Abstract:The phenomena of droplet impact can be encountered in modern applications, including heat exchangers, electronic cooling devices, and internal combustion engines. The underlying mechanisms of two-phase flows, coupled with heat and mass transfer processes, such as evaporation, condensation, and boiling, increase the complexity of physical systems. This requires a thorough investigation of interfacial dynamics associated with temperature gradients and mass transfer phenomena. However, existing studies in the literature mainly focus on droplets impacting liquid films under ambient conditions, neglecting thermal effects. Therefore, the main objective of this work is to evaluate the influence of the liquid film temperature on the droplet impact outcomes, namely splashing and crown dynamics. An experimental facility was designed and adapted to account for both ambient and non-isothermal conditions. The droplet is released from a hypodermic needle until impacting onto the liquid film. The impact surface is positioned above an aluminum block, which acts as a heat source, heating the liquid film by conduction. Water, n-decane, and n-heptane are the fluids considered for the experiments. Study cases include varying the droplet impact velocity and liquid film temperature, encompassing both spreading and splashing regimes for isothermal and non-isothermal conditions. Experimental results show that an increase in the liquid film temperature induces the transition from spreading to splashing regimes across all fluids. Qualitatively, this translates from smooth to irregular crowns due to the formation of cusps in the crown rim. These structures are the main source of secondary atomization, which is promoted by increasing the liquid film temperature. Transitional regimes may display several irregularities, in which splashing is visualized at non-isothermal conditions, followed by the reduction/suppression of the splashing occurrence for higher liquid film temperatures. These require further attention in order to fully comprehend fluid and heat flow, such as Marangoni stresses and local evaporation.

Predicting the Splash of a Drop Impacting a Thin Liquid Film

Predicting the Splash of a Droplet Impinging on Solid Substrates.

Experimental Correlation for Splashing Condition of Droplets on Solid Substrates

Analytical Consideration of Liquid Droplet Impingement on Solid Surfaces

Spreading and Recoil of Drops Impacting a Hydrophobic Surface

Effects of Air on Splashing During a Droplet Impact.

Droplet Splashing on Rough Surfaces

Experimental Study of a Drop Bouncing on a Liquid Surface

Impact of droplet on flowing liquid film: Experimental and numerical determinations

Droplet impact: Viscosity and wettability effects on splashing

Spreading of a viscous drop after impact onto a spherical target

Growth and instability of the liquid rim in the crown splash regime

Impact of Droplets on Liquid Films in the Presence of Surfactant.

Numerical study on dynamics of oblique hollow droplet impact on a liquid film

Miscibility and wettability: how interfacial tension influences droplet impact onto thin wall films

Splashing Morphology And Crown Dynamics Of Single Droplets Impinging Heated Liquid Films

Effects of an immiscible liquid film on an impacting droplet

Phenomenological study and comparison of droplet impact dynamics on a dry surface, thin liquid film, liquid film and shallow pool

Drop Impact on Liquid Surfaces: Formation of Lens and Spherical Drops at the Air-Liquid Interface

Analysis of high-energy drop impact onto deep liquid pool

Dynamics of high-speed micro-drop impact: numerical simulations and experiments at frame-to-frame times below 100 ns.