Abstract:Abstract The Vector Electric Field Investigation (VEFI) on the C/NOFS satellite comprises a suite of sensors controlled by one central electronics box. The primary measurement consists of a vector DC and AC electric field detector which extends spherical sensors with embedded pre-amps at the ends of six, 9.5-m booms forming three orthogonal detectors with baselines of 20 m tip-to-tip each. The primary VEFI measurement is the DC electric field at 16 vectors/sec with an accuracy of 0.5 mV/m. The electric field receiver also measures the broad spectra of irregularities associated with equatorial spread-F and related ionospheric processes that create the scintillations responsible for the communication and navigation outages for which the C/NOFS mission is designed to understand and predict. The AC electric field measurements range from ELF to HF frequencies. VEFI includes a flux-gate magnetometer providing DC measurements at 1 vector/sec and AC-coupled measurements at 16 vector/sec, as well as a fast, fixed-bias Langmuir probe that serves as the input signal to trigger the VEFI burst memory collection of high time resolution wave data when plasma density depletions are encountered in the low latitude nighttime ionosphere. A bi-directional optical lightning detector designed by the University of Washington (UW) provides continuous average lightning counts at different irradiance levels as well as high time resolution optical lightning emissions captured in the burst memory. The VEFI central electronics box receives inputs from all of the sensors and includes a configurable burst memory with 1–8 channels at sample rates as high as 32 ks/s per channel. The VEFI instrument is thus one experiment with many sensors. All of the instruments were designed, built, and tested at the NASA/Goddard Space Flight Center with the exception of the lightning detector which was designed at UW. The entire VEFI instrument was delivered on budget in less than 2 years. VEFI included a number of technical advances and innovative features described in this article. These include: (1) Two independent sets of 3-axis, orthogonal electric field double probes; (2) Motor-driven, pre-formed cylinder booms housing signal wires that feed pre-amps within tip-mounted spherical sensors; (3) Extended shadow equalizers (2.5 times the sphere diameter) to mitigate photoelectron shadow mismatch for sun angles along the boom directions, particularly important at sunrise/sunset for a low inclination satellite; (4) DC-coupled electric field channels with “boosted” or pre-emphasized amplitude response at ELF frequencies; (5) Miniature multi-channel spectrum analyzers using hybrid technology; (6) Dual-channel optical lightning detector with on-board comparators and counters for 7 irradiance levels with high-time-resolution data capture; (7) Spherical Langmuir probe with Titanium Nitride-coated sensor element and guard; (8) Selectable data rates including 200 kbps (fast), 20 kbps (nominal), and 2 kbps (low for real-time TDRSS communication); and (9) Highly configurable burst memory with selectable channels, sample rates and number, duration, and precursor length of bursts, chosen based on best triggering algorithm “score”. This paper describes the various sensors that constitute the VEFI experiment suite and discusses their operation during the C/NOFS mission. Examples of data are included to illustrate the performance of the different sensors in space.

Characterization and ground calibration of the Electric Field Detector aboard the CSES-02/LIMADOU mission

Scientific Goals and In-orbit Performance of the High-energy Particle Detector on Board the CSES

The electronics of the HEPD of the CSES experiment

Control and data acquisition software of the high‐energy particle detector on board the China Seismo‐Electromagnetic Satellite space mission

The Scintillation Counters of the High-Energy Particle Detector of the China Seismo-Electromagnetic (CSES-02) Satellite

Modeling and Performance of Contact-Free Discharge Systems for Space Inertial Sensors

Calibration and testing of the JEM-EUSO detectors using stars observed in the UV band

Characterization of avalanche photodiodes (APDs) for the CUbesat Solar Polarimeter (CUSP) mission

The Vector Electric Field Investigation (VEFI) on the C/NOFS Satellite

Energetic Electron Detection Packages on Board Chinese Navigation Satellites in MEO

Retrospective Study on Seismic Ionospheric Anomalies Based on Five-Year Observations from CSES

FY-3E Satellite Plasma Analyzer

Design and Performance Study of the LEPD Silicon Tracker Onboard the CSES Satellite

Design of Electronics of LEPD Principle Prototype Onboard the CEMES Satellite

Calibration of Electric Field Data of DEMETER Satellite

The CELESTA CubeSat In-Flight Radiation Measurements and their Comparison with Ground Facilities Predictions

Calibration Test for Low Energy Ion Spectrometer Onboard of Geostationary Satellites

Ground Calibration and In-Flight Performance of the Low Energy Particle Analyzer on FY-4B

An Improved In-Flight Calibration Scheme for CSES Magnetic Field Data

Electromagnetic Characterization of Lunar Dust Simulants

Extensive testing of Schottky CdTe detectors for the ECLAIRs X-Gamma-ray Camera on board the SVOM mission