Abstract:Due to their high energy density (2600 Wh/kg), low cost, and low environmental impact, lithium-sulfur batteries are considered a promising alternative to lithium-ion batteries. However, their commercial viability remains a formidable scientific challenge mainly because of the sluggish reaction kinetics at the cathode and the so-called "shuttling effect" of soluble polysulfides, which results in capacity decay and a shortened lifespan. Herein, molecular imprinting with Li$_2$S$_8$ as a target molecule in combination with a two-dimensional material, MXene, is proposed to overcome these issues. Molecularly imprinted polymer-coated nitrogen-doped Ti-based MXene was successfully synthesized and demonstrated to exhibit an appealing electrochemical performance, namely a high specific capacity of 1095 mAh/g at 0.1 C and an extended cycling stability (300 mAh/g at 1.0 C after 300 cycles). X-ray photoelectron spectroscopy was applied to elucidate the underlying mechanisms and proved that Li$_2$S$_8$-imprinted polymer polyacrylamide serves as a polysulfide trap through strong chemical affinity towards the long-chain lithium polysulfides, while N-doped Ti-based MXene promotes the redox kinetics by accelerating the conversion of lithium polysulfides. This distinct interfacial strategy is expected to result in more effective and stable Li-S batteries.

What problem does this paper attempt to address?

This paper attempts to address the main challenges faced by lithium - sulfur batteries (Li - S batteries) in practical applications, namely the slow cathode reaction kinetics and the so - called "shuttle effect". Specifically: 1. **Slow reaction kinetics**: Due to the insulating properties of sulfur and its discharge products (such as $\text{Li}_2\text{S}_2$ and $\text{Li}_2\text{S}$), the electrode reaction kinetics of lithium - sulfur batteries is very slow, which will cause large electrode polarization and poor rate performance. 2. **Shuttle effect**: During the discharge process, soluble lithium polysulfides ($\text{Li}_2\text{S}_x$, where $2 < x < 8$) will be generated at the cathode. These polysulfides will migrate in the electrolyte and react at the anode, leading to battery capacity decay and shortened lifespan. To overcome these problems, the authors proposed a method combining molecularly imprinted polymers (MIP) and two - dimensional material MXene. Specifically, they used nitrogen - doped $\text{Ti}_3\text{C}_2\text{T}_x$ (N - $\text{Ti}_3\text{C}_2\text{T}_x$) as the substrate and coated a molecularly imprinted polymer with $\text{Li}_2\text{S}_8$ as the template molecule on its surface. This composite material can effectively capture long - chain lithium polysulfides, thereby suppressing the shuttle effect and improving the reaction kinetics by accelerating the conversion of lithium polysulfides. The experimental results show that this new cathode material exhibits excellent electrochemical properties, including a high specific capacity (1095 mAh g$^{-1}$ @ 0.1 C) and good cycling stability (300 mAh g$^{-1}$ @ 1.0 C, after 300 cycles). X - ray photoelectron spectroscopy (XPS) analysis further confirmed that the $\text{Li}_2\text{S}_8$ - imprinted polymer polyacrylamide plays a capture role through strong chemical affinity with long - chain lithium polysulfides, and nitrogen - doped $\text{Ti}_3\text{C}_2\text{T}_x$ promotes the kinetics of redox reactions. In conclusion, this study proposes an effective strategy. By combining molecular imprinting technology and two - dimensional material MXene, the performance of lithium - sulfur batteries is significantly improved, which is expected to promote their commercialization process.

Nitrogen-Doped Ti$_3$C$_2$T$_x$ Coated with a Molecularly Imprinted Polymer as Efficient Cathode Material for Lithium-Sulfur Batteries

3D Net-like GO-d-Ti3C2Tx MXene Aerogels with Catalysis/Adsorption Dual Effects for High-Performance Lithium-Sulfur Batteries

Rational Design of Nitrogen-Doping Ti3C2Tx Microspheres with Enhanced Polysulfide Catalytic Activity for Lithium-Sulfur Batteries

Carbon@titanium Nitride Dual Shell Nanospheres As Multi-Functional Hosts for Lithium Sulfur Batteries

Rational design of MXene@TiO<sub>2</sub>nanoarray enabling dual lithium polysulfide chemisorption towards high-performance lithium-sulfur batteries

Ultrathin MXene Nanosheets Decorated with TiO2 Quantum Dots As an Efficient Sulfur Host Toward Fast and Stable Li-S Batteries

Design and Synthesis of Novel Pomegranate-Like TiN@MXene Microspheres As Efficient Sulfur Hosts for Advanced Lithium Sulfur Batteries

Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen-Doped Carbon Enables High-Performance Lithium-Sulfur Battery Cathodes

Properties of S-Functionalized Nitrogen-Based MXene (Ti2NS2) as a Hosting Material for Lithium-Sulfur Batteries

MXene‐Derived Ti n O 2 n− 1 Quantum Dots Distributed on Porous Carbon Nanosheets for Stable and Long‐Life Li–S Batteries: Enhanced Polysulfide Mediation via Defect Engineering

TiO2-TiN Decorated Carbon Nanoplates Derived from NH2-MIL-125 with Efficient Polysulfide Catalytic Conversion for Long-Life Lithium-Sulfur Batteries

Investigating the Electrocatalysis of Ti3C2/Carbon Hybrid in Polysulfide Conversion of Lithium-Sulfur Batteries.

Sulfydryl-modified MXene as a sulfur host for highly stable Li-S batteries

Facile Synthesis of Sulfur@titanium Carbide Mxene As High Performance Cathode for Lithium-Sulfur Batteries

A Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene-carbon nanocage-sulfur cathode with high conductivity for improving the performance of Li-S batteries

In Situ Formed Protective Barrier Enabled by Sulfur@Titanium Carbide (mxene) Ink for Achieving High-Capacity, Long Lifetime Li-S Batteries.

Nitrogen-doped microporous carbon with narrow pore size distribution as sulfur host to encapsulate small sulfur molecules for highly stable lithium-sulfur batteries

Hollow multishelled structural TiN as multi-functional catalytic host for high-performance lithium-sulfur batteries

Rational Design of Porous Nitrogen-Doped Ti3C2 MXene As a Multifunctional Electrocatalyst for Li–S Chemistry

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries