High-susceptibility nanoparticles for micro-inductor core materials

Mathias Zambach,Miriam Varón,Matti Knaapila,Ziwei Ouyang,Marco Beleggia,Cathrine Frandsen

2024-02-06

Abstract:According to the laws of magnetism, the shape of magnetically soft objects limits the effective susceptibility. For example, spherical soft magnets cannot display an effective susceptibility larger than 3. Although true for macroscopic multi-domain magnetic materials, we show that magnetic nanoparticles in a single-domain state do not suffer from this limitation. This is a consequence of the particle moment being forced to saturation by the predominance of exchange forces, and only allowed to rotate coherently in response to thermal and/or applied fields. We apply statistical mechanics to determine the static and dynamic susceptibility of single-domain particles as a function of size, temperature and material parameters. Our calculations reveal that spherical single-domain particles with large saturation magnetisation and small magneto-crystalline anisotropy, e.g. FeNi particles, can have very a large susceptibility of 200 or more. We further show that susceptibility and losses can be tuned by particle easy axis alignment with the applied field in case of uniaxial anisotropy, but not for particles with cubic anisotropy. Our model is validated experimentally by comparison with measurements on nanocomposites containing spherical 11$\pm$3 nm $\gamma$-Fe$_2$O$_3$ particles up to 45 vol% finely dispersed in a polymer matrix. In agreement with the calculations for this specific material, the measured susceptibility of the composites is up to 17 ($\gg$3) and depends linearly on the volume fraction of particles. Based on these results, we predict that nanocomposites of 30 vol% of superparamagnetic FeNi particles in an insulating non-magnetic matrix can have a sufficiently large susceptibility to be used as micro-inductor core materials in the MHz frequency range, while maintaining losses below state-of-the-art ferrites.

Mesoscale and Nanoscale Physics,Applied Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop nanoparticle materials with high magnetic susceptibility for use as core materials in micro - inductors. Specifically, the authors aim to overcome the limitations of traditional multi - domain magnetic materials in miniaturization and high - frequency applications, especially the problem of efficiency degradation due to eddy - current losses.

### Main problems:

1. **Requirement for efficient micro - inductors**:
- Power control in miniature devices (such as handheld devices) requires efficient inductors.
- Miniaturization makes it difficult for traditional magnetic materials to maintain sufficient inductive performance.

2. **Limitations of existing materials**:
- Existing magnetic materials heat up rapidly and become inefficient at high frequencies, mainly due to eddy - current losses.
- In order to achieve efficient micro - inductors, the magnetic susceptibility of the core material needs to be higher than 50 - 100, and the loss at a frequency of 2 MHz and a magnetic flux density of 30 mT should be less than 200 mW/cm³.

3. **Potential of single - domain nanoparticles**:
- The paper explores whether single - domain nanoparticles can overcome the limitations of traditional multi - domain materials, especially how to avoid the limitation of effective magnetic susceptibility caused by shape anisotropy (for example, the effective magnetic susceptibility of spherical multi - domain magnets cannot exceed 3).
- Through theoretical calculations and experimental verification, the static and dynamic magnetic susceptibilities of single - domain nanoparticles were studied, especially their performance under different sizes, temperatures and material parameters.

### Solutions:

- **Theoretical framework**: A framework for calculating the DC and AC magnetic susceptibilities of single - domain magnetic nanoparticles was established, taking into account possible demagnetization effects and the magnetic susceptibilities of blocked and superparamagnetic single - domain particles.
- **Experimental verification**: The composite magnetic susceptibility of 11 ± 3 nm γ - Fe₂O₃ nanoparticles dispersed in a polymer matrix was measured experimentally to verify the theoretical prediction.
- **Material selection and optimization**: It is recommended to use approximately 9 nm FeCo or approximately 20 nm FeNi particles as ideal candidate materials for high - magnetic - susceptibility applications (such as micro - inductor core materials).

### Key conclusions:

- The magnetic susceptibility of single - domain nanoparticles is not limited by the demagnetization effect of traditional multi - domain materials and can reach very high values (for example, the magnetic susceptibility of FeNi particles can reach more than 200).
- By adjusting the alignment of the easy - axis direction of the particles with the applied magnetic field, the magnetic susceptibility and loss can be further optimized.
- It is predicted that a nanocomposite containing approximately 30 volume percent FeNi particles can be used as a micro - inductor core material in the MHz frequency range while maintaining losses lower than existing ferrite materials.

In conclusion, this paper demonstrates the great potential of single - domain nanoparticles as efficient magnetic materials in high - frequency applications through a combination of theoretical and experimental methods.