Abstract:Consideration of a core and mantle configuration for individual grains is a prominent method to capture the grain size-dependence in the constitutive models for polycrystal material. The mantle represents a region of the grain volume near the grain boundary where mechanical deformation is influenced by the grain boundaries, while the core represents the inner region of the grain volume. The grain size-dependence is then realized by assigning a set of values for the mechanical properties in the mantle that are different from those of the core region. However, these values for the mechanical properties of the mantle region are typically chosen arbitrarily, guided solely by the quality of the agreement between a model's predicted stress-strain behavior with that obtained experimentally. In the present study, a physics-based method to develop the grain size-dependent crystal plasticity constitutive model on the core and mantle configuration for polycrystal materials is presented. The method is based on the assumption that any resistance to dislocation nucleation and motion in a material manifests as an increase in yield strength and a decrease in strain-hardening modulus, and the mutual relationship between yield strength and strain-hardening is an inherent material property that determines the plasticity of that specific material. Accordingly, the same single crystal plasticity constitutive model that describes the behavior of the material under loading can be used to capture the increased resistance to dislocation nucleation and motion in the grain boundary influence region. The physics-based modeling is facilitated by introducing a shear flow strain distribution in the phenomenological formulation and a pile-up of dislocation density distribution in the dislocation based formulation, such that, the resulting variations in the yield strength and the strain-hardening modulus are identical to that produced by the increased resistance in the grain boundary influence region. Thus, the increase in strength and the decrease in the strain-hardening modulus, determined as spatially varying local material properties in the mantle, are mutually related through the grain size-independent inherent plastic properties specific to the material. A simplified model that considers the grain boundary effect averaged over the grain volume is also developed under this general framework. Implementation of this simplified model is demonstrated by considering the case of a power law flow rule and a hyperbolic-secant hardening rule for the phenomenological formulation, and Taylor strength relation for the dislocation based formulation. Finally, the grain size-dependent constitutive model is validated by comparing the predicted stress-strain behavior of polycrystal copper samples under uniaxial loading with experimental results.

Towards the Distribution of a Class of Polycrystalline Materials with an Equilibrium Defect Structure by Grain Diameters: Temperature Behavior of the Yield Strength

Two-phase model of the polycrystalline aggregate with account for grain-boundary states under quasi-static deformation

Anisotropy of Yielding/Hardening and Micro-Inhomogeneity of Deforming/Rotating for A Polycrystalline Metal under Cyclic Tension Compression

Investigation on Plastic Flow Behaviors of FCC Polycrystalline Aluminum under Pre-Cyclic Tension-Compression Loading: Experiments and Crystal Plasticity Modeling.

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

Evolution of Defect Concentration in Zr50–xCu34Ag8Al8Pdx (x = 0, 2) Amorphous Alloys Derived Using Shear Modulus and Calorimetric Data

On the yielding of a defect-rich model crystal under shear: insights from molecular dynamics simulations

Grain size-dependent crystal plasticity constitutive model for polycrystal materials

Recoverable Creep Deformation and Transient Local Stress Concentration Due to Heterogeneous Grain-Boundary Diffusion and Sliding in Polycrystalline Solids

Grain Interaction and Elastic Strain Distribution in Polycrystalline Materials

Unified Model for Size-Dependent to Size-Independent Transition in Yield Strength of Crystalline Metallic Materials.

Plastic yielding and deformation bursts in the presence of disorder from coherent precipitates

A Dislocation Density-Based Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

A Dislocation Density Approximation for the Flow Stress—grain Size Relation of Polycrystals

Strengthening Mechanism in Micro-Polycrystals with Penetrable Grain Boundaries by Discrete Dislocation Dynamics Simulation and Hall–Petch Effect

Modeling of Temperature- and Stress State-Dependent Yield and Fracture Behaviors for Mg-Gd-Y Alloy

Mechanical properties of crystalline-amorphous composites: generalisation of Hall-Petch and inverse Hall-Petch behaviours

Deformation-induced grain rotation and grain boundary formation achieved through dislocation-disclination reactions in polycrystalline hexagonal close-packed metals

Physical mechanism interpretation of polycrystalline metals’ yield strength via a data-driven method: A novel Hall–Petch relationship

Theoretical approach to the ductile fracture of polycrystalline solids