Abstract:Power losses in electrical power systems especially, distribution systems, occur due to several environmental and technical factors. Transmission & Distribution line losses are normally 17% and 50% respectively. These losses are due to the inappropriate size of the conductor, long distribution lines, low power factor, overloading of lines etc. The power losses cause economic loss and reduce the system's reliability. The reliability of electrical power systems can be improved by decreasing network power loss and by improving the voltage profile. In radial distribution systems, power loss can also be minimized through Distributed Generation (DG) system placement. In this thesis, three different grid strategies including real power sharing, reactive power injection and transformer tap changing are discussed and used to minimize line losses. These three proposed grid strategies have been implemented using a power flow study based on Newton-Raphson (NR) and Genetic Algorithm (GA). To minimize line losses, both methods have been used for each grid strategy. The used test system in this research work is the IEEE-30 bus radial distribution system. Results obtained after simulation of each grid strategy using NR and GA shows that real load sharing is reliable with respect to minimization of line loss as compared to reactive power injection and transformer tap changing grid strategy. Comparative analysis has been performed between GA and NR for each grid strategy, results show that Genetic Algorithm is more reliable and efficient for loss minimization as compared to Newton-Raphson. In the base case for optimum power flow solution using genetic algorithm and Newton-Raphson, real line losses are 9.481475MW and 17.557MW respectively. So, GA is preferable for each proposed grid strategy to minimize line losses than NR.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the minimization of power loss in the distribution network. Specifically, the author explores reducing the line losses in the distribution network through different power grid strategies, thereby improving the economy and reliability of the system. ### Research Background and Problem Description Power losses in the distribution system are caused by a variety of environmental and technical factors, including inappropriate conductor sizes, overly long distribution lines, low power factors, and line overloading. These losses not only lead to economic losses but also reduce the reliability of the system. In order to improve the reliability and voltage quality of the power system, reducing network power losses is crucial. ### Main Objectives of the Paper 1. **Research and understand different power loss minimization techniques**: Through literature review and theoretical analysis, understand the existing power loss minimization methods. 2. **Implement power grid strategies to minimize line losses in the distribution network**: Use the Newton - Raphson (NR) method and the genetic algorithm (GA) to implement three power grid strategies: - Real Power Sharing - Reactive Power Injection - Transformer Tap Changing 3. **Compare the effects of different methods**: Compare the performance of NR and GA under each power grid strategy and evaluate their effectiveness in minimizing actual line losses. ### Specific Problems and Solutions - **Real Power Sharing**: Reduce line losses by distributing the load of high - load nodes to low - load nodes. - **Reactive Power Injection**: Inject reactive power at low - voltage nodes to improve the voltage distribution and reduce line losses. - **Transformer Tap Changing**: Optimize the voltage level by adjusting the tap position of the transformer, thereby reducing line losses. ### Research Results Through the simulation of the IEEE - 30 bus test system, the author found that: - Among all the proposed power grid strategies, Real Power Sharing is the most reliable in reducing line losses. - The genetic algorithm (GA) is more effective and reliable than the Newton - Raphson (NR) method, especially in optimal power flow calculations. For example, in the benchmark case, the actual line loss obtained by the optimal power flow solution of GA is 9.481475 MW, while the loss obtained by the NR method is 17.557 MW. In summary, this paper successfully reduces the line losses in the distribution network and improves the economy and reliability of the system by proposing and validating three power grid strategies and using GA and NR methods for simulation.

Power Loss Minimization of Distribution Network using Different Grid Strategies

Distribution Network Reconfiguration Together with Distributed Generator and Shunt Capacitor Allocation for Loss Minimization

Optimal Reconfiguration and Distributed Generator Allocation in Distribution Network Using an Advanced Adaptive Differential Evolution.

Optimization of Demand Response and Power-Sharing in Microgrids for Cost and Power Losses

Impact Analysis of Microgrid in Minimization of Distribution System Losses

An intelligent optimization technique for performance improvement in radial distribution network

Optimal Placement and Power Supply of Distributed Generation to Minimize Power Losses

Capacitors in radial distribution network

Power Loss Minimization and Voltage Profile Improvement by System Reconfiguration, DG Sizing, and Placement

Research on loss reduction strategy of distribution network based on distributed generation site selection and capacity

Real Power Loss Minimization Considering Multiple DGs and Battery in Distribution System

Applications of Recent Metaheuristic Algorithms for Loss Reduction in Distribution Power Systems considering Maximum Penetration of Photovoltaic Units

Loss allocation in distribution systems considering system power factor and local generators

A multiobjective approach for optimal placement and sizing of distributed generators and capacitors in distribution network.

Power distribution system reconfiguration based on genetic algorithm

An Innovative Power Loss and Cost Minimization Framework for Distribution Networks With Uncertain Variable Loads by Coordinating Reconfiguration, Capacitor Installation and Renewable Generators Placement

An Effective Formulation for Minimizing Distribution Network Costs Through Distributed Generation Allocation in Systems With Variable Loads

Line Loss Reduction with Optimal Placement of DGs by using Contingency Analysis of 5 bus system

Puma optimizer technique for optimal planning of different types of distributed generation units in radial distribution network considering different load models

Distributed Power Loss Minimization in Residential Micro Grids: a Communications Perspective

Improved Manta Ray Foraging Algorithm for Optimal Allocation Strategies to Power Delivery Capabilities in Active Distribution Networks