe Chen,Zhaoyang Zhang,Chongwen Huang,Qianqian Yang

DOI: https://doi.org/10.1109/vtc2022-fall57202.2022.10012845

2022-01-01

Abstract:In this paper, the problem of wireless resource allocation and semantic information extraction for energy efficient semantic communications over wireless networks is investigated. In the considered model, each user first extracts the semantic information from its large-scale data, and then transmits the small-sized semantic information to the base station (BS) which recovers the original data. Due to the limited energy budget of wireless users, both local computational energy and transmission energy must be considered. This joint computation and communication problem is formulated as an optimization problem whose goal is to minimize the total energy consumption of the network under a latency constraint. To solve this problem, an iterative algorithm is proposed where the optimal solution for joint bandwidth allocation, power control, and computation frequency optimization problem can be obtained. Numerical results show the effectiveness of the proposed algorithm.
Privacy-Preserving Wireless Sensor Networks for E-Healthcare Applications

Amani K. Samha,Ghalib H. Alshammri,Niroj Kumar Pani,Yogesh Misra,Venkata Ratnam Kolluru

DOI: https://doi.org/10.1142/s0218843024500060

2024-03-15

International Journal of Cooperative Information Systems

Abstract:International Journal of Cooperative Information Systems, Ahead of Print. Wireless sensor networks (WSNs) are a powerful support system for the fundamental infrastructure that is required to monitor physiological and activity parameters (WSN). Wearable devices, which are also referred to as wireless nodes in the scientific world, are what are used in order to measure one or more of the user's vital signs. Each and every wireless node is a teeny-tiny device that is meant to be supplied with enough amounts of storage space, power, and transmission capability. The loss of data packets may occur during the transmission of data via a wireless medium for a number of reasons. These reasons include interferences, improper deployment circumstances, distance, and inadequate signal strength. The monitoring of a user's physiological information and postural activity information in various applications, such as home care and hospital care, is the primary emphasis of this study. In this work, the WSN was shown thanks to the introduction of wireless sensor nodes that were created locally. These wireless sensor nodes are used in the process of analyzing many aspects of a network, such as the received signal strength, transmission offset, packet delivery ratio (PDR), and signal-to-noise interference. The work significantly improves the capabilities of conventional WSN by implementing a variety of alternative communication approaches, such as network-coded cooperative communication (NC-CC) and cooperative communication (CC). The system that is being shown makes it feasible to localize the user's approximate position inside an indoor setting without making use of any camera network connections. This is made possible by the system's ability to determine the user's location via triangulation. This is one of the benefits that the system provides. A hospital sensor network, an example of which is being shown here, is capable of doing real-time monitoring of a patient's postural activity as well as their general health. The method is being promoted in order to ensure that the patient will get assistance in a timely manner that is adequate to his/her needs. Involving NC-CC enables the effective sharing of real-time data among the group of privileged duty nurses while simultaneously minimizing the amount of network traffic, latency, and throughput. This is possible because of NC-CC protocol. The findings of the experiments showed that the proposed method of communication, which is known as dynamic retransmit/rebroadcast decision control, is a significant advancement in the network coding approach that is presently being utilized. This was demonstrated by the fact that the method was shown to be significantly more effective.

computer science, information systems
Collaborative Beamforming and Dirty Paper Coding Assisted Transmission Strategy for E-Health Wireless Sensor Networks.

Feng Han,Ying Chang,Pingyi Fan,Athanasios V. Vasilakos

DOI: https://doi.org/10.1145/1582379.1582616

2009-01-01

Abstract:Very recently, the advancements of these years in the realms of sensors, wireless communications, and pervasive computing have been proposed to facilitate the health-care service and/or disaster relief. As essential components of these tele-medical systems, the wireless sensor networks for medical purpose become a growing sub-field in the Wireless and Pervasive Communications, aiming to provide both reliable signal propagation and low network latency for physiological information. However, a substantial number of existing systems reveal that the two merits typically contradict each other, which calls for a reasonable tradeoff between them. In this paper, we propose a novel transmission strategy that allows retransmissions while still maintaining low latency for E-health wireless sensor networks. The newly developed strategy incorporates the techniques of collaborative beamforming (CB) and dirty paper (DP) coding, which simultaneously facilitate a successive information flow and allow timely retransmission of unsuccessfully decoded message. As will be shown in this paper, the two aspects of requirements on E-health sensor networks, i.e. high reliability and low latency, come to a reasonably desirable tradeoff in our CB-DP scheme. Then, we derive an explicit expression of outage probability of this scheme as a function of wireless channel characteristics, the number of participating sensor nodes, transmission power and retransmission power budget. Finally, some numerical results demonstrating the effectiveness of this transmission strategy are also provided.
A Network-based System Architecture for Remote Medical Applications

huimin she,zhonghai lu,axel jantsch,lirong zheng,dian zhou

2007-01-01

Abstract:Nowadays, the evolution of wireless communication and network technologies enables remote medical services to be available everywhere in the world. In this paper, a network-based system architecture adopting wireless personal area network (WPAN) protocol IEEE 802.15.4/Zigbee standard and 3G communication networks for remote medical applications is proposed. In the proposed system, the number and type of medical sensors are scalable depending on individual needs. This feature allows the system to be flexibly applied in several medical applications. Furthermore, a differentiated service using priority scheduling and data compression is introduced. This scheme can not only reduce transmission delay for critical physiological signals and enhance bandwidth utilization at the same time, but also decrease power consumption of the hand-held personal server which uses battery as the energy source.
Towards the Internet of Medical Things for Real-Time Health Monitoring over Wi-Fi

Yazdan Ahmad Qadri,Haejoon Jung,Dusit Niyato

DOI: https://doi.org/10.1109/mnet.2024.3352598

IF: 10.294

2024-01-01

IEEE Network

Abstract:The introduction of wearables in the consumer market has led to an exponential proliferation of connected healthcare devices. They can monitor the status of health ubiquitously and provide insights about long-term and short-term health issues. The time-critical nature of such a system can save lives by generating timely alerts in case of health anomalies. To achieve this objective, in this paper, we specify quality of service (QoS) requirements and present a three-layer design framework of Healthcare Internet of Things (H-IoT) networks. Furthermore, we identify the key enabling technologies to support real-time communication in IEEE 802.11 wireless local area networks (WLANs) such as multi-link operation (MLO), orthogonal frequency division multiple access, spectrum expansion, and enhancing channel utilization over Wi-Fi networks. Moreover, we present a representative case study on the ambient assisted living (AAL) scenario, where the efficacy of MLO is considered to achieve ultra-low latency in a Wi-Fi-based H-IoT network. This study provides a template for other health-related applications that are strictly latency-bound, such as remote surgeries, e-consultations, and countering pandemics.

computer science, information systems,telecommunications,engineering, electrical & electronic, hardware & architecture
Medical Grade QoS Improvement Using IEEE802.11e WLAN Protocol

Luae’ A. Al-Tarawneh

DOI: https://doi.org/10.1007/978-3-030-01659-3_26

2019-01-01

Abstract:This paper describes an adaptive service differentiation scheme for medical grade QoS over WLAN healthcare networks. The wireless transmission of medical applications over wireless networks needs special QoS requirements meanwhile, IEEE802.11 Standard does not fulfill the QoS requirement yet. Enhanced Distributed Channel Access (EDCA) of the IEEE 802.11e Standard is used to enhance the QoS, where traffic priorities are categorized according to their criticality. The simulation has been performed to deliver three traffics with different priorities. The proposed algorithm is evaluated using NS2 simulation. The simulation results shows that the medical access categorization and the contention window control mechanism significantly improve the performance of a medical network over IEEE 802.11E. Comparison results show significant advantage for the new proposed scheme.
Best Relay Selection Strategy in Cooperative Spectrum Sharing Framework with Mobile-Based End User

Lama N. Ibrahem,Mamoun F. Al-Mistarihi,Mahmoud A. Khodeir,Moawiah Alhulayil,Khalid A. Darabkh

DOI: https://doi.org/10.3390/app13148127

2023-07-12

Applied Sciences

Abstract:In this work, a cognitive relay network (CRN) with interference constraint from the primary user (PU) with a mobile end user is studied. The proposed system model employs a half-duplex transmission between a single PU and a single secondary user (SU). In addition, an amplify and forward (AF) relaying technique is employed between the SU source and SU destination. In this context, the mobile end user (SU destination) is assumed to move at high vehicular speeds, whereas other nodes (SU Source, SU relays and PU) are assumed to be stationary. The proposed scheme dynamically determines the best relay for transmission based on the highest signal-to-noise (SNR) ratio by deploying selection combiner at the SU destination, thereby achieving diversity. All channels connected with the stationary nodes are modelled using Rayleigh distribution, whereas all other links connected with the mobile end user are modelled using Nakagami-m fading distribution (m<1). The outage probabilities (OPs) are obtained considering several scenarios and Monte Carlo simulation is used to verify the numerical results. The obtained results show that a variety of factors, including the number of SU relays, the severity of the fading channels, the position of the PU, the fading model, and the mobile end user speed, might influence the CRN’s performance.

materials science, multidisciplinary,engineering,chemistry,physics, applied
QoS-Aware Buffer-Aided Relaying Implant WBAN for Healthcare IoT: Opportunities and Challenges

Guofa Cal,Yi Fang,Jinming Wen,Guojun Han,Xiaodong Yang,Guofa Cai

DOI: https://doi.org/10.1109/mnet.2019.1800405

IF: 10.294

2019-07-01

IEEE Network

Abstract:The Internet of Things has motivated a paradigm shift in the development of various applications such as mobile health. The wireless body area network (WBAN) comprises many low-power devices in, on, or around the human body, which offers a desirable solution to monitoring physiological signals for mobile health applications. In the implant WBAN, an implanted medical device transmits its measured biological parameters to a target hub with the help of at least one on-body device(s) to satisfy its strict requirements on size, quality of service (QoS, e.g., reliability), and power consumption. In this article, we first review the recent advances in conventional cooperative WBANs. Afterward, to address the drawbacks of the conventional cooperative WBAN, a QoS-aware buffer-aided relaying framework is proposed for the implant WBAN. In the proposed framework, hierarchical modulations are considered to fulfill the different QoS requirements of different sensor data from an implanted medical device. We further conceive some new transmission strategies for the buffer-aided signal-relay and multi-relay implant WBANs. Simulation results show that the proposed cooperative WBAN provides better performance than its conventional cooperative counterparts. Finally, some open research challenges regarding the buffer-aided multi-relay implant WBAN are pointed out to inspire more research activities.

computer science, information systems,telecommunications,engineering, electrical & electronic, hardware & architecture
A New Optimal Relay Selection Strategy for the Coincident Multi-User Access.

Jiajia Mei,Jie Zeng,Bei Liu,Xin Su,Chang Wang,Qi Liu,Shihai Shao

DOI: https://doi.org/10.1109/ismict.2018.8573697

2018-01-01

Abstract:Non-orthogonal multiple access (NOMA) has been recognized as one of the promising multiple access technologies to provide higher spectral efficiency and system capacity to address several challenges in the fifth generation (5G) wireless systems. Telemedicine in the process of being greatly advanced by the high-reliable communication in future 5G wireless systems. This paper proposed a novel optimal relay selection (RS) strategy for the cooperative NOMA to achieve the minimum outage probability, which means that the number of retransmissions in hybrid automatic repeat request (HARQ) is decreased and hence indirectly reduce the communication latency. Small latency ensures the validity of medical data, thereby improving the quality of service (QoS) in medical communications. In addition, compared to another optimal relay selection, namely two-stage strategy, the proposed enhanced max-min RS has a lower computational complexity and lower storage overhead. The proposed enhanced max-min RS strategy can reduce almost 43% storage overhead and 95% latency caused by selection strategy in the cooperative RS-NOMA system used for wireless medical communications.
Protocol Wireless Medical Sensor Networks in IoT for the Efficiency of Healthcare

El Miloud Ar-Reyouchi,Kamal Ghoumid,Doha Ar-Reyouchi,Salma Rattal,Réda Yahiaoui,Omar Elmazria,Reda Yahiaoui

DOI: https://doi.org/10.1109/jiot.2021.3125886

IF: 10.6

2021-01-01

IEEE Internet of Things Journal

Abstract:In this article, a new medical communication scheme, protocol wireless medical sensor networks for the efficiency of healthcare (PWMSN4EoCH), shorten by (PEH), which uses hasty strategy and random network coding (RNC), is proposed. The new concept improves the performance of the healthcare network. It quickly analyzes the medical network description, focusing on some basic parameters for narrowband Internet of Things (NB-IoT) systems in wireless mesh networks (WMNs). This PEH effectively meets the requirements prescribed for wireless telemedicine applications in which medical sensors (MSs) share the downlink and uplink resources to its neighborhood, including wireless health hubs (WHHs) and wireless base stations (WBSs) for controlling the health of the human body. The PEH scheme substantially accelerates the implementation devices of telemedicine for patient satisfaction. In contrast, the state-of-the-art technique (SoAT) scheme, which is currently used, misses the entirety of the proposed principle. The proposed scheme is compared with the SoAT in terms of message size (bytes), round-trip time (RTT) (ms), overall network capacity (ONC) (bytes/s, and delivery delay (DD) in ms. Our investigation has proved that the RTT, ONC, and DD of the proposed PEH are much better than the SoAT schemes, achieving 64%, 66%, and 71%, respectively. The simulation studies clearly indicate that the PEH introduces more than 64% performance enhancement over the SoAT scheme.

computer science, information systems,telecommunications,engineering, electrical & electronic
Energy Efficiency Analysis of Relay-Assisted Cellular Networks

Huan Yu,Yunzhou Li,Marios Kountouris,Xibin Xu,Jing Wang

DOI: https://doi.org/10.1186/1687-6180-2014-32

2014-01-01

EURASIP Journal on Advances in Signal Processing

Abstract:To meet the demand for higher throughput, improved coverage and enhanced reliability, future wireless cellular networks face significant technical challenges. One promising solution is to place relay stations between transmitters and receivers in the cellular network. Meanwhile, as energy consumption reduction has been an important concern for the wireless industry, energy-efficient communications is of prime interest for future networks. In this paper, we study whether and how relays can improve the energy efficiency of cellular networks. Specifically, the energy efficiency of relay-assisted cellular networks is analyzed using tools of stochastic geometry. We first derive the coverage probability for the macro base station (MBS) to user (UE), the MBS to relay station (RS), and the RS to UE links, and then we model the power consumption at the MBS and RS. Based on the analytical model and expressions, the energy efficiency of relay-assisted cellular networks is then evaluated and is shown to be strictly quasi-concave on the transmit power for MBS to UE link or the RS to UE link. Numerical results show that the energy efficiency first improves while it hits a ceiling as the MBS density increases.
Channel and Traffic Status Aware Relay Selection and Traffic Queue Analysis in Wireless User-Relaying Networks.

Xing Zhang,Jing Xiao,Yue Gao,Wenbo Wang

DOI: https://doi.org/10.1109/wts.2012.6266116

2012-01-01

Abstract:User relaying is a very effective technique to achieve cooperative diversity in wireless networks. In this paper, a new relay selection scheme is proposed jointly considering the channel conditions and traffic status of relay nodes. We introduce traffic model with MMPP (two-state Markov Modulated Poisson Process) for all users, and then jointly taking into account the different QoS (quality of service) requirements and the channel conditions for each user; according to the proposed relay selection scheme, adopt a direct transfer mode, or a user-relaying transfer mode by using AF (amplify-and-forward) strategy, in order to reduce the outage probability of source node and minimize the effects on collaborative users as well. Finally, from queuing theory point of view, according to the system equilibrium equation, we analyze traffic queue performances of source and relay nodes and evaluate the proposed relay selection scheme compared with traditional schemes. Simulation results show that the proposed relay selection scheme can significantly improve the transmission performance of the source node, while reduce queue length of the relay nodes by more than 30% when average SNR is small, and achieve a better cooperative diversity gain.
Novel Relay Selection Algorithms for Machine-to-Machine Communications with Static RF Interface Usage

Monireh Allah Gholi Ghasri,Ali Mohammad Afshin Hemmatyar,Siavash Bayat,Mostafa Mahdieh

DOI: https://doi.org/10.48550/arXiv.1908.10351

2019-08-25

Networking and Internet Architecture

Abstract:Machine-to-Machine (M2M) communications have been introduced to improve the communication capacity in dense wireless networks. One of the most important concerns for network designers is maintaining the high performance of the network when the quality of connections between sources and their destinations is poor. Thus the careful selection of relays between data sources and their destinations is a very important issue. The possibility of simultaneous use of different Radio Frequency (RF) interfaces for transmitting data, which communication devices are equipped with them, can increase the capacity of data transmission over the network. In this paper, two novel M2M relay selection algorithms are proposed, named as Optimal Relay Selection Algorithm (ORSA) and Matching based Relay Selection Algorithm (MRSA). ORSA is a centralized algorithm for the optimal selection of relays by transforming the main problem to a k-cardinality assignment problem that can be solved using the Hungarian algorithm. MRSA is a distributed algorithm that leverages concepts from matching theory to provide a stable solution for the relay selection problem. In both proposed algorithms static RF interfaces usage is applied to enable simultaneous use of different interfaces for data transmission. The simulations show that ORSA is optimally solving the relay selection problem. MRSA has an optimal stable result, that when there is no restriction on the number of channels, is only about 1% lower than ORSA. Besides, MRSA provides better results than direct transmission Without any Relay Selection Algorithm (WRSA) and Random Relay Selection Algorithm (RRSA), about 15% and 98%, respectively.
Energy-Neutral and QoS-Aware Protocol in Wireless Sensor Networks for Health Monitoring of Hoisting Systems

Houlian Wang,Gongbo Zhou,Laksh Bhatia,Zhencai Zhu,Wei Li,Julie A. McCann

DOI: https://doi.org/10.1109/tii.2020.2969218

IF: 12.3

2020-08-01

IEEE Transactions on Industrial Informatics

Abstract:Hoisting equipment is core to many industrial systems and, therefore, their state of health significantly affects production lines and personnel safety; this is especially important in environments such as coal mines. The health of the hoisting system can be estimated by deploying energy harvesting wireless sensor nodes that monitor the drum surface stress. In this network of sensor devices, it is very costly to send highly sampled data as it causes radio congestion and consumes energy. However, from our experience of sensing hoist systems, we note that the data observed at the upper surface of the hoist are significantly more indicative of the state of health of the whole system, compared with data sensed at the lower surface. Therefore, we need to take advantage of this to optimize the communications of sensor nodes. However, scarce energy can be collected for these devices from the hoist itself, along with the prioritized Quality of Service (QoS) requirements (throughput, delay) of monitoring signals, raises important challenges for energy management. In this article, we use Lyapunov optimization techniques and propose an energy-neutral and QoS-aware protocol (EQP), including duty cycling and network scheduling to solve it. Extensive simulations show that the EQP helps sensor nodes realize consecutive monitoring, and achieve more than 38% utility gain compared with existing strategies.

automation & control systems,computer science, interdisciplinary applications,engineering, industrial
Cognitive IoT based Health Monitoring Scheme using Non-Orthogonal Multiple Access

Ashiqur Rahman Rahul,Saifur Rahman Sabuj,Majumder Fazle Haider,Shakil Ahmed

DOI: https://doi.org/10.48550/arXiv.2007.10607

2020-07-21

Abstract:It has become very essential to address the limited spectrum capacity and their efficient utilization to support the increasing number of Internet of Things devices. When it comes to medical infrastructure, it becomes very imperative for medical devices to communicate with the base station. In such situations, communication over the wireless medium must provide optimized throughput (data rate) with effectual energy usage, which will ensure precise medical feedback by the responsible staff. Taking into account, it is necessary to operate wireless communication precisely at a higher frequency with more substantial bandwidth and low latency. Cognitive Radio (CR) is traditionally a viable choice, where it identifies and utilizes the vacant spectrum, thus maximizing the primary user's capacity and achieving spectral efficiency. To ensure such outcomes, the Non-Orthogonal Multiple Access (NOMA) techniques have proven to deliver an effective solution to the increasing number of devices with unimpaired performance, especially when the communication shifts towards a higher frequency band such as the mmWave band. In this chapter, IoT based CR network in uplink communication is proposed alongside employing NOMA techniques for optimal throughput, and energy efficiency for a medical infrastructure. Numerical results show that effectual throughput and energy efficiency for a High Reliable Communication (HRC) device and Moderate Reliable Communication (MRC) device improve over 83.13% and 73.95%, respectively and their corresponding energy efficacy values show vast improvement (83.11% and 73.96% respectively). Likewise, for interference case both the throughput and the energy efficiency improve approximately over 93% for all devices.

Signal Processing,Networking and Internet Architecture
Wireless energy and information transfer in networks with hybrid ARQ

Mehdi Salehi Heydar Abad,Ozgur Ercetin,Tamer Elbatt,Mohammed Nafie

DOI: https://doi.org/10.48550/arXiv.1902.04568

2019-02-12

Abstract:In this paper, we consider a class of wireless powered communication devices using hybrid automatic repeat request (HARQ) protocol to ensure reliable communications. In particular, we analyze the trade-off between accumulating mutual information and harvesting RF energy at the receiver of a point-to-point link over a time-varying independent and identically distributed (i.i.d.) channel. The transmitter is assumed to have a constant energy source while the receiver relies, solely, on the RF energy harvested from the received signal. At each time slot, the incoming RF signal is split between information accumulation and energy accumulation with the objective of minimizing the expected number of re-transmissions. A major finding of this work is that the optimal policy minimizing the expected number of re-transmissions utilizes the incoming RF signal to either exclusively harvest energy or to accumulate mutual information. This finding enables achieving an optimal solution in feasible time by converting a two dimensional uncountable state Markov decision process (MDP) with continuous action space into a countable state MDP with binary decision space.

Performance,Networking and Internet Architecture

Evaluation of factors controlling net photosynthetic rate in Scots pine seedlings under field conditions without water stress

Pervasive Health Monitoring Based on Internet of Things: Two Case Studies

BER-based Power Scheduling in Wireless Sensor Networks

Modeling and Analysis of Energy Efficiency and Interference for Cellular Relay Deployment

Power-Aware Cooperative Relay Selection Strategies in Wireless Ad Hoc Networks.

Performance Optimization of Energy Efficient Semantic Communications over Wireless Networks

Privacy-Preserving Wireless Sensor Networks for E-Healthcare Applications

Collaborative Beamforming and Dirty Paper Coding Assisted Transmission Strategy for E-Health Wireless Sensor Networks.

A Network-based System Architecture for Remote Medical Applications

Towards the Internet of Medical Things for Real-Time Health Monitoring over Wi-Fi

Medical Grade QoS Improvement Using IEEE802.11e WLAN Protocol

Best Relay Selection Strategy in Cooperative Spectrum Sharing Framework with Mobile-Based End User

QoS-Aware Buffer-Aided Relaying Implant WBAN for Healthcare IoT: Opportunities and Challenges

A New Optimal Relay Selection Strategy for the Coincident Multi-User Access.

Protocol Wireless Medical Sensor Networks in IoT for the Efficiency of Healthcare

Energy Efficiency Analysis of Relay-Assisted Cellular Networks

Channel and Traffic Status Aware Relay Selection and Traffic Queue Analysis in Wireless User-Relaying Networks.

Novel Relay Selection Algorithms for Machine-to-Machine Communications with Static RF Interface Usage

Energy-Neutral and QoS-Aware Protocol in Wireless Sensor Networks for Health Monitoring of Hoisting Systems

Cognitive IoT based Health Monitoring Scheme using Non-Orthogonal Multiple Access

Wireless energy and information transfer in networks with hybrid ARQ