Investigation of Helicopter Rotor Aerodynamic Characteristics in Axial Descent with Viscous Vortex Particle Method
Zeming Gao,Liu,Tianqi Wang,Xueming Shao,Lifang Zeng
DOI: https://doi.org/10.1007/978-981-97-3998-1_121
2024-01-01
Abstract:In the present study, numerical simulations of helicopter rotor operating in vertical descent flight conditions are performed to investigate the effects of descent rate on the aerodynamic performance, axial velocity flowfield, and vortex field characteristics using the viscous vortex particle method. The rotor will enter the vortex ring state (VRS) when the descent speed approaches the hovering induced velocity, where the rotor lift loss and power loss reach the maximum value of 25% and 48.6%, respectively, and the effects of VRS on the blade tip (r/R = 0.96) are more serious than those on the inner blade (r/R = 0.68). The flow states for the helicopter rotor can be classified into pre-VRS, incipient VRS, fully developed VRS and windmill-like flow state, depending on the structure of vortex. With the increase of the descent rate, the axial downwash area of the rotor gradually becomes smaller due to the effect of wake compression, and when the descent rate is 1.0, the rotor is completely enveloped by a low-pressure area, leading to a sudden loss in its lift, which indicates the emergence of a fully developed VRS. As the descent rate further increases to 2.0, the rotor enters a windmill-like state, and the air flow completely passes through the rotor disk plane. From the perspective of the vortex ring formation, the flow field below the rotor mainly presents helicoidal structure in the pre-VRS. When the flow enters the VRS, the helicoidal wake of the rotor breaks down into a toroidal structure near the rotor tip, and a large recirculation zone is formed above the rotor disk. During the windmill-like flow state, the vortex dominated by the incoming flow is concentrated above the rotor disk, showing a relatively stable vortex structure.