Abstract:Heavy metal wastewater poses a serious threat to the environment. In comparison to the existing methods of chemical precipitation, ion exchange and carbon adsorption, biosorption is an attractive alternative for the recovery of heavy metals from industrial effluents. However, nickel ion, different from other heavy metal ions, is a more recalcitrant pollutant and has low affinity to many metal tolerant microorganisms. In this study, Escherichia coli JM109 was genetically engineered to simultaneously express a Ni2+ transport system (the product of nixA gene) andoverexpress metallothionein (MT). NixA protein has a high affinity for Ni2+, and metallothioneins (MTs) are capable of binding a variety of heavy metals including Ni2+ . The Ni2+ bioaccumulation performance of the genetically engineered E. coli JM109 was evaluated. Time-course test showed that the bioaccumulation rate was rapid, and 95% of the accumulation was achieved within the first 10 minutes. The maximum Ni2+ bioaccumulation by genetically engineered E. coli cells was dramatically increased from 1.54 mg/g to 10.11mg/g, a more than five-fold increase than that of the original E. coli strain. The isotherm was of Langmuir type. Within the tested pH range (pH 4-10), the engineered cells displayed more resistance to pH variation, retaining up to 80% of the Ni2+ binding capacity at pH 4, while the original E. coli host cells lost 80% of Ni2+ binding capacity at pH 4. The presence of Na+ and Ca2+ affected Ni2+ bioaccumulation, but the effects were not serious, as 71% and 66% of the Ni2+ binding capacities were retained respectively at the concentrations of 1000 mg/L Na+ and 1000 mg/L Ca2+ . However, Mg2+ exerted a severe adverse effect on Ni2+ bioaccumulation, 83% of Ni2+ accumulating capacity was lost when Mg2+ concentration reached 200 mg/L. The effects of different kinds of heavy metals on Ni2+ accumulating were different. The genetically engineered E. coli cell lost less than 45% of its Ni2+ bioaccumulation activity in the presence of 50 mg/L lead or cadmium, 66% in the presence of 25mg/L mercury and 84% in the presence of 40 mg/L copper. The presence of glucose did not improve Ni2+ uptake. Our study suggests that the genetically engineered E. coli JM109 has potential application for effective and efficient recovery of nickel from aqueous solutions.

Adsorptive removal of Ni(II) using nickel-resistant dead S. cerevisiae AJ208

Removal of Aqueous Ni(Ii) with Carbonized Leaf Powder: Kinetics and Equilibrium

Green removal of Ni(II) from synthetic and industrial wastewater using Saccharomyces cerevisiae AJ208 and phytotoxicity assessment

Effect of complex nutrients, amino acids, vitamins on Ni(II) biosorption from aqueous solution by Ni(II) resistant Saccharomyces cerevisiae AJ208

Ni(II) and Pb(II) Removal Using Bacterial Cellulose Membranes

[Uptake of Nickel from Industrial Wastewater by Genetically Engineered Escherichia Coli JM109].

Metal Removal from Nickel-Containing Effluents Using Mineral–Organic Hybrid Adsorbent

Characteristics and Mechanisms of Ni(II) Removal from Aqueous Solution by Chinese Loess

Removal of Ni(II) ions from wastewater by ion exchange resin: Process optimization using response surface methodology and ensemble machine learning techniques

Nickel ion removal from aqueous solutions through the adsorption process: a review

Ni2+ removal by ion exchange resins and activated carbon: a benchtop NMR study

A hybrid system for Nickel ions removal from synthesized wastewater using adsorption assisted with electrocoagulation

Efficient and Rapid Removal of Nickel Ions from Electroplating Wastewater Using Micro-/Nanostructured Biogenic Manganese Oxide Composite

Efficient Removal of Nickel from Wastewater Using Copper Sulfate-Ammonia Complex Modified Activated Carbon: Adsorption Performance and Mechanism

Enhanced Ni(II) Removal from Wastewater Using Novel Molecular Sieve-Based Composites

Mn3O4–MnOOH nanocomposites for the adsorption-based removal of nickel ions from wastewater

Pseudomonas stutzeri Immobilized Sawdust Biochar for Nickel Ion Removal

Azadirachta indica leaf powder as a biosorbent for Ni(II) in aqueous medium

Development of a reduced-graphene-oxide based superparamagnetic nanocomposite for the removal of nickel (II) from an aqueous medium via a fluorescence sensor platform

Continuous fixed‐bed column adsorption of nickel (II) using recyclable three‐dimensional cellulose nanocrystals‐hydrogel: Bed depth service time, Thomas, Adams–Bohart, and Yoon–Nelson modelling

Superhigh adsorption of nickel from electroplating wastewater by raw and calcined electroplating sludge waste