Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Polariton microfluidics for nonreciprocal dragging and reconfigurable shaping of polaritons

Polarization Control by Using Anisotropic 3-D Chiral Structures

Inverse Design of Polaritonic Devices

Manipulating topological transformations of polar structures through real-time observation of the dynamic polarization evolution

Monolithically Structured van der Waals Materials for Volume-Polariton Refraction and Focusing

Steering and Cloaking of Hyperbolic Polaritons at Deep-Subwavelength Scales

Tunable Topological Polaritons by Dispersion Tailoring of an Active Metasurface

Metamaterial‐enabled Fully On‐Chip Polarization‐Handling Devices

Reconfigurable hyperbolic polaritonics with correlated oxide metasurfaces

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

High-efficiency in situ amplitude and phase control of infrared light using topological polaritons

On‐Demand Dynamic Polarization Meta‐transformer

Advances in polaritonics based on near-field optical imaging technique

Plasmonic Route to Reconfigurable Polarization Optics

Versatile Polarization Generation and Manipulation Using Dielectric Metasurfaces

Non-reciprocal Polarization Rotation Using Dynamic Refractive Index Modulation.

Polarization-Independent Isotropic Nonlocal Metasurfaces with Wavelength-Controlled Functionality

Topologically reconfigurable magnetic polaritons

Polaritonic Manipulation Based On The Spin-Selective Optical Stark Effect In The Ws2 And Tamm Plasmon Hybrid Structure

Optical polarization manipulations with anisotropic nanostructures

Polarization-dependent reconfigurable light field manipulation by liquid-immersion metasurface