Abstract:This paper carries out the mathematical modeling, simulation, and control law design for a quadrotor with variable-pitch propellers. The use of variable-pitch propeller for thrust variation instead of RPM regulation facilitates generation of negative thrust, thereby augmenting the rate of change of thrust generation amenable for aggressive maneuvering. Blade element theory along with momentum theory is used to estimate propeller thrust and torque essential for formulating equation of motion of the vehicle. The proposed flight dynamics model is used for non-linear control design using dynamic inversion technique, which is then used to stabilize, track reference trajectory, and simulate flip maneuver. The rotor torque is an irrational function of the control input which makes the control design challenging. To address this problem, the control design employs three loops. The outer loop solves the translational dynamics to generate the thrust, pitch angle, and roll angle commands required to track the prescribed trajectory. Using the command generated in the outer loop, the inner loop simplifies the rotational dynamics to provide the desired rate of angular velocities. A control allocation loop is added to address the problem of nonlinearity associated with rotor torque. This is done by introducing the derivative of thrust coefficient as a virtual control input. These virtual inputs determine the derivatives of thrust and body moments, which in turn is used to generate the required thrust and body moments. The concept is validated by showing attitude stabilization in real flight for a variable pitch quadrotor. The performance of the proposed design is shown through simulated results for attitude stabilization and trajectory following. Reverse thrust capability of variable-pitch quadrotor is also shown by performing flip maneuver in which quadrotor roll angle changes from 0 to 180 degrees.

Geometry Enhanced Optimal Control Technique for Acrobatic Flip Motion of Quadcopter

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

The Simulation Research on Optimizing Attitude Control for Quadrotor

Robust-augmentation Nonlinear Dynamic Inversion Control of Over-Actuated Coaxial High-Speed Helicopter in Transition Mode

Dynamics Analysis and Control of Coaxial High-Speed Helicopter in Transition Flight

Cascaded Trajectory Tracking Control for A Quadcopter UAV with Consideration of Actuator Dynamics

Cobra aerobatic flight for quadrotors using θ-D nonlinear control

Modeling and Control of Inverted Flight of a Variable-Pitch Quadrotor

Geometric Adaptive Robust Hierarchical Control for Quadrotors With Aerodynamic Damping and Complete Inertia Compensation

Quaternion Based Geometric Control of Quadrotor UAV

Towards Model Predictive Control for Acrobatic Quadrotor Flights

Flight Control for Quadrotor Safety in the Presence of CoG Shift and Loss of Motor Efficiency

A Geometric Approach for Quadrotor Trajectory Tracking Control

Globally-Attractive Logarithmic Geometric Control of a Quadrotor for Aggressive Trajectory Tracking

Optimal Sliding Gaussian Control of Quadrotor with a Flexible Structure

Structure Design and Control of a Novel Tilt-rotor Quadrotor with Thrust Vectoring

Unified incremental nonlinear controller for the transition control of a hybrid dual-axis tilting rotor quad-plane

Quadrotor attitude control with a modified fixed‐time synergetic controller: A geometric analysis and experimental validation

Mathematical Derivation and Simulational Verification for Aggressive Quadrotor Perching Control

A Multi-Phase DMOC-based Optimal Trajectory Generation Methodology for a Quadrotor

Control of Complex Maneuvers for a Quadrotor UAV using Geometric Methods on SE(3)