Abstract:In this paper, we investigate the rapid stabilization of N-layer Timoshenko composite beams with anti-damping and anti-stiffness at the uncontrolled boundaries. The problem of stabilization for a two-layer composite beam has been previously studied by transforming the model into a 1-D hyperbolic PIDE-ODE form and then applying backstepping to this new system. In principle this approach is generalizable to any number of layers. However, when some of the layers have the same physical properties (as e.g. in lamination of repeated layers), the approach leads to isotachic hyperbolic PDEs (i.e. where some states have the same transport speed). This particular yet physical and interesting case has not received much attention beyond a few remarks in the early hyperbolic design. Thus, this work starts by extending the theory of backstepping control of (m + n) hyperbolic PIDEs and m ODEs to blocks of isotachic states, leading to a block backstepping design. Then, returning to multilayer Timoshenko beams, the Riemann transformation is used to transform the states of N-layer Timoshenko beams into a 1-D hyperbolic PIDE-ODE system. The block backstepping method is then applied to this model, obtaining closed-loop stability of the origin in the L2 sense. An arbitrarily rapid convergence rate can be obtained by adjusting control parameters. Finally, numerical simulations are presented corroborating the theoretical developments.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the rapid stabilization problem of multi - layer Timoshenko composite beams under anti - damping and anti - stiffness conditions at the uncontrolled boundaries. Specifically, the paper focuses on how to design a boundary controller so that the N - layer Timoshenko composite beam system can achieve an arbitrarily fast decay rate and ensure the stability of the system. The main contribution of the paper lies in extending the traditional backstepping method to deal with hyperbolic PDE systems with the same transmission speed (i.e., isotachic), thus solving the situation where some layers in the multi - layer beam have the same physical properties.
### Background of the Paper
Multi - layer Timoshenko composite beams are widely used in aerospace, mechanical design, civil engineering, electronics and other fields. These beams are usually composed of multiple layers of materials, and each layer is connected by an adhesive. However, due to the coupling effect between the layers, especially in the case of anti - damping or anti - stiffness at the uncontrolled boundaries, it will lead to vibration problems and even delamination of the system. Therefore, it is particularly important to design an effective feedback controller to stabilize the equilibrium point of the system.
### Main Challenges
1. **Complex Mathematical Model**: The mathematical model of the N - layer Timoshenko composite beam is very complex, involving the coupling of multiple partial differential equations and ordinary differential equations.
2. **Anti - Damping and Anti - Stiffness**: The anti - damping and anti - stiffness conditions at the uncontrolled boundaries may lead to the instability of the system.
3. **Rapid Stabilization**: It is not only necessary to achieve the stability of the system, but also be able to set an arbitrarily fast decay rate.
### Solutions
The paper proposes the following solutions:
1. **Riemann Transformation**: First, use the Riemann transformation to convert the N - layer Timoshenko composite beam system into a one - dimensional hyperbolic PIDE - ODE system.
2. **Block Backstepping Design**: For the isotachic states with the same transmission speed, a block backstepping design method is introduced, and the coupling between these states is eliminated through a diagonalization transformation.
3. **Controller Design**: Based on the above - mentioned transformation, a boundary controller is designed, which can achieve the exponential stability of the system and can arbitrarily set the convergence rate.
### Main Results
The paper proves that under an appropriate control law, the system can achieve exponential stability in the sense of the L2 norm, and an arbitrarily fast convergence rate can be obtained by adjusting the control parameters. Numerical simulations verify the effectiveness of the theoretical results.
### Numerical Simulation
The paper shows the control effect through a specific numerical example. For a two - layer Timoshenko composite beam system, the state variables of the system diverge over time in the initial state (see Figure 2). After applying the designed controller, the state variables of the system quickly converge to zero (see Figure 3).
### Conclusion
The paper successfully solves the rapid stabilization problem of multi - layer Timoshenko composite beams under anti - damping and anti - stiffness conditions at the uncontrolled boundaries. By extending the traditional backstepping method, it deals with the special situation of isotachic systems and provides new ideas and methods for the control design of multi - layer composite beams.