Abstract:Full-scale tidal turbines deployed in tidal channels are subjected to complex flow due to the effects of local bathymetry and coastline shape which modify the flow directionality, shear, twist and speed of the underlying tidally forced flow. In response to these effects, the wake of an operational tidal turbine will vary spatially and temporally. In order to predict wake form, which is a key step for scaling up tidal energy as developments move from single devices to arrays, we have developed and demonstrated an open source turbine-embedded regional three-dimensional (3D) hydrodynamic model for power and wake prediction. Simulation outputs have been validated against in-situ measurements acquired via ADCPs positioned downstream of and adjacent to the rotor-plane of an operating tidal turbine. Model predictive performance is parameterised by the relative difference between modelled and measured power-weighted rotor averaged velocity using speed binning and temporal-averaging. In the absence of the turbine representation, the difference between model and measurement for ebb and flood was found to be 0.81% and 1.04% respectively at the flow speed of 2.5 m/s. With the turbine represented as an actuator disc in the model, the averaged error of the velocity profiles in the wake is 4.4% and 5.2% at ADCP locations that are 3.7D and 6.2D downstream of the rotor plane during ebb. The model has been designed for use on moderately-priced workstations and the promising results, in terms of capturing key 3D flow features and predictions of wake velocity deficits, is a starting point for further development and may provide baseline data for alternative (e.g., higher fidelity, slower performance, or lower fidelity including 2D models with much faster performance).

Actuator line method flow structures and morphology interaction around a monopile-supported tidal stream turbine using the actuator line–Sediment transport coupling simulation

Study on the Performance of a 300W Counter-Rotating Type Horizontal Axis Tidal Turbine

Proposal of actuator line-immersed boundary coupling model for tidal stream turbine modeling with hydrodynamics upon scouring morphology

Hydrodynamic Analysis of Tidal Current Turbine under Water-Sediment Conditions

Fully Coupled Hydrodynamic–Mooring–Motion Response Model for Semi-Submersible Tidal Stream Turbine Based on Actuation Line Method

Design and Test of a 600-Kw Horizontal-Axis Tidal Current Turbine

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Modelling hydrodynamic processes in tidal stream energy extraction

Investigation of the Performance of a Stand-Alone Horizontal Axis Tidal Current Turbine Based on in Situ Experiment

Research on Wake Field Characteristics and Support Structure Interference of Horizontal Axis Tidal Stream Turbine

Wake Structure and Mechanical Energy Transformation Induced by a Horizontal Axis Tidal Stream Turbine

Performance prediction of a prototype tidal power turbine by using a suitable numerical model

Design and Tests of a Marine Current Turbine in Low Flow Velocity

Nested numerical simulation of multi-scale flow characteristics around monopile foundation of offshore wind farm at Weihai coastal water, China

Numerical Investigation of the Erosion Behavior in Blades of Tidal Current Turbine

Validation of tidal turbine wake simulations using an open regional-scale 3D model against 1MW machine and site measurements

Numerical Model Simulation of Island-Headland Induced Eddies in a Site for Tidal Current Energy Extraction

High-resolution 3D Hydrodynamic Modeling and Comprehensive Assessment of Tidal Current Energy Resources

Experimental investigation of the seabed topography effects on tidal stream turbine behavior and wake characteristics

Modelling Tidal Current Energy Extraction In Large Area Using A Three-Dimensional Estuary Model

Time development of live-bed scour around an offshore-wind monopile under large current-wave ratio