Integrated Sensing and Communication enabled Sensing Base Station: System Design, Beamforming, Interference Cancellation and Performance Analysis

Wangjun Jiang,Zhiqing Wei,Zhiyong Feng,Xu Chen

2023-10-12

Abstract:This paper studies the sensing base station (SBS) that has great potential to improve the safety of vehicles and pedestrians on roads. It can detect the targets on the road with communication signals using the integrated sensing and communication (ISAC) technique. Compared with vehicle-mounted radar, SBS has a better sensing field due to its higher deployment position, which can help solve the problem of sensing blind areas. In this paper, key technologies of SBS are studied, including the beamforming algorithm, beam scanning scheme, and interference cancellation algorithm. To transmit and receive ISAC signals simultaneously, a double-coupling antenna array is applied. The free detection beam and directional communication beam are proposed for joint communication and sensing to meet the requirements of beamwidth and pointing directions. The joint time-space-frequency domain division multiple access algorithm is proposed to cancel the interference of SBS, including multiuser interference and duplex interference between sensing and communication. Finally, the sensing and communication performance of SBS under the industrial scientific medical power limitation is analyzed and simulated. Simulation results show that the communication rate of SBS can reach over 100 Mbps and the range of sensing and communication can reach about 500 m.

Numerical Analysis

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the safety of road vehicles and pedestrians by designing a Sensing Base Station (SBS) with Integrated Sensing and Communication (ISAC) technology. Specifically, the paper focuses on the following aspects:

1. **Sensing blind - zone problem**: Traditional vehicle - mounted radars have sensing blind zones due to their low deployment positions. However, since the SBS is deployed at a higher position, it can effectively solve this problem and provide a broader sensing field of view.

2. **Multi - user interference and duplex interference**: When the SBS performs sensing and communication simultaneously, it faces multi - user interference and duplex interference between sensing and communication. The paper proposes a Joint Time - Space - Frequency - Domain Multiple Access (TSF - DMA) algorithm to eliminate these interferences.

3. **Beamforming and scanning schemes**: In order to meet the different requirements of sensing and communication for beam width and pointing direction, the paper proposes an improved beamforming algorithm, optimizes the weight vectors of the Free Detection Beam (FDB) and the Directional Communication Beam (DCB), and designs the scanning mode of the FDB.

4. **System performance analysis**: Under the industrial, scientific and medical power limit, the paper analyzes and simulates the sensing and communication performance of the SBS, including communication rate and sensing range.

### Main contributions

1. **System model**: A SBS system model based on ISAC technology is proposed. A dual - coupled antenna array is used to achieve simultaneous transmission and reception of ISAC signals, and key technologies such as antenna array design, beamforming algorithm, beam scanning scheme and interference cancellation algorithm are studied.

2. **Beamforming algorithm**: An improved beamforming algorithm for FDB and DCB is proposed, which solves the sidelobe leakage problem when multiple communication beams work simultaneously and improves the main lobe gain.

3. **Interference cancellation scheme**: A signal frame structure is designed. The duplex interference between sensing and communication is eliminated by time - division multiplexing, and the TSF - DMA algorithm is proposed to eliminate multi - user interference.

4. **Performance analysis and simulation**: The expressions of ranging and velocity estimation accuracy are derived and verified by simulation. It is proved that the communication rate of the SBS system can reach more than 100 Mbps, and the sensing and communication range can reach about 500 meters.

Through these studies, the paper aims to provide technical support for the integration of sensing and communication in future Cooperative - Intelligent Transport Systems (C - ITS), thereby reducing traffic accidents and improving road safety.