Traceable characterisation of fibre-coupled single-photon detectors
Luke Arabskyj,Philip Dolan,Adam Parke,Ted Santana,Simon Hall,Geiland Porrovecchio,Marek Smid,Marco Lucamarini,Christopher Chunnilall
DOI: https://doi.org/10.1088/1681-7575/ad70bc
2024-08-21
Metrologia
Abstract:The detection of single photons plays an essential role in advancing single-photon science and technologies. Yet, within the visible/near-infrared (vis/NIR) spectral region, accurate fibre-based optical power measurements at the few-photon level are not yet well-established. In this study, we report on a fibre-based setup, enabling traceable optical power measurements at the few-photon level in this spectral region. The setup was used to calibrate the detection efficiency (DE) of four single-photon avalanche diode (SPAD) detectors. The absolute standard uncertainties on the mean DE values ranged from 0.20% to 0.27% (k = 2). However, the standard deviation of DE values over repeat fibre couplings, which are at least twice these values, pose a challenge for the metrology of these devices and applications which require high accuracy and repeatability. We investigated the source of these variations by spatially mapping the response of a detector's fibre connector port, using a focused free-space beam, allowing us to estimate the detector's spatial non-uniformity. In addition, we realise a novel calibration approach for fibre-coupled SPADs in a free-space configuration, enabling a direct comparison between the fibre-based setup and the National Physical Laboratory's established free-space facility using a single SPAD. Finally, we investigated alternative coupling methods, testing the repeatability of different fibre-to-fibre connectors in addition to direct fibre-to-detector couplings: SPADs from three manufacturers were tested, with both single-mode and multi-mode fibre.
instruments & instrumentation,physics, applied