Abstract:For high transparent materials, the difference among the transmittances of various slabs in different thicknesses is very slight since the index of absorption is rather small. However, the divergence of transmittances is very necessary to provide multiple independent constraints for retrieving spectral intrinsic properties from transmitted data with an acceptable accuracy. A Multi-Layer-Combination (MLC) method in which multiple sheets compose a transmitted combination is proposed to provide obviously different transmittances. In this study, the measurements on MLC slabs of C-plane sapphire were performed between 0.8 and 7.0 mu m from room temperature to 1800 K. For a given total thickness, the measured results show that the stacking structure of multiple layers can obviously diminish the transmittance, but has no influence on the infrared cutoff and infrared border of high transparency. The spectral refractive indexes and absorption indices within 0.8-5 mu m were extracted from transmittance data by minimizing the standard deviation between measurements and predictions. The results indicate that all the properties are wavelength dependent and temperature dependent. Spectral refractive indexes rise regularly with growing temperature and decrease slowly with increasing wavelength. For a researched temperature, the index of absorption levels off in the high transparent interval and climbs steadily in the next spectrum as the wavelength increases. In the tested temperature range of 300-1800 K, the spectral absorption indices rise gradually with increasing temperature. The absorption edge moves forward to the short wavelength infrared from about 3.5 mu m at 300 K to about 2.75 mu m at 1800 K. (C) 2018 Elsevier Ltd. All rights reserved.

Spectrally Sharp Near-Field Thermal Emission: Revealing Some Disagreements between a Casimir-Polder Sensor and Predictions from Far-Field Emittance

Measuring Near-Field Radiative Heat Transfer in a Graphene-SiC Heterostructure

Experimental observations of temperature effects in the near-field regime of the Casimir-Polder interaction

Casimir-Polder forces in the presence of thermally excited surface modes

Simultaneous Single-Peak and Narrowband Thermal Emission Enabled by Hybrid Metal-Polar Dielectric Structures

Selective Reflection Spectroscopy on the UV Third Resonance Line of Cs : Simultaneous Probing of a van der Waals Atom-Surface Interaction Sensitive to Far IR Couplings and of Interatomic Collisions

Narrowband Diffuse Thermal Emitter Based on Surface Phonon Polaritons

Tunable Narrowband Mid-Infrared Thermal Emitter with a Bilayer Cavity Enhanced Tamm Plasmon.

Spectral redshift of the thermal near field scattered by a probe

Performance improvement of radiation-based high-temperature fiber-optic sensor by means of curved sapphire fiber

Sapphire-Fiber Thermometer Ranging from 20 to 1800 °C

Hybrid Sapphire Dual-Fabry—Perot-Cavities Sensor for High Temperature and Refractive Index Measurement

Wavelength-selective and Diffuse Infrared Thermal Emission Mediated by Magnetic Polaritons from Silicon Carbide Metasurfaces

The Measurement of Near-Field Thermal Emission Spectra using an Infrared Waveguide

Non-contact temperature field measurement of solids by infrared multispectral thermotransmittance

Thermal lensing measurements of Ti: Sapphire crystal pumped at 80 MHz picosecond pulses by Shack-Hartmann wavefront sensor

Casimir-Polder effect with thermally excited surfaces

Development of Sapphire Optical Temperature Sensing System Used in Harsh Environment Sensing

Broadband nonreciprocal thermal emissivity and absorptivity

Multi-layer-combination Method to Retrieve High-Temperature Spectral Properties of C-plane Sapphire

High-efficiency dual-mode luminescence of metal halide perovskite Cs3Bi2Cl9:Er3+ and its use in optical temperature measurement with high sensitivity