A Review of Space Tribology Experiments in Low Earth Orbit: Challenges and Opportunities

Dhanushka Subath Amaradasa Hewaralalage,Ian Sherrington,Nathalie Renevier,Mara Bernabei,Ali Ghanbari

2023-08-18

Abstract:Operating mechanical devices in low earth orbit (LEO) environment presents unique challenges due to adverse effects of the LEO environment on lubricants and materials in tribo-mechanisms. These challenges include corrosion due to atomic oxygen, molecular degradation of materials and fluids due to radiation, temperature extremes influencing lubricant viscosity, and rapid evaporative loss of fluids in vacuum conditions. Therefore, lubricants for mechanisms and components such as bearings and gears for spacecraft should be tested extensively in both air and vacuum to ensure their continuous and accurate function. Literature on ground based tribo-testing is extensive and well-established. However, tribological investigations conducted in LEO are much fewer in number. The purpose of this paper is to draw together details of tribology experiments of this type, to try to clarify their purpose and value. This review presents these studies according to a thematic categorization of the mechanisms involved.

Instrumentation and Methods for Astrophysics

What problem does this paper attempt to address?

The problems that this paper attempts to solve are: the unique challenges faced by lubrication and materials of mechanical devices in the low - Earth - orbit (LEO) environment. Specifically, these problems include:

1. **Atomic oxygen corrosion**: Atomic oxygen (AO) is a highly reactive form of oxygen in LEO, which can cause erosion and degradation of polymers and lubricants, thus affecting their performance and durability.

2. **Radiation effects**: Radiation in LEO (including ionizing and non - ionizing radiation) can accelerate the aging of materials and lubricants, leading to a decline in their performance.

3. **Evaporation loss in vacuum conditions**: The vacuum environment can cause lubricants to evaporate rapidly, resulting in lubrication failure. According to the Langmuir equation, the free evaporation rate of a fluid in vacuum conditions can be expressed as:
\[
R=\frac{p}{\sqrt{2\pi M k_{B}T}}
\]
where \(p\) is the vapor pressure, \(M\) is the molecular mass, \(k_{B}\) is the Boltzmann constant, and \(T\) is the absolute temperature.

4. **Effects of extreme temperatures**: The temperature in LEO fluctuates over a very wide range. Changes from low to high temperatures can affect the viscosity of lubricants, which in turn affects friction and wear characteristics. For example, the viscosity of lubricants increases at low temperatures, resulting in greater friction losses.

5. **Micro - gravity environment**: The micro - gravity environment can affect the movement of liquid lubricants on solid surfaces and may cause wear debris to contaminate other components.

To ensure the reliability and accuracy of spacecraft mechanisms (such as bearings and gears) under these extreme conditions, lubricants must be extensively tested to ensure their continuous function in air and vacuum conditions. However, at present, there are relatively few studies on tribology experiments in LEO. Therefore, this paper aims to summarize and analyze these experiments, evaluate their purposes and values, so as to support the success of future space missions.