Mechanical design of the optical modules intended for IceCube-Gen2

Yuya Makino

2023-08-19

Abstract:IceCube-Gen2 is an expansion of the IceCube neutrino observatory at the South Pole that aims to increase the sensitivity to high-energy neutrinos by an order of magnitude. To this end, about 10,000 new optical modules will be installed, instrumenting a fiducial volume of about 8 km^3. Two newly developed optical module types increase current sensitivity per module by a factor of three by integrating 16 and 18 newly developed four-inch PMTs in specially designed 12.5-inch diameter pressure vessels. Both designs use conical silicone gel pads to optically couple the PMTs to the pressure vessel to increase photon collection efficiency. The outside portion of gel pads are pre-cast onto each PMT prior to integration, while the interiors are filled and cast after the PMT assemblies are installed in the pressure vessel via a pushing mechanism. This paper presents both the mechanical design, as well as the performance of prototype modules at high pressure (70 MPa) and low temperature (-40 degree Celsius), characteristic of the environment inside the South Pole ice.

Instrumentation and Methods for Astrophysics,High Energy Astrophysical Phenomena

What problem does this paper attempt to address?

### What problems does this paper attempt to solve?

This paper aims to solve how to design and develop the optical modules (OM) of the new - generation IceCube - Gen2 neutrino observatory to significantly improve the detection sensitivity of high - energy neutrinos. Specifically, the IceCube - Gen2 plan is to expand the effective volume of the detector to about 8 km³ by installing approximately 10,000 new optical modules and make the sensitivity of each module four times higher than that of the current IceCube digital optical module (DOM).

#### Main challenges include:
1. **Compact design and high sensitivity**: Achieve extremely high single - module sensitivity while keeping the module diameter at 12.5 inches.
2. **Environmental adaptability**: Ensure that the module can withstand the extreme conditions inside the Antarctic ice sheet, such as low temperature (- 40°C) and high pressure (70 MPa).
3. **Long - term reliability**: Ensure that the module has extremely high reliability after deployment, because once deployed, these modules cannot be physically maintained.
4. **Production feasibility**: Ensure that the design scheme not only meets the performance requirements but also can be realized in large - scale production.

### Overview of solutions:
To achieve these goals, the researchers developed two new optical module designs, which contain 16 and 18 newly - developed four - inch photomultiplier tubes (PMT) respectively. These PMT are integrated into a specially - designed 12.5 - inch - diameter pressure vessel and are optically coupled using conical silicone gel pads to improve photon collection efficiency. In addition, the paper details the design, prototype testing, and performance of these modules in high - pressure and low - temperature environments.

Through these improvements, the optical modules of IceCube - Gen2 are expected to achieve a sensitivity four times higher than that of the existing IceCube DOM, thereby significantly enhancing the detection ability of high - energy neutrinos.