Hybrid air-bulk multi-pass cell compressor for high pulse energies with full spatio-temporal characterization

Alan Omar,Martin Hoffmann,Geoffrey Galle,FranÇOis Sylla,Clara J. Saraceno

2024-02-09

Abstract:Multi-pass cell (MPC) compressors have proven to be the method of choice for compression of high average power long-pulse Yb lasers. Yet, generating sub-30 fs pulses at high pulse energy with compact and simple components remains a challenge. This work demonstrates an efficient and cost-effective approach for nonlinear pulse compression at high pulse energy using a hybrid air-bulk MPC. By carefully balancing the relative nonlinear contributions of ambient air and fused silica, we achieve strong spectral broadening without dispersion engineering or pressure-control inside the cell at 400 uJ pulse energy. In this way, we compress pulses from 220 fs to 27 fs at 40.3 W of average power (100 kHz repetition rate), enhancing the peak power from 1.6 GW to 10.2 GW while maintaining 78% of the energy within the main pulse. Our approach combines the strengths of gas-filled and bulk compression schemes and exhibits excellent overall optical transmission (91%) and spectral uniformity. Moreover, we utilize the INSIGHT technique to investigate spatio-temporal couplings and geometrical aberrations of the compressed pulse. Our results demonstrate remarkable temporal homogeneity, with an average Strehl ratio of 0.97 consistently observed throughout the entire spectral profile. Additionally, all spectrally-integrated Zernike coefficients for geometrical aberrations maintain values below 0.02{\lambda}.

Optics

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is: How to achieve efficient and cost - effective nonlinear pulse compression using a hybrid air - bulk multi - pass cell (MPC) without using a pressure - control cavity, so as to generate sub - 30 - femtosecond ultrashort pulses at high pulse energy. Specifically, the author hopes to achieve strong spectral broadening and high - peak - power enhancement by optimizing the relative nonlinear contributions in ambient air and fused silica while maintaining simplicity and compactness.

### Summary of Main Problems:
1. **Efficient Pulse Compression**: How to achieve efficient nonlinear pulse compression at high pulse energy (400 µJ).
2. **Compactness and Simplicity**: Design a compact and simple device and avoid a complex pressure - control system.
3. **High - Peak Power**: Significantly increase the peak power while maintaining high optical - transmission efficiency.
4. **Beam - Quality Maintenance**: Ensure that the compressed pulse has good spatio - temporal characteristics and geometric aberrations to maintain a high - quality beam.

### Overview of Solutions:
- **Hybrid Air - Bulk MPC**: Combines the advantages of gas - filling and bulk - compression schemes, using ambient air and fused silica as nonlinear media.
- **Optimizing Nonlinear Contributions**: By precisely controlling the nonlinear effects in air and fused silica, effective spectral broadening is achieved.
- **No Need for Pressure Control**: Avoids a complex pressure - control system and simplifies the experimental setup.
- **High Optical - Transmission Efficiency**: Achieves an overall optical - transmission efficiency and spectral uniformity of over 91%.

### Experimental Results:
- **Pulse Compression**: Compresses an initial 220 - fs pulse to 27 fs, with a compression ratio of 8.1 times.
- **Peak - Power Increase**: The peak power is increased from 1.6 GW to 10.2 GW, enhanced by 6.4 times.
- **Beam Quality**: Maintains 78% of the main - pulse energy, and the time uniformity and extremely low geometric aberration of the compressed pulse are verified by the INSIGHT technique.

Through these methods, the author demonstrates the possibility of achieving efficient, compact, and low - cost nonlinear pulse compression at high pulse energy, providing a new research direction for future high - power laser systems.