Abstract:In this paper, we describe the implementation and experimental validation of iterative real-time optimization (RTO) at a continuously operated membrane separation pilot plant. The objective is to achieve an economically optimal operation using the transmembrane pressure and the feed flow rate as adjustable operational parameters (set-points for the lower-level plant controllers). In spite of the popularity of RTO based on rigorous nonlinear plant models in the research literature, its practical use so far remains limited to large scale plants in the petrochemical industries. The main issue behind the limited application of RTO schemes is the necessary effort to derive and maintain sufficiently accurate models of the plants. In case of a significant plant-model mismatch, the results are not reliable, the optimal performance is not reached and even systematic violations of constraints may occur. The applicability of RTO could be extended significantly if simple process models sufficed for its successful application. Then an adaptation of the model or of the optimization problem to the real behavior of the plant is necessary to achieve an optimal operation. For this example, we tackle this issue by applying an iterative scheme called modifier-adaptation with quadratic approximation in combination with model adaptation to ensure the convergence of the plant to the true process optimum despite the fact that the model has deficiencies. The experimental results show that, in spite of a considerable plant-model mismatch, the presented RTO scheme is capable of boosting the process economics.

ARRTOC: Adversarially Robust Real-Time Optimization and Control

A Retrofit Hierarchical Architecture for Real-Time Optimization and Control Integration

Operational Optimal Tracking Control for Industrial Multirate Systems Subject to Unknown Disturbances

Efficient Zero-Order Robust Optimization for Real-Time Model Predictive Control with acados

From Real-Time Optimization Techniques to an Autopilot for Steady-State Processes

A Real-Time Optimization Framework for the Time-Varying Economic Environment

Time-Optimal Constrained Adaptive Robust Control of Single-DOF Mechanical Systems: A Comparative Study with BLF-based Methods

ECCBO: An Inherently Safe Bayesian Optimization with Embedded Constraint Control for Real-Time Optimization

Real-time Optimization for Chemical Processes Based on On-Line Modeling of Controlled Variables

On an Aspect of Implementing Real-Time Optimization: Establishing the Suspending and Activating Conditions Incorporating Process Monitoring

Globally Optimal Dynamic Real Time Optimization Without Model Mismatch Between Optimization and Control Layer

Online Optimization-Based Time-Optimal Adaptive Robust Control of Linear Motors with Input and State Constraints

Data-driven auto-tuning strategy for RTO-MPC based on Bayesian optimization

Real-time Optimization of Acetaldehyde Production Process

Direct Optimization Based Compensation Adaptive Robust Control of Nonlinear Systems with State and Input Constraints

Iterative Real-Time Optimization Scheme for Optimal Operation of Chemical Processes under Uncertainty: Proof of Concept in a Miniplant

The utilization of closed-loop prediction for dynamic real-time optimization

Iterative real-time optimization of a membrane pilot plant

Sufficient Conditions for Feasibility and Optimality of Real-Time Optimization Schemes - I. Theoretical Foundations

Implementation issues and experimental studies of adaptive robust controllers for robot manipulators

Adaptive Two-Degree-of-Freedom Robust Gain-Scheduling Control Strategy