Abstract:Electrooxidation is an attractive technique that can be effectively applied for the treatment of persistent organic contaminants, but its implementation in practice is limited by the lack of efficient and low cost anode material that would not lead to the generation of chlorinated by products. Herein, we developed a novel anode based on TiO2 nanotube array NTA coated with Mo-doped MnxOy, and applied it for electrooxidation of persistent organic contaminants. The Ti TiO2 NTA MnxOyMo anode outperformed the commercial Ti IrOxPt anode and effectively oxidized organic contaminants, with a significantly reduced electric energy per order, and avoiding chlorine evolution reaction. Mo doping played a key role in the excellent performance of the synthesized anode as it favored the formation of oxygen vacancies in the host lattice and Mn and Mo species redox couples, which increased the oxidizing power of the anode and ensured its complete stability.

What problem does this paper attempt to address?

The paper attempts to address the issue of how to effectively remove Persistent Organic Contaminants (POCs) during electrochemical water treatment while avoiding the generation of harmful halogenated by-products. Specifically, the researchers developed a novel anode material—a manganese oxide (MnₓOᵧ) coated anode based on titanium dioxide nanotube arrays (TiO₂ NTA) and doped with molybdenum (Mo)—to overcome the high cost, low efficiency, and chlorinated by-products associated with existing commercial anode materials in the removal of POCs. ### Background Issues: 1. **Need for POC Removal**: With climate change, groundwater depletion, and population growth, reliable and safe water resources are becoming increasingly scarce. Traditional water treatment technologies are ineffective at removing emerging organic contaminants such as biocides, pharmaceuticals, and personal care products. 2. **Advantages and Challenges of Electrochemical Water Treatment**: Electrochemical water treatment is a promising technology that can be modular, requires no chemical additives, and operates at ambient temperature and pressure. However, existing commercial anode materials (such as boron-doped diamond BDD and mixed metal oxides MMO) have the following issues: - High cost (e.g., BDD approximately €4200 per square meter, MMO approximately €3000 per square meter). - Tendency to generate harmful by-products like chlorine gas and chlorates during electrolysis. - Requires high current density to generate strong oxidants (such as hydroxyl radicals OH•), which further increases energy consumption. ### Solution: 1. **Novel Anode Material**: Researchers developed a manganese oxide coated anode based on TiO₂ NTA and doped with molybdenum (Ti/TiO₂ NTA–MnₓOᵧ-Mo). This anode material has the following advantages: - **Efficient POC Removal**: Effectively oxidizes various persistent organic contaminants even at low potentials. - **Low Energy Consumption**: Significantly reduces the energy consumption per unit of degradation. - **Avoids Chlorinated By-products**: Does not generate harmful by-products such as chlorine gas, chlorates, or perchlorates. - **Stability**: Molybdenum doping helps form oxygen vacancies and Mn/Mo redox pairs, enhancing the anode's oxidation capability and stability. ### Research Methods: - **Material Synthesis**: MnₓOᵧ and Mo-doped MnₓOᵧ coatings were prepared on TiO₂ NTA by electrodeposition. - **Material Characterization**: Techniques such as Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS) were used to characterize the morphology and chemical states of the materials. - **Electrochemical Performance Testing**: The electrochemical activity and conductivity of the anode were evaluated using Cyclic Voltammetry (CV), Linear Sweep Voltammetry (LSV), and Electrochemical Impedance Spectroscopy (EIS). - **Contaminant Removal Experiments**: The anode's effectiveness in removing various persistent organic contaminants (such as acyclovir, carbamazepine, diclofenac, triclosan, and tramadol) was tested under different potentials and electrolyte conditions. ### Conclusion: The research results indicate that the Ti/TiO₂ NTA–MnₓOᵧ-Mo anode exhibits excellent performance in removing persistent organic contaminants while avoiding the generation of harmful by-products, with low energy consumption and high stability. This finding provides a new direction for the development of electrochemical water treatment technology.

Electrocatalytic removal of persistent organic contaminants at molybdenum doped manganese oxide coated TiO2 nanotube-based anode

Influence of MnOx deposition on TiO2 nanotube arrays for electrooxidation

Manganese oxide coated TiO2 nanotube-based electrode for efficient and selective electrocatalytic sulfide oxidation to colloidal sulfur

Fabrication of sulfur-doped TiO2 nanotube array as a conductive interlayer of PbO2 anode for efficient electrochemical oxidation of organic pollutants

Fabrication of MnO2/TiO2 nano-tube arrays photoelectrode and its enhanced visible light photoelectrocatalytic performance and mechanism

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water.

Molybdenum−Modified Titanium Dioxide Nanotube Arrays as an Efficient Electrode for the Electroreduction of Nitrate to Ammonia

Superior MoTiN and NiMoTiN coating electrode with platinum-like catalytic activity fabricated by plasma electrolytic oxidation

Electrochemical oxidation of reverse osmosis concentrates using enhanced TiO2-NTA/SnO2-Sb anodes with/without PbO2 layer

Molybdenum carbide nanoclusters with ultrafast electron transfer ability promotes molecular oxygen selective electrocatalytic reduction to hydroxyl radicals for pollutant control

Interface engineering on Magnéli Ti 4 O 7 electrodes by doping with waste MOF-recycled N-doped carbon polyhedrons toward efficient electrooxidation of tetracycline

High-efficiency electrocatalytic nitrite-to-ammonia conversion on molybdenum doped cobalt oxide nanoarray at ambient conditions

(Electro)catalytic oxidation of sulfide and recovery of elemental sulfur from sulfide-laden streams

Enhanced degradation of refractory organics in ORR-EO system with a blue TiO2 nanotube array modified Ti-based Ni-Sb co-doped SnO2 anode

MnFe2O4 Nanoparticles Coated on One-Dimensional Carbon Nanowires Derived from Nitrilotriacetic Acid As Efficient Catalysts to Activate Peroxymonosulfate for Moxifloxacin Degradation

Trace Ti3+- and N-codoped TiO2 Nanotube Array Anode for Significantly Enhanced Electrocatalytic Degradation of Tetracycline and Metronidazole

Dual Sites Modulating MoO2 Nanospheres for Synergistically Enhanced Electrocatalysis of Water Oxidation

Stable boron and cobalt co-doped TiO2 nanotubes anode for efficient degradation of organic pollutants

Electrolytic trichloroethene degradation using mixed metal oxide coated titanium mesh electrodes

Sequential Electrocatalysis by Single Molybdenum Atoms/clusters Doped on Carbon Nanotubes for Removing Organic Contaminants from Wastewater

Self-supported Molybdenum Nickel Oxide Catalytic Electrode Designed Via Molecular Cluster-Mediated Electroplating and Electrochemical Activation for an Efficient and Durable Oxygen Evolution Reaction.