Abstract:Determining a desirable strain rate-temperature range for superplasticity and elongation-to-failure are critical concerns during the prediction of superplastic forming processes in α + β titanium-based alloys. This paper studies the superplastic deformation behaviour and related microstructural evolution of conventionally processed sheets of Ti-6Al-4V alloy in a strain rate range of 10-5-10-2 s-1 and a temperature range of 750-900 °C. Thermo-Calc calculation and microstructural analysis of the as-annealed samples were done in order to determine the α/β ratio and the grain size of the phases prior to the superplastic deformation. The strain rate ranges, which corresponds to the superplastic behaviour with strain rate sensitivity index m ˃ 0.3, are identified by step-by-step decreasing strain rate tests for various temperatures. Results of the uniaxial isothermal tensile tests at a constant strain rate range of 3 × 10-4-3 × 10-3 s-1 and a temperature range of 800-900 °C are presented and discussed. The experimental stress-strain data are utilized to construct constitutive models, with the purpose of predicting the flow stress behaviour of this alloy. The cross-validation approach is used to examine the predictability of the constructed models. The models exhibit excellent approximation and predictability of the flow behaviour of the studied alloy. Strain-induced changes in the grain structure are investigated by scanning electron microscopy and electron backscattered diffraction. Particular attention is paid to the comparison between the deformation behaviour and the microstructural evolution at 825 °C and 875 °C. Maximum elongation-to-failure of 635% and low residual cavitation were observed after a strain of 1.8 at 1 × 10-3 s-1 and 825 °C. This temperature provides 23 ± 4% β phase and a highly stable grain structure of both phases. The optimum deformation temperature obtained for the studied alloy is 825 °C, which is considered a comparatively low deformation temperature for the studied Ti-6Al-4V alloy.

Superelastic behavior of a β-type titanium alloy

Room Temperature Deformation and Superelastic Behavior of TLM Titanium Alloy Under Different Solution Conditions

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Tailoring deformation and superelastic behaviors of beta-type Ti-Nb-Mn-Sn alloys.

The characterization of shape memory effect for low elastic modulus biomedical β-type titanium alloy

Low-temperature superplastic behavior of beta titanium alloy

Effect Of Aging On Superelastic Behaviors Of A Metastable Beta Ti-Mo-Based Alloy

Shape Memory Effect And Superelastic Property Of A Novel Ti-3zr-2sn-3mo-15nb Alloy

Effect of Aging on Superelastic Behaviors of a Metastable β Ti-Mo-based alloy

Effects of thermomechanical process on the microstructure and mechanical properties of a fully martensitic titanium-based biomedical alloy

Superelasticity over a wide temperature range in metastable β-Ti shape memory alloys

Superelastic and Shape Memory Properties of Ti X Nb3Zr2Ta Alloys

Tensile Deformation Behavior of a Solution-Treated Ti–33Nb–4Sn Alloy with a Dual Β and Α" Phases under Cyclic Loading-Unloading

Superplasticity of Ti-6Al-4V Titanium Alloy: Microstructure Evolution and Constitutive Modelling

Stable and Large Superelasticity and Elastocaloric Effect in Nanocrystalline Ti-44Ni-5Cu-1Al (at%) Alloy

Deformation behavior of metastable β-type Ti-25Nb-2Mo-4Sn alloy for biomedical applications

Study of Low-Temperature Thermomechanical Behavior of the Ti–18Zr–15Nb Superelastic Alloy under Different Temperature-Rate Conditions

Superelastic and shape memory properties of TixNb3Zr2Ta alloys

Dynamic mechanical behavior, microstructure evolution, and restoration mechanism of a β‐Ti alloy during hot compression deformation

Meso-scopically Homogeneous Superelastic Transformation and Related Elastocaloric Effect in a Textured Ti-based Shape Memory Alloy

Superelasticity and Microstructure of Ti 50+x Pd 30 Ni 20-X High-Temperature Shape Memory Alloys