Abstract:Tunable lasers, with the ability to continuously adjust their emission wavelengths, have found widespread applications across various fields such as biomedical imaging, coherent ranging, optical communications and spectroscopy. In these applications, a wide chirp range is advantageous for large spectral coverage and high frequency resolution. Besides, the frequency accuracy and precision also depend critically on the chirp linearity of the laser. While extensive efforts have been made on the development of many kinds of frequency-agile, widely tunable, narrow-linewidth lasers, wideband yet precise methods to characterize and to linearize laser chirp dynamics are also demanded. Here we present an approach to characterize laser chirp dynamics using an optical frequency comb. The instantaneous laser frequency is tracked over terahertz bandwidth with 1 MHz interval. Using this approach we calibrate the chirp performance of twelve tunable lasers from Toptica, Santec, New Focus, EXFO and NKT that are commonly used in fiber optics and integrated photonics. In addition, with acquired knowledge on laser chirp dynamics, we demonstrate a simple frequency-linearization scheme that enables coherent ranging without any optical or electronic linearization units. Our approach not only presents a novel wideband, high-resolution laser spectroscopy, but is also critical for sensing applications with ever-increasing requirements on performance.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the decline in frequency resolution, precision, and accuracy of widely tunable lasers in practical applications due to non - linear modulation. Specifically, the paper focuses on how to accurately characterize and linearize the chirp dynamics of widely tunable lasers to improve their performance in applications such as coherent ranging.
### Background and Problem Description
1. **Applications of Widely Tunable Lasers**
- Widely tunable lasers are widely used in many fields, such as biomedical imaging, coherent ranging, optical communication, and spectroscopy, because they can continuously adjust the emission wavelength.
- For example, optical coherence tomography (OCT) uses widely tunable lasers for high - resolution two - dimensional and three - dimensional tissue structure imaging; optical frequency - domain reflectometer (OFDR) uses tunable lasers for broadband loss and dispersion characteristic measurement; frequency - modulated continuous - wave (FMCW) LiDAR (Light Detection and Ranging) uses tunable lasers to measure the distance and speed of objects.
2. **Chirp Non - linearity Problem**
- In these applications, the chirp range of the laser determines the measurement resolution and spectral bandwidth. However, due to the non - linearity of laser gain and dynamics, tunable lasers usually exhibit chirp non - linearity, especially more seriously in a wide chirp range.
- Chirp non - linearity will cause the laser chirp rate to deviate from the set value, thus affecting the frequency resolution, precision, and accuracy.
### Solutions
1. **Characterization Method**
- The paper proposes a method based on an optical frequency comb (OFC) to characterize the chirp dynamics of widely tunable lasers. Through the optical frequency comb, the instantaneous frequency of the laser within the terahertz bandwidth can be tracked with a precision of 1 MHz.
- This method is applied to 12 different brands of tunable lasers, including Toptica, Santec, New Focus, EXFO, and NKT, etc., which are widely used in fiber optics and integrated photonics.
2. **Linearization Method**
- Based on the characterization results, the paper proposes a simple frequency linearization scheme, enabling coherent ranging to be achieved without any optical or electronic linearization units.
- By recalibrating the time axis of the beat - frequency signal, the pre - linearization of the laser is achieved, thereby improving the ranging precision and stability.
### Experimental Verification
1. **Laser Characterization**
- The paper describes in detail the experimental setup and data processing methods, including using an optical frequency comb and a digital band - pass filter to track the instantaneous frequency of the laser.
- By characterizing different brands and models of lasers, the optimal operating conditions for each laser are found.
2. **Coherent LiDAR Experiment**
- Based on the characterization and linearization methods, the paper conducts a coherent LiDAR experiment to verify the effectiveness of the methods.
- The experimental results show that the pre - linearized LiDAR system can measure distance more accurately, while the non - linearized system has a relatively large error.
### Conclusion
The paper successfully demonstrates the effectiveness of the method based on the optical frequency comb in characterizing and linearizing the chirp dynamics of widely tunable lasers. This method not only improves the performance of lasers in applications such as coherent ranging but also provides an important diagnostic tool for other fields that require high - precision lasers.